2015-2020 F150 Barricade Extreme HD Rear Bumper with LED Fog Lights; Factory Hitch Review & Install
HTML-код
- Опубликовано: 8 сен 2024
- If your 2015-2020 Ford F-150 pulls double duty on the street and out on the trails, you may want to replace the inferior factory rear bumper with one that can handle the extra abuse. This Barricade Off-Road Extreme HD Rear Bumper will provide excellent protection from all kinds of off-road hazards while giving your F-150 rugged off-road styling. Featuring integrated high-powered LED lighting, this heavy duty Barricade Bumper is perfect for those who don't shy away from adventure.
This Rear Bumper includes (2) 3-inch square LED Fog Lights. They're equipped with 5 Watt CREE LEDs and are designed to provide intense 6000 K light. Each light is rated IP67 providing reliable waterproof performance, thanks to a tough aluminum housing, sealed with a polycarbonate lens.
Barricade Off-Road manufactures its Rear Bumpers to precise specifications from 3mm thick steel plate for superior strength and rigidity. Barricade then completes its Bumpers in a 2-stage finish using epoxy pre-coating and high-grade, textured black powder coating for long-lasting durability. amtrucks.at/3a...
Shop this Barricade Extreme HD Bumper: amtrucks.at/3a...
Subscribe for Daily Ford Truck Videos: bit.ly/2pReEeg
Item T542752
----------------------------------------------------------------
🎞Subscribe for Daily Ford Truck Videos: bit.ly/2pReEeg
Stay in the loop for other truck content:
Instagram: bit.ly/2pReXWs
Facebook: bit.ly/2pBz6AC
AmericanTrucks.com is your home for everything Ford F150! We offer the top mods, price-matching, and have a team of the best Ford truck experts around.
💥 muscle.am/YTSho... 💥
Shop this Barricade Extreme HD Bumper: amtrucks.at/3aYcan3
Subscribe for Daily Ford Truck Videos: bit.ly/2pReEeg
Didn’t go over the sensors because they’re ridiculous to get in.
I put one on last week. Easy install, the hardest was running the lighting, which was pretty easy. 2 beer job. Looks great, but I am watching the powder coat close. Maybe I will add a finish.
Glad to hear it was an easy install! Thanks for watching! -Zach
How did it the powder coat hold up?
Nice.. I’d like to see how the powder coat holds up over time.Besides that it looks great.
Rusty after six months
AT - "Come out to around 625.00, which is middle of the road price wise."
Me - "Yeah, seems reasonable..." as I open my empty wallet
It would have been nice had you shown the complete placement of the wiring from the front to rear of the truck.
Great video. At 13:22 seconds you mentioned that a crooked hitch can be adjusted. Is there an advantage to leaving it loose and tightening it after you install the bumper?
How do you do the sensors?
After installing this bumper my Trailer plug fell out, I did not replace the tape that was around it, I recommend doing so.
Take a pick or flathead screwdriver and get on the inside of the platstic tabs and lightly pull the tabs all the way through the bumper. You should hear a light "snap" when it snaps in place.
I so want one on mine
Rusty after six months
I would have tapped the pod lights into the trailer wiring. Turn on when you shift into reverse. I don't like the look of the peel and stick switch.
You dont want to tap into the trailer hitch wiring. Everytime you turn the truck on it will think you have a trailer attached and you will lose your back up sensors and get the annoying message that pops up on the dash. I think the best way is to tap into one of the reverse lights from one of the tailights. I did this when I added a tail gate 3rd brake light and it worked great.
Well. how close my the kit I purchased to what is shown
5:30 Mark, do not do it as she does, start at the ends and it will come up easier and then you can see the center clips
9:00 My Lights were a bit different, but nothing I could not handle
The kit does NOT come with a Pancake Washed for the large slots, GET one for each side, the Lock Washer will not cover the slot and digs in
Wiring is easy and NOT
She points to the fire wall and claims you can pull back some rubber and push the switch line trough into the cab
NOT
As I could find no such rubber access on my 2017 I called American Trucks
He told me to take it to a Shop
OUCH
So, I have everything but the Wiring in and it looks great
now the effort to get it wired
This literally took 5 hours.
my bumper has a bunch more wires than yours does.
I’m in the middle of installing mine. The sensor install NEEDS better instruction. Also you can tell everything is cheap Chinese garbage. Including the installation instructions! I’m a ball hair away from returning it.
I don't know if it's a good or bad video because of rats 🤔 🤷
Bad service all the time