Powerus FTW I've been telling guy's about this amp for almost 3 years now BEST BRAZILIAN AMP HANDS DOWN I'VE OWN BANDA,SOUNDIGITAL ,TARAMPS NO COMPARISON my 10k clamped over 15k 😁😁👍👍👍👍
...I think the md12000.1 amplifier ( the 1 ohm version) is one of the best amplifiers ever made. I played with the powerus, and banda, and they're all great, but that taramps md12000.1 at 1 ohm just seem to be relentless on a pair of sundown zv5 subs.
Stetsom amps are good alot of people talk trash about them. I sell and install them once your electrical is good and clean rca signal your fine. I notice lots if guys try to run them for bass and to me they are not intended for that but mids and highs stetsom is great!
@ *Luke_784 Low Frequency* Thanks for the input, interestingly enough I was using my Stetsom venom 800.4 which is not specifically an amplifier for Bass but I was using it with my Sundown 15” subwoofer been playing down to 10 Hz at full tilt many times. And have not caused me any issues whatsoever. I was skeptical on doing that but it withstood the test of time. I recently bought a Taramps Smart3 so now I’m using the Venom 800.4 for the midbass and vocals.
So $1000 for the amp and another $3000 for the high output alternators and batteries needed to run it. Time to start playing the lotto again. Glad you're back.
Full bridge amps flexing their advantage, glad to see the movement and advancement in them in the US. Hoping and waiting to see you test out Wolfram's O series amps. Glad to see you back as well, its been a while!
Where you been? I got hooked on your videos about 3 months ago and binge watched almost your videos. Even you bench pressing. Welcome back you make some good content.
Powerus is a legit full range Brazilian made amp. That limiter is technology i first seen on the kicker warehorse. A lot of companies now make full range amplifiers. So for my dollars Korean always on my lows (80hrz ! No no no 👎) with the full range to match. Great video!
I dont understad why the people always complains about the filter on these amps, they are full range but now days every almost head units have LOWpass filters, so you can run your FR amp and cut the freq by the Headunit... and is if not enough, you can run a crossover or DSP, so.. whats the big deal?
@@mauromuller6649 for my setup Korean on the subs! Nowadays guys are more and more falling back to Korean boards because the Brazilian boards just can't produce the lows. You mentioned a head unit to make up for the amp's inability to produce 🤔. That's funny!
@@Mr.NpK143 that's absolutely not true, and just typical FB talk. Full range, full bridge amplifiers, play low end frequencies just as well, as half bridge. Just ask, "Mr 15hz" lol... and he runs Taramps.
@@Chuck_Sanders prove it wrong! Chris @ CrazyHobbies just got rid of to Sound Digital 12ks. I is actually up for a raffle on his RUclips channel. Go ahead and check him out. He'll vouch he clamped 7k out of each 12k. Was he playing the lows? Hell yeah, but what happened to the other 5k? Needless to say he switched out to 4 oth the jp63s and has since upgraded to 4 of the jp83s for his new build. He like myself Korean is just the way on the lows! And dig this! I wont even chsrge you 👌
@@Mr.NpK143 you are the one bitching, about full range amplifiers. They play low end frequency just fine, and just the same. Your just another FB groupie, using the same old, passed around garbage info. You prove me wrong? I won't charge you. You make the argument, back it up? Whatever frequency is being fed, into the amplifier, it'll play. FULL RANGE plays all frequencies. That 80hz crossover, doesn't mean that's where it starts... haha. Damn
It's highly impractical that most people would have enough alternator to support this at 14.4V but it should be quite doable with a decent Lithium as those will hold ~13V for extended periods of time.
These comments crack me up. So many rude people not understanding ohm's law, I'm worried for people buying amps like this, let alone hooking up their own electrical. Thanks for the dyno, that was enlightening and very informative. I have to Orion hcca 3ks clamping just under 15k @15v, 1ohm each amp, on 160ah LTO, and I have 4 runs of 2/0. Beast amps for the price. I'm doing a new build that a lot bigger and was thinking about adding 2 more of my current amps or getting some of these powerus amps. They are stout that's for sure! I haven't had good experiences with any full bridges I've had. This looks promising tho.
Welding is mostly done with DC not AC like the audio output... pedantic I know but worth pointing out. Also why an AMP can kill you with a mere 80 volts... AC passes through the body easily DC does not.
10k watts @ 12.7v is impressive! Again, the Brazilians have no idea how to size their power inputs, but I guess you could get your own quad 1/0 input terminals. This should really have three 1/0 inputs for 10k watts. I would still rather have the Wolfram half bridge Korean, but this Powerus amp surprised me for sure. Good video Ryan. Glad to see you making content here and there.
They dont need quad inputs, they know exactly what they're doing. A good full bridge amp is more efficient than a half bridge of the same size, thats why they dont need triple inputs on an 8k amp.
I built 10kw pwm amps when i was 21 and Just graduated from university in Holland which is pretty much mit ober there. My thesis was about amplification under certain circumstances.. Goals where over 90% eff and minimal use capacitance and transistors (mos-fets). Worked out Just fine with 1989 fets. So Why wouldn't it work now with over three decades of developement in Electronic......
Not familiar with that brand. But I took a chance on Stetsom with a 6k first now an 8k and I rock custom made subs with 4 inch coils with the exception of my new 18 inch kicker solo X motors on 15 inch frames. So I beat the crap out of my amps playing the lows to Extended low bass tracks and 18-28 hz test tones. I have the Alt and batt Power my stuffs stays lukewarm to warm. Only thing that heats up is my headunit :) my sub builder warned me about Brazilian audio now including me a lot of his customers are rocking Brazilian amps and now he is a believer though he still says Wolfram is worth the money if you got it. Ya was wondering what happened to ya!? Keep it going man!!
If you have the right kind of lithium cells, or a lot of good AGM batteries, this isn't too hard to run. Less than $500 worth of A123 cells from battery hookup would do 1000 amps continuous no problem, or a big bank of headway 38120's. A few big Northstar AGM batteries would also do the trick. Lots of people have the 12k version of the Taramps MD series, and the Wolfram 7.5k that does well over 9k watts, amongst others like Sundown's NS1 or NS2 or the Salt 12k's. You might need 2 or 3 big alternators, but I think the people who would buy this amp know they need a ton of juice to run it. It would be a fun science experiment to mess with this kind of stuff if you have the extra money to play with. Im not personally in that boat, but I still plan on building a decent lithium battery for my little 3k amplifier. I can do $300- $400 on that to play with lol.
Whole lot of power 🔥💪✅ BassGod ( RUclips channel ) runs these amps and is also a dealer... Can you make an Amp Dyno video w/ different gain overlap settings and show wattage output difference? Basically do 3 certified dyno runs with 0db overlap , 5db overlap & 10db overlap on the same amp at the same 4, 2, & 1 ohm!
There is an amp that I would like to see on the dyno in a video that is made by someone other than the company that makes the amp. The skar rp1500. I absolutely love your channel and I would love it even more if you would make a vid on the rp1500
Great vid dude I'm cracking up ...and good to see you again and man what an amp lol crazy I wonder what the damping factor is??? God bless ya keep up the great work
Wow! All I can say is wow. But like some other comments, you're gonna need 10+ batteries, and 2 freaking alternators at least just to make that amp somewhat happy lol.
@@smalltimer4370 Back in day..Cheater amp is amp that was used in SPL-competitions. Good example is Rockford Fosgate's Punch 45. Rated way below what it actually does, i think it was rated for 35Wx2 @ 2Ω but it actually 90Wx2 @ 2Ω. I think they did not have low-impedance protection, so lower impedance meant more heat and more power. Early SPL competitions were arranged by output ratings like 25W or 50W being the most popular ones. I found birthsheet of Punch 150 amp 67.photobucket.com/albums/h311/fastfreddy7/001.jpg and see how it's rated so low
Glad to have you back RB! Great numbers but I’ll stick with the Wolfram. Korean board with dual amp inputs and I don’t have to worry about charging my fire extinguishers 🧯
Imagine if they had put some 4/0 power and grounds in that realestate, and 1/0 for speakers. PS I still want to know the song you use when you're doing the dyno part.
How about putting one of the new power acoustik vertigo amps on the dyno? Like the V110000 or 8000. I know it's still PA but they're great looking amps and if they did decent power and efficiency they would be worth the money.
You need to upgrade ur cars electrical system. I suggest getting a high output alternator and upgrading ur battery to an aftermarket high watt battery. I did my alternator from stock 60amp to high output 200amp, and replaced stock battery with a 2400w, 1600cca battery, as well as replaced wiring between the two to 1/0g wire. I also played it safe as a back up and installed a 50 farad capacitor. The reason ur lights dim and ur car stalls is ur taxing ur cars electrical system. It doesn't have enough to power ur system and still power ur spark plugs and lights. Hope this helps.
Been a while, welcome back
Powerus stock its about to go up.
Glad you’re back! It’s been a while
Powerus FTW I've been telling guy's about this amp for almost 3 years now BEST BRAZILIAN AMP HANDS DOWN I'VE OWN BANDA,SOUNDIGITAL ,TARAMPS NO COMPARISON my 10k clamped over 15k 😁😁👍👍👍👍
who sell Powerus amps ? Do they have a website ?
...I think the md12000.1 amplifier ( the 1 ohm version) is one of the best amplifiers ever made. I played with the powerus, and banda, and they're all great, but that taramps md12000.1 at 1 ohm just seem to be relentless on a pair of sundown zv5 subs.
banda is shitty amp? they look solid, never tested them.
Not for comp, but for daily high power spl, they are $1000 for 15k amp?
That’s interesting because I’ve been using my Stetsom for six years without issues and I actually own two.
I own the Venom 800.4 and the 3KEq.
Stetsom amps are good alot of people talk trash about them. I sell and install them once your electrical is good and clean rca signal your fine. I notice lots if guys try to run them for bass and to me they are not intended for that but mids and highs stetsom is great!
@ *Luke_784 Low Frequency*
Thanks for the input, interestingly enough I was using my Stetsom venom 800.4 which is not specifically an amplifier for Bass but I was using it with my Sundown 15” subwoofer been playing down to 10 Hz at full tilt many times. And have not caused me any issues whatsoever. I was skeptical on doing that but it withstood the test of time. I recently bought a Taramps Smart3 so now I’m using the Venom 800.4 for the midbass and vocals.
So $1000 for the amp and another $3000 for the high output alternators and batteries needed to run it. Time to start playing the lotto again.
Glad you're back.
Add 4 16 volt batteries and when you turn it up they drop to about 13 volts you still need a high volt alternator though, glad he’s back too
I had 13 14v batteries charged to 15.8v and 3 100amps PSUs linked and this amp STILL dropped me down to 12.79v 🤯 that's dead empty on these batts..
@@bigblank69 Dam!
Budget Gem or Budget Bust I think the super caps would only help the dynamic power run anyway
Richard R Does anybody make a thousand amp alternator? You’ll need it.
One hell of a power output period, Blew me away, great job
Full bridge amps flexing their advantage, glad to see the movement and advancement in them in the US. Hoping and waiting to see you test out Wolfram's O series amps. Glad to see you back as well, its been a while!
Powerus has been solid best amp coming out of Brazil. Hoping for the oxygen series to be as good
I think Banda
Welcome back !
Keep the videos coming
Hell yeah bro. Bout time for some new videos. Thanks for ur hard work bro.
Where you been? I got hooked on your videos about 3 months ago and binge watched almost your videos. Even you bench pressing. Welcome back you make some good content.
Thats a beast! 💪💪💪💪
Powerus is a legit full range Brazilian made amp. That limiter is technology i first seen on the kicker warehorse. A lot of companies now make full range amplifiers. So for my dollars Korean always on my lows (80hrz ! No no no 👎) with the full range to match. Great video!
I dont understad why the people always complains about the filter on these amps, they are full range but now days every almost head units have LOWpass filters, so you can run your FR amp and cut the freq by the Headunit... and is if not enough, you can run a crossover or DSP, so.. whats the big deal?
@@mauromuller6649 for my setup Korean on the subs! Nowadays guys are more and more falling back to Korean boards because the Brazilian boards just can't produce the lows. You mentioned a head unit to make up for the amp's inability to produce 🤔. That's funny!
@@Mr.NpK143 that's absolutely not true, and just typical FB talk. Full range, full bridge amplifiers, play low end frequencies just as well, as half bridge. Just ask, "Mr 15hz" lol... and he runs Taramps.
@@Chuck_Sanders prove it wrong! Chris @ CrazyHobbies just got rid of to Sound Digital 12ks. I is actually up for a raffle on his RUclips channel. Go ahead and check him out. He'll vouch he clamped 7k out of each 12k. Was he playing the lows? Hell yeah, but what happened to the other 5k? Needless to say he switched out to 4 oth the jp63s and has since upgraded to 4 of the jp83s for his new build. He like myself Korean is just the way on the lows! And dig this! I wont even chsrge you 👌
@@Mr.NpK143 you are the one bitching, about full range amplifiers. They play low end frequency just fine, and just the same. Your just another FB groupie, using the same old, passed around garbage info. You prove me wrong? I won't charge you. You make the argument, back it up? Whatever frequency is being fed, into the amplifier, it'll play. FULL RANGE plays all frequencies. That 80hz crossover, doesn't mean that's where it starts... haha. Damn
I can not wait for the new Synergy Full bridge! Awesome to see you back!
with that crossover i bet this would be great on 2000 pairs of proaudio mids
Perfect for listening to the Young Turks on. Or even better, good mythical morning.
@@Hammerback0 Young Turds...
It's highly impractical that most people would have enough alternator to support this at 14.4V but it should be quite doable with a decent Lithium as those will hold ~13V for extended periods of time.
We installed a Powerus 10k with Four 80Ah 3000 cca lithium batteries and factory alternator, 0 problems and 153+ dbs on music all day
@@danielyepez7196✅😎👌what brand lithium you used and by now what would you use instead?
WOW your back!!! Good to see ya.
This is a amp that I will get in a heartbeat. Very nice results 👍👍👍
You're back!
Thanks for another video. Hope all is well.
I love love ❤ it. It got me turned on to see the thing perform and than see how it looked like inside. The amp she's alive.
Very Nice!! I would have been running them but the way my account was set up when I was building... Keep up the goods glad to see you back in action.
These comments crack me up. So many rude people not understanding ohm's law, I'm worried for people buying amps like this, let alone hooking up their own electrical.
Thanks for the dyno, that was enlightening and very informative. I have to Orion hcca 3ks clamping just under 15k @15v, 1ohm each amp, on 160ah LTO, and I have 4 runs of 2/0. Beast amps for the price. I'm doing a new build that a lot bigger and was thinking about adding 2 more of my current amps or getting some of these powerus amps. They are stout that's for sure! I haven't had good experiences with any full bridges I've had. This looks promising tho.
I had just said haven't seen a video from you in a while. Glad to see your back and well. And back to preview a monster 👹
Wow when the amperage meter broke 999.OL holy crap that amplifier is a beast.
I've been wondering if you were alright glad to see you back.
Is this an amp, or a welder?!? 1,000+ amps! Wow!
Takes power to make power.... not going to find a amp capable of 10,000w not drawing 1000 amps
Welding is mostly done with DC not AC like the audio output... pedantic I know but worth pointing out. Also why an AMP can kill you with a mere 80 volts... AC passes through the body easily DC does not.
What the h*ll is this? I can't believe what I am seeing. A new video? You just made my night.
Glad to see more videos, and what one it is. That amp got the juice. WOW! Pricey though, but daaaang.
Finally your back bubba! Glad you're back I was starting to wonder. Just made my day 👍
13:24 as the tone "beats" the amp Dyno is dimming like the headlights of a car that would run this jewel!
Yep.. and I'm running 14... yes 14 batteries to this amp in the video.. plus 2 100 amp power supplies
Very nice Amplifier, I look forward to Repair one in the future. Thanks for sharing.
Good to have you back
Damn buddy. Long time no see. This thing is a beast. Jesus. And it looks mean too
Indeed it is
Welcome back. What a great amp👍👍
10k watts @ 12.7v is impressive! Again, the Brazilians have no idea how to size their power inputs, but I guess you could get your own quad 1/0 input terminals. This should really have three 1/0 inputs for 10k watts. I would still rather have the Wolfram half bridge Korean, but this Powerus amp surprised me for sure. Good video Ryan. Glad to see you making content here and there.
So you'd rather have a newer full bridge thats cheap as fuck to build over this? Weird.
They dont need quad inputs, they know exactly what they're doing. A good full bridge amp is more efficient than a half bridge of the same size, thats why they dont need triple inputs on an 8k amp.
I built 10kw pwm amps when i was 21 and Just graduated from university in Holland which is pretty much mit ober there. My thesis was about amplification under certain circumstances.. Goals where over 90% eff and minimal use capacitance and transistors (mos-fets). Worked out Just fine with 1989 fets. So Why wouldn't it work now with over three decades of developement in Electronic......
Btw we didnt use filtering so we had some issues with interference with radio frequencies. 🤣😂
Beast of a Brazilian....jeez!
I just got blown away!!
Holly shit! Your back. You have not done a video since I asked the last time.
Figured you just stopped. Good to see you back.
Awesome come back video!!! Hopefully coming back video???🙏
Well. Solid copper seems to be in fashion. What a great time to learn how to weld.
Ahh, the typical full bridge comment. Knew someone would say it.
Woahh hes back!! We need you!
Nice seeing you again buddy 👍. Very impressive results on this amp.
Missed your vids and you show back up with a monsta
Not familiar with that brand. But I took a chance on Stetsom with a 6k first now an 8k and I rock custom made subs with 4 inch coils with the exception of my new 18 inch kicker solo X motors on 15 inch frames. So I beat the crap out of my amps playing the lows to Extended low bass tracks and 18-28 hz test tones. I have the Alt and batt Power my stuffs stays lukewarm to warm. Only thing that heats up is my headunit :) my sub builder warned me about Brazilian audio now including me a lot of his customers are rocking Brazilian amps and now he is a believer though he still says Wolfram is worth the money if you got it. Ya was wondering what happened to ya!? Keep it going man!!
@ 12:43 freeze frame..this amp pulled over 952amps of current at 12.79v...wow
That's what 10k amps pull, takes current to make that high of watts
this thing is a freaking monster...
I love my Powerus 8k 💪🏽. Super legit
How does it sound ?
HOLY SHIT MY MAN! WHAT AN AMP! MISSED YA
Good to see you again Ryan!
BassGod on RUclips. He does musical 164 with powerus and Fi waiting for his new build going to be nasty. Hit him up for powerus
I'm sure that's who sent this to him. That dude is the only US distributor I've ever heard of
No inappropriate touching while I'm talking,sounds like bill😂😂😂😂😂jk ryan I'm glad you're back!!!!!
I said holy shit too, glad your uploading again
Heyyyyyyy. I was just wondering if bgobb was returning. Nice to see you back. 👍
My man! We all missed ya.
A person has to have a massive power bank to run this min of 70% good luck for those bassheads to run this amp
If you have the right kind of lithium cells, or a lot of good AGM batteries, this isn't too hard to run. Less than $500 worth of A123 cells from battery hookup would do 1000 amps continuous no problem, or a big bank of headway 38120's. A few big Northstar AGM batteries would also do the trick. Lots of people have the 12k version of the Taramps MD series, and the Wolfram 7.5k that does well over 9k watts, amongst others like Sundown's NS1 or NS2 or the Salt 12k's. You might need 2 or 3 big alternators, but I think the people who would buy this amp know they need a ton of juice to run it. It would be a fun science experiment to mess with this kind of stuff if you have the extra money to play with. Im not personally in that boat, but I still plan on building a decent lithium battery for my little 3k amplifier. I can do $300- $400 on that to play with lol.
Good grief! What a beast!
Its a real shame that even a year after this video went up that these are pretty impossible for me to find.
Wooh wooh The Queen of the Beasts 👍
Whole lot of power 🔥💪✅ BassGod ( RUclips channel ) runs these amps and is also a dealer...
Can you make an Amp Dyno video w/ different gain overlap settings and show wattage output difference? Basically do 3 certified dyno runs with 0db overlap , 5db overlap & 10db overlap on the same amp at the same 4, 2, & 1 ohm!
Pretty sure that's who sent me this
Damn now thats some nice power
Yeeeaaaahhhhh welcome back .... I thought you was gone
Been waiting on this one!!!
Powerus are built well man they out out I've got few of there amps!!
There is an amp that I would like to see on the dyno in a video that is made by someone other than the company that makes the amp. The skar rp1500. I absolutely love your channel and I would love it even more if you would make a vid on the rp1500
About damn time 🍻
Limiter is for current draw so doesn't draw too much on electrical systems.
Great vid dude I'm cracking up ...and good to see you again and man what an amp lol crazy I wonder what the damping factor is??? God bless ya keep up the great work
Holy crap new video my day is made
Been missing you my man !!!!!!
Glad to see a video !!!!
I love looking at amp guts
Massive powerhouse, but you will def need a serious alternator and battery/Super cap setup to run it.
Good to see you
Welcome back bro
cracked me up big time when you said "Holy Shit"🤣🤣🤣 awesome video👍
HO LI 💩
🤣🤣🤣
"Sick" and wicked Beast!!!
That amp is crazy
Nice looking guts. Good video as allways.
nice amp... I am thinking triple 0 gauge inputs...since the amp gauge limited out over 1000 amp draw. You have a great channel 👍 😀 👏 😊
Wow! All I can say is wow. But like some other comments, you're gonna need 10+ batteries, and 2 freaking alternators at least just to make that amp somewhat happy lol.
Just lithium man , agms are trash anyway
Any big amp you will need good electrical, takes power to make power
Big cmax is all ya need with a alt
Shut your mouth it doesn't matter
sucks they discontinued the c2400. i would've bought a second one
Shame they don’t have a bass remote .Apart from that it looks and works very well especially for the money 👍
CAN YOU PLEASE AMP DYNO PA AUDIO EXUIPMENT. (QSC, JBL, EV) The DJ community would love see the real numbers these speakers and subs put out.
Finally hes back 😎
Great review! My poor 95 amp alternator can't handle my two pioneers(9701)(8604) in my Acura rsx. Could only imagine what this would do.
Lol this amp is freaking new school cheater amp! Those numbers it's putting out is crazy!
It’s not a cheater amp it’s rated at 40hz and still along the lines of ohms law
Definitely not a cheater amp lol
@@atate23
What is a cheater amp anyways?
I always thought it meant a conservative rating
@@smalltimer4370 Back in day..Cheater amp is amp that was used in SPL-competitions. Good example is Rockford Fosgate's Punch 45. Rated way below what it actually does, i think it was rated for 35Wx2 @ 2Ω but it actually 90Wx2 @ 2Ω. I think they did not have low-impedance protection, so lower impedance meant more heat and more power. Early SPL competitions were arranged by output ratings like 25W or 50W being the most popular ones. I found birthsheet of Punch 150 amp 67.photobucket.com/albums/h311/fastfreddy7/001.jpg and see how it's rated so low
@@StaticVapour590 i had a punch 45, it was ok! It burnt out on me
Holy 💩 that’s a lot of power ⚡️!!!
That is a freaking monster
Glad to have you back RB! Great numbers but I’ll stick with the Wolfram. Korean board with dual amp inputs and I don’t have to worry about charging my fire extinguishers 🧯
Fuxking nice!!! Quality amp right there
Powerus, skar,B2, taramps etc we know these are great for bass has anyone tested them for sound quality?
Imagine if they had put some 4/0 power and grounds in that realestate, and 1/0 for speakers.
PS I still want to know the song you use when you're doing the dyno part.
That was fucking nuts... Over 1k amps draw at 1 ohm.
Holy
Crap
Ola...
Wish there was someone in UK with an amp dyno
POWERUS FTW!!!!!👑👑👑
How about putting one of the new power acoustik vertigo amps on the dyno? Like the V110000 or 8000. I know it's still PA but they're great looking amps and if they did decent power and efficiency they would be worth the money.
Big D did some...
It's been awhile man!!!
Well got damn!!
Take car to a mechanic an say there's something wrong with my car Everytime I turn on my stereo lights dim and it stalls.
You need to upgrade ur cars electrical system. I suggest getting a high output alternator and upgrading ur battery to an aftermarket high watt battery. I did my alternator from stock 60amp to high output 200amp, and replaced stock battery with a 2400w, 1600cca battery, as well as replaced wiring between the two to 1/0g wire. I also played it safe as a back up and installed a 50 farad capacitor. The reason ur lights dim and ur car stalls is ur taxing ur cars electrical system. It doesn't have enough to power ur system and still power ur spark plugs and lights. Hope this helps.
@@DisturbedXDM He ment it as a joke....
@@BobBasshead lmao I totally didn't read it that way until now that u mention it. 🤣😂
Lights dim? You'd be lucky if the charging system didn't violently erupt in flames.
can we PLEASE have some different intro music? I watch your vids late at night after work and the intro wakes me up lol, but I loved the video