Can you do an video on steering rack bushings and seals? I learned the hard way after replacing everything else. The video would help save others $$$. Thank you for all you do!
It helps to measure the outer tie rod before removing to get the jam nut in roughly the same location, otherwise you might not be able to make it to the alignment shop
Great video as always. I had a 1990 Accord that one day I was parking and when I turned the wheels, I lost the control over the steering, and I couldn't turn one of the wheels. That was super dangerous, and am glad that happened when I was parallel parking, good thing it didn't happened in the highway. My mechanic fix it, but I can't recall what was it. What could it be? A tie rod? How can I never felt play in the steering? Thanks.
I got into an accident on the freeway where I slammed down on my breaks and collided with someone and now my steering wheel is extremely loose. Any ideas what it could be specifically? I’d appreciate the help!
Great tutorial that you kick out.Maybe give some advice on something?my 2005 envoy 5.3 gmc,while mobile my locks be jumping on/off as well on dash the park to drive indicators jumping back and forth. Would you please give advise on that,ty and keep up good work with your tutorial.
Would you recommend using a starter fertilizer separately after seeding or using a mixture of fertilizer Starter mixed with grass seeds that they sell in a bag.
My wheel bearings have no play and had the dealer replace both outer tie rods, both upper and lower ball joints and the drag line on my F250. But there is way too much play in the steering wheel. Help!
I have a problem with my 99 GMC Yukon My steering car is loose I replaced the entire suspension plus the rag joint and The steering wheel still has a lot of play what can I do?
Hi I've been watching your videos and a subscriber too. Just a question what will be the cause why I am hearing clunking or sounds like scretching noise everytime i step on the brakes slowly. But continously running i do not hear any noise. What will be the possible cause. Hoping to hear from you soon. Tnx
+mehdi remidi We would suggest taking your vehicle to a local mechanic to take a look at the issue. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
What about a steering wheel that just keeps spinning but doesnt turn the car left or right? Like it isnt catching or the steering collum came lose. What could it be?
Good night to you all am from Jamaica can you send me all the doors hang for my 2001 Honda Odyssey in side on out side text me and let me know if you can send it to me send me all so the price
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
it looks easy when you have the right tools.
Got to love the bloopers
Can you do an video on steering rack bushings and seals? I learned the hard way after replacing everything else. The video would help save others $$$. Thank you for all you do!
Trmksh sudah berbagi sir
If your wheel bearing is really bad you should just be able to pull the whole tire assembly off in one go
Favorite part is the blooper reel.
Thank you!! Now I jst need a lift 😅
It helps to measure the outer tie rod before removing to get the jam nut in roughly the same location, otherwise you might not be able to make it to the alignment shop
It’s just a quick video don’t overthink it
No measuring needed for the outer tie rod, Just count how many turns it takes before it comes off & use the same amount of turns to install.
I watch this channel everyday!!! Love it!!!
Thanks so much friend (: great help
thank you for sharing knowledge and sharing information on how to overcome a loose steering wheel..Succes friend
I drive a 96 Chevy hopefully this will help the loose ass steering 😂
Great video as always. I had a 1990 Accord that one day I was parking and when I turned the wheels, I lost the control over the steering, and I couldn't turn one of the wheels. That was super dangerous, and am glad that happened when I was parallel parking, good thing it didn't happened in the highway. My mechanic fix it, but I can't recall what was it. What could it be? A tie rod? How can I never felt play in the steering? Thanks.
Super easy! If you have the correct tools, money know how and time.
So that little bearing that was push forward on the old part of the inner rod was a bad sign right ? It’s not suppose to have that type of room
best video, qusetions can the Rag joint or steering couplink can cause the type of play in the wheel?
I got into an accident on the freeway where I slammed down on my breaks and collided with someone and now my steering wheel is extremely loose. Any ideas what it could be specifically? I’d appreciate the help!
Good stuff 👍🏽
When replacing tie rods should you replace inner and outer if only one is bad?
Great tutorial that you kick out.Maybe give some advice on something?my 2005 envoy 5.3 gmc,while mobile my locks be jumping on/off as well on dash the park to drive indicators jumping back and forth. Would you please give advise on that,ty and keep up good work with your tutorial.
Great tutorial!
So I bought new wheel hub assembly and new cv axles. Still have this issue. Any other suggestions? Tie rods and sleeves are new as well.
Would you recommend using a starter fertilizer separately after seeding or using a mixture of fertilizer Starter mixed with grass seeds that they sell in a bag.
I would definitely not use any gasoline that has been sitting in a can for over a year, even you did use Stabil. You are just asking for trouble!
🤣😂🤣
Do you need to check front and back and both sides
May I know that if the steering rack is always tighten firmly n do not have any free movements at all???
Is there any other causes too a loose steering wheel besides outer tie rods and where bearings.
bad ball joints and maybe control arm bushings thats all.
Where is this shop located? I would love to bring my car to y'all! Xoxo 🙏🏾❤
Westford Massachusetts
I got that all fixed but I’m still having the that driving sensation. What’s the next thing it could be?
When I get on grooved roads like the highway my 1996 Hyundai accent well move around..
Nice
My wheel bearings have no play and had the dealer replace both outer tie rods, both upper and lower ball joints and the drag line on my F250. But there is way too much play in the steering wheel. Help!
I have a problem with my 99 GMC Yukon My steering car is loose I replaced the entire suspension plus the rag joint and The steering wheel still has a lot of play what can I do?
Hi I've been watching your videos and a subscriber too. Just a question what will be the cause why I am hearing clunking or sounds like scretching noise everytime i step on the brakes slowly. But continously running i do not hear any noise. What will be the possible cause. Hoping to hear from you soon. Tnx
is it normal for the steering wheel to feel a bit tighter ( not stiff ) near the middle ? and less tight near full lock?
+mehdi remidi We would suggest taking your vehicle to a local mechanic to take a look at the issue. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I've also found that the steering midshaft joint can wear and cause play in the wheel.
You're telling me a bad wheel bearing is going to cause loose steering?
Where are you located
+@starzlegendz3445 Our video studio is based out of Massachusetts. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
What about a steering wheel that just keeps spinning but doesnt turn the car left or right? Like it isnt catching or the steering collum came lose. What could it be?
Remember to dent back inwards the axe nut edge as an extra safety
@3:43 that’s what she said
👍
🤩🤩🤩
I don't have any of these tools...I have not much of anything at this time...I was homeless for 10 years and I'm still getting off my feet...
Yeah so no way it's the u-joint. Why do you assume it's those other parts that are the issue those are the most expensive.
None of this fixed my problem
Good night to you all am from Jamaica can you send me all the doors hang for my 2001 Honda Odyssey in side on out side text me and let me know if you can send it to me send me all so the price
If John malkovich were a mechanic...