I would definitely try the SpeedyBee Bee35. It’s tough and sturdy, but will push over the 250grams weight. Can cary a full size GoPro with a 1300mah battery for about 6-8 mins depending on flying too. Also get on the ELRS bandwagon! It’s fun!
Ill look into that one! I have the cinelog 35 as well. Almost all my flights require flying over people so i gotta stick under that 249 grams. But always looking to get new drones. I was on dji and crossfire so i really dont want to switch again 🤣
@@Anarkysniper yes! I’m always in acro! Just comes from lots of practice and the simulator and pushing myself to do harder things! You might crash a few times but it’ll make ya better
I havent flown it yet so I can not say but I would imagine theres gotta be some upgrades with it! I fly with 2 fingers. just what i started with so I havent switched yet.
Any idea if it's possible to get the the naked o3 in there while keeping it under the 250g weight limit with this frame? I am using the Foxeer Foxwhoop 25 because it's very sturdy. It's a great one if you crash a lot because it is dang near "unbreakable" as they advertise, but now that that's not happening anymore I'd like to get something lighter weight. By the way, what is the tempered glass product you bought?
@@nadabird5349 I got the tempered glass on Amazon! It’s linked in my bio for ya in my Amazon store front! Super cheap and worth the try. You can always do a naked DJI o3 air unit. It saves like 20-30 grams. They have a lite and ultra light version.
Very good video! My cinelog 25 just came in but Its too fast and I wish to tune it in betaflight. What rates and settings are best to fly this thing indoors? Please let me know:)
What remote ID module have you found fits best and how do you mount it to this quad? Also, I've been flying the cinelog25 for years and it's pretty hard to keep it sub250 when using a Flywoo Naked GoPro. Gotta use the NamlessRC naked GoPro.
I got the drone tag bs! It’s only 1 gram and super tiny. Just gotta solder it on! Yeah I was looking at nameless because i think it’s like 10 grams less or something?
@@tgn_productions yup I’m rocking both. Only issue is that there is no easy way to fit the dronetagbs and it barely works haha. I made a 3D print mount for it and its battery so I can swap it between drones and mount it to the battery strap. But then I also need a light when flying at night which is another added weight and a pain in the ass
@@LZRFPV Drone tag BS should be soldered and powered by your flight controller its super tiny and should fit? I even got in fly flylens 85. I dont think theres a smaller option out there! I have the lumecube light which is pretty small and lightweight. Have you get the nameless RC case yet? been thinking of getting that with the new gopro 13 as i think its lighter weight
@@tgn_productions I have 5 sub250 drones. I am not buying 5 RID modules. I use one with the independent battery so if I need to swap to a back up drone I can just throw it on really fast. The Lume cube light is pretty dang big. Not even sure where it would mount on a cinelog though. I have 5 cinelog25 builds. And yes I have been using the Namless RC Naked GoPro case since the Hero 9. Not sure if the Hero 13 will fit in the same case/BEC yet, but someone will tear it down soon I am sure.
@@LZRFPV fair enough I get that. I like the size and weight of it and one less thing for me to transfer between devices. The beauty of this hobby is there are so many differenent ways to do it!
Tnx for info! Just a question: the actual footage you make for costumer is from go pro? And also what do you think about filming with a analog quad with a go pro ofc?
Yes. I always use the gopro. I think it looks better than the o3 right now and the stabilization is awesome. you can definately fly analog. I have tons of buddies who do. All that matters is the finished product you send. Only you see the analog when you fly in the goggles.
My setup is very similar but my biggest issue is wind. If there are 5+ mph winds, I basically can't fly this smaller quad outside. For this reason I have been using the heavier Cinelog35 for outdoor shoots unless the weather is perfect. How do you combat this?
Well you are already solving it well, but i recommend that in populated areas, you usea a 3 inch instead of a 3.5 (for outdoors), and for tight indoors use a 2 inch
@@tgn_productions Cool! With the battery too? Which battery would qualify? I've got the cinebot30 with naked geprc 11 but want something that is better indoors and over people under 250g. Although for commercial use, the remote ID requirements make it REALLY hard to accomplish. How do you do it?
![[#2024MAMA] ROSÉ (로제), Bruno Mars - APT. | Mnet 241122 방송](http://i.ytimg.com/vi/dgGqD28J6aQ/mqdefault.jpg)
Comment here if you fly drones and lets support each other by subscribing to one another. Lets build a community!
Great video from a new creator. Repping Idaho! One of the best places to fly.
Thank you! Just having some fun with the thins I love and hopefully this is informative for someone!
Nice super helpful
@@tndrheartmedia glad I can help!
I would definitely try the SpeedyBee Bee35. It’s tough and sturdy, but will push over the 250grams weight. Can cary a full size GoPro with a 1300mah battery for about 6-8 mins depending on flying too.
Also get on the ELRS bandwagon! It’s fun!
Ill look into that one! I have the cinelog 35 as well. Almost all my flights require flying over people so i gotta stick under that 249 grams. But always looking to get new drones. I was on dji and crossfire so i really dont want to switch again 🤣
@@tgn_productions elrs is good but crossfire is still better
Liked and subbed
Thank you!!!
Great info! Thanx for sharing!
I got you
For indoor videos are you flying in manual? Because all of your shorts are incredible smooth
@@Anarkysniper yes! I’m always in acro! Just comes from lots of practice and the simulator and pushing myself to do harder things! You might crash a few times but it’ll make ya better
Great video! Wat do you think about the cinelog 25 v2? Is v2 better than the v1? & for flight sticks do u fly 2 fingers sticks or the thumbnail stick?
I havent flown it yet so I can not say but I would imagine theres gotta be some upgrades with it! I fly with 2 fingers. just what i started with so I havent switched yet.
Any idea if it's possible to get the the naked o3 in there while keeping it under the 250g weight limit with this frame? I am using the Foxeer Foxwhoop 25 because it's very sturdy. It's a great one if you crash a lot because it is dang near "unbreakable" as they advertise, but now that that's not happening anymore I'd like to get something lighter weight. By the way, what is the tempered glass product you bought?
@@nadabird5349 I got the tempered glass on Amazon! It’s linked in my bio for ya in my Amazon store front! Super cheap and worth the try. You can always do a naked DJI o3 air unit. It saves like 20-30 grams. They have a lite and ultra light version.
Very good video! My cinelog 25 just came in but Its too fast and I wish to tune it in betaflight. What rates and settings are best to fly this thing indoors? Please let me know:)
Get the throttle curve going or even lower the output power!
just posted a video about my rates!
What remote ID module have you found fits best and how do you mount it to this quad? Also, I've been flying the cinelog25 for years and it's pretty hard to keep it sub250 when using a Flywoo Naked GoPro. Gotta use the NamlessRC naked GoPro.
I got the drone tag bs! It’s only 1 gram and super tiny. Just gotta solder it on!
Yeah I was looking at nameless because i think it’s like 10 grams less or something?
@@tgn_productions yup I’m rocking both. Only issue is that there is no easy way to fit the dronetagbs and it barely works haha. I made a 3D print mount for it and its battery so I can swap it between drones and mount it to the battery strap. But then I also need a light when flying at night which is another added weight and a pain in the ass
@@LZRFPV Drone tag BS should be soldered and powered by your flight controller its super tiny and should fit? I even got in fly flylens 85. I dont think theres a smaller option out there! I have the lumecube light which is pretty small and lightweight. Have you get the nameless RC case yet? been thinking of getting that with the new gopro 13 as i think its lighter weight
@@tgn_productions I have 5 sub250 drones. I am not buying 5 RID modules. I use one with the independent battery so if I need to swap to a back up drone I can just throw it on really fast. The Lume cube light is pretty dang big. Not even sure where it would mount on a cinelog though. I have 5 cinelog25 builds. And yes I have been using the Namless RC Naked GoPro case since the Hero 9. Not sure if the Hero 13 will fit in the same case/BEC yet, but someone will tear it down soon I am sure.
@@LZRFPV fair enough I get that. I like the size and weight of it and one less thing for me to transfer between devices. The beauty of this hobby is there are so many differenent ways to do it!
Tnx for info! Just a question: the actual footage you make for costumer is from go pro? And also what do you think about filming with a analog quad with a go pro ofc?
Yes. I always use the gopro. I think it looks better than the o3 right now and the stabilization is awesome. you can definately fly analog. I have tons of buddies who do. All that matters is the finished product you send. Only you see the analog when you fly in the goggles.
@@tgn_productions good to hear this specially from you, this moment you push me to do that and buy my first cinewhoop, thanks :)
@@kresimirbrlas6768 which drone are you thinking of getting?
@@tgn_productions cinelog25, cinelog 35 V2 or myb Cinebot 30, tomorrow il decide
do you still use the sub 250 on windy days?
not when im out side but if it involes people and flying over them then yes!
What are the best rates for indoors? This seems fun!
There’s no best rates!
just posted my rates on my page
My setup is very similar but my biggest issue is wind. If there are 5+ mph winds, I basically can't fly this smaller quad outside. For this reason I have been using the heavier Cinelog35 for outdoor shoots unless the weather is perfect. How do you combat this?
Well you are already solving it well, but i recommend that in populated areas, you usea a 3 inch instead of a 3.5 (for outdoors), and for tight indoors use a 2 inch
In the same boat. But I really use this drone for indoor and flights over people. Otherwise I use a bigger like the 35!
So the 25 is under 250 g with the gopro installed on it?
@@stevecorcoran9869 naked GoPro but yes!
@@tgn_productions Cool! With the battery too? Which battery would qualify? I've got the cinebot30 with naked geprc 11 but want something that is better indoors and over people under 250g. Although for commercial use, the remote ID requirements make it REALLY hard to accomplish. How do you do it?
4s?
It is!
Hi, can i order one from you
i have a link in my bio and below the video to buy them. Check the amazon link below