Im really happy someone that doesn't work for a major company took the time to go into detail on how to transform a granite countertop. I was looking for something like such and I am happy you posted one. By the way your project came out nice. The 6 thumbs down are just haters. Can't please everybody. Thanks again. 😊
Your comment just made my day! Thank you so much for taking the time to write this kind & encouraging message. You're awesome. I did SO much research before diving into our project, and like you, wanted to see some "regular" folks trying it out. So I decided to document the process to hopefully help/inspire someone. Best of luck with your project(s)!
Not bad for a 1st timer! I do have a few suggestions for your viewers... Use Bondo to smooth out all even surfaces and to cover all seams. Unfortunately, you’re never going to be able to hide that seam in the granite unless you redo the whole project. Always do one surface together. Never do a single surface in sections. 3 ounces per square foot for your project Apply between 70° and 85° Make sure the epoxy is thoroughly mixed or it will never properly cure! Use an 1/8 in. square notch trowel to spread Remove all loose strands from the paint brush before using where they will end up in your project. Add mica powder to 90% isopropyl alcohol in a spray bottle for a really cool effects! Scrape the underside with a tongue depressor, (or any flat object) WHILE ITS CURING and you will not have to do all the sanding or scraping after it’s hardened. For fully detailed, step-by-step process to apply epoxy to any counter the two top dogs for epoxy counters are Stonecoat Countertops and Legari. both companies have their own RUclips channels and both go to great depths to teach you everything you need to know for a perfect counter. Stonecoat Countertops goes to the extent to teach you how to build a custom countertop!
Thank you Chris. I did the best I could considering my lack of experience, and hubby & I are pretty happy with the result! I appreciate your suggestions. Although I did try to "scrape" the underside of the counter to avoid ending up with hard drips (and extra work), but that didn't work so well for me. I wiped SEVERAL times on my first pour (bar top), until the epoxy was too "gooey" and it didn't work anymore, and still ended up with drips. And clearly, there's no need to promote Stonecoat or Legari as they are ALWAYS the first ones to come up in a search, as all the viewers know. They do great work and have wonderful videos, and I learned a ton from them. I did a lot more research and found that their videos were missing a few small pieces (for a beginner), which is why I decided to document my process; just in case it helps an inexperienced person like me gather up the courage to give it a try!
Good job for first time. Keep up the good work. I also like how you showed your very minor mistakes. I use this stuff so much and enjoy making new projects.
Great job! A couple of tips though...A 1/8" notched trowel wouldve helped you spread the epoxy so you'd get an even coat and if youd have come back with a paint stick while the epoxy was still tacky you couldve wiped off all thise drips before they hardened. It would have saved you a ton of work and given you a more finished edge
You are so kind, thank you! 🙏🏼💕 We remodeled the whole house by ourselves during the pandemic. Definitely a labor of love, and so fun to do it together. 😊
You are so kind! Thank you so much for taking the time to write this sweet comment. 🙏🏼💕 FYI: I was soooooo scared, and it took me weeks to get started even after I ordered all the materials. But it worked out! I say you can TOTALLY do it if you choose to! 💪🏼💪🏼💪🏼
@@MagdaMolina ok that’s it. I committed. I want a glittery kitchen and I ordered it. Thank you I needed your encouragement. Stay tuned. I will let you know how I do
Great Video, I finished a countertop following your instructions, great results only one thing: to avoid cut drips at the end " remove the drips as you go "
This makes me so happy; thank you so much for letting me know! As for the drips, I did try to wipe them off, several times in the first couple of hours (on my first pour), until the epoxy got too think & gooey to wipe it off without messing it up. But they still formed. So I didn't even try for the rest of the countertop. But a few people wrote some good drip-removal tips, so I will try them when I do our 2 bathrooms!
Many thanks for this very helpful video. I have been watching Leggari but it was great to see a non professional attempting a counter top. I have been wanting to do a fairly scratched glass dining table top and I now feel I can have a go at doing it. Cheers Marie ‘downunder’ 😀❤️😀
Thank you so much for your kind comment Marie! I know there are (many) much better videos out there, but I documented (and shared) my process for precisely that reason: to show that a regular, inexperienced person can actually do it. Best of luck with your table!
Outstanding step by step presentation. Very clear and easy to follow. Exceptionally well done. Thank you, very helpful tutorial. Among the best DIY instructionals that I’ve seen on RUclips.
Thank you so much for the kind words and feedback; your comment made my day! I documented and shared my process hoping to help someone (like me) who was nervous about trying this.
Very nice very nice. I'm glad you took the time to show each and every step and didn't talk so fast that we had to go back and Rewind. I was hoping for more color and marbling, but that's just my preference. I will do that in my house. Yours looks really really lovely. I'm glad you said it takes a week or two after before you can actually put things on it. That makes a difference but of a self-leveling part is key. I can't wait to get started
This is great! Thank you for documenting your process and posting this! It is a lot of work. I have ugly granite countertops too (I know...boo...hoo! Granite counters, right??) We were going to remodel our whole kitchen but because of job instability due to Covid, I've decided to diy it. I might even tackle the countertop! I like your calm and detailed explanation. Thank you for the inspiration!
Thank you SO much for taking the time to write those kind words! I really appreciate it. And best of luck if you decide to tackle your countertop! #youcandoit 💪🏼🙏🏼❤️
Omg SUCH an improvement. I have granite too and Ik it’s still a “nice natural stone” but I just hate it 😂!!! I love the clean marble look! You did such an amazing job!!
Thank you so much for your kind words! Natural stone or not, we just hated that 90s granite. My husband called it the “cat box”...! 😂 We’re super happy with the new countertops. ☺️
OMG!!! Magda! You are giving the guts to do my countertops!!. I've been watching videos (Stone Coat Countertops RUclips channel) and wondering if I can do it! I'm sort of handy woman, but this task looked intimidating over all. With your step by step video I think I can do it!!!
This makes me SO happy!!! And that's precisely why I decided to document my process, put together a video, and share it. I was super nervous and it took me days (after I had all the necessary materials) to gather up the courage to dive in, but I'm super happy I did. Just do a little practice (or 2, or 3) on a small surface to feel the epoxy and try out some colors/styles and you should feel better about it. You can totally do it!!!! Thank you so much for taking the time to give some feedback, and for your kind words!
i absolutely loved your thorough explanations, I also love the fact that you're not a pro that's skating through the topics. You make sure to explain as you go. I am also a first timer gal, trying to redo my countertops. I just painted them with Giani countertop paint and now I want to finish with Epoxy Resin. It is fascinating but very scary for a first timer like myself.. Let's just say, during this whole process, my husband has asked me a million times to not ruin the countertops so now, im out to prove myself haha
You are so kind; thank you for taking the time to write this great comment! I was a first-timer too when I documented this process, and terrified to mess up... it took me 2-3 weeks to get started even after I got all the supplies! So I TRULY understand your concerns. But we're super happy with how it came out. And the great thing about epoxy is that if you don't like the look, you can always pour over it and re-do it differently. Good luck with your project! YOU CAN DO IT!!!
@@MagdaMolina wow thank you for the reply!!!! I really appreciate it! Yeah, I am still making my way through the giani paint on all the granite countertops. It’s literally taking forever! That’s good to know with the epoxy because I thought it was a permanent “you’re screwed if you mess up” kind of thing! I bought some mica powder as advised and I’ll start to put some things together. Crossing my fingers!
@@MagdaMolina thank you!! Well so far, I made a bit of a mistake. I tried to chop in some color like you taught me but it ended up making it super thicken and uneven. I got the self leveling epoxy so, now I have to sand down the stuff and start again
That's a bummer. Not sure how that could've happened... My experience is VERY limited (just that one project), so I'm not really in a position to diagnose the issue, but from all the research I did before doing our countertops, I would say it was one of 2 things: Either you tried chopping in the colors a little too late in the process and the epoxy had already hardened too much. Or perhaps something was off with your mix (not quite equal parts, or not mixed thoroughly enough). Might be a good idea to read what some experts have to say about it, to make sure you don't have the same problem on your next pour. Good luck with it!
That makes me so happy! And that was my main reason for documenting and sharing my process. Thank you so much for taking the time to write this kind comment! 🙏🏼💕 And if you’re curious, I just posted a 1 year follow up video to show how the countertop held up. We’re very happy with it!
Magda - awesome video!! You are so incredibly creative and talented, I marvel at your creations. We send our loves and best wishes, can't wait to see the masterpiece in person. xxxooo S & C
Sheryl Carlucci thank you so much for your kind & supportive words sweet Sheryl! Please come out and visit soon! We miss you guys and would love to spend some time with you. 😘❤️💕
Excellent effort. Put tape under edge of countertop before pouring epoxy to eliminate all that sanding off of hard dripped epoxy. Also, prior to pouring epoxy, tape vertical edge of countertop to create a dam effect. then when finished pouring and adding stuff to the pour, remove the tape. Roughly 1 hr after pour.
This is SO HELPFUL!!! I am knocking around this idea and am happy to see that a “real person” can do this. I generally have no skill at this sort of thing but you make this look doable! I will share my results if I ever have the courage to do this. I do have a question: Did you leave your backsplash in the original granite? I would be covering laminate counter tops from the 1970s. And... your counters look amazing.
Thank you SO MUCH for your kind words! Means a lot. I was super nervous about doing this, and it took me a couple of weeks to gather up the courage to dive in, even after I had all the products. But super glad I did! Now I just pray that it holds up with time... but so far so good! (after 2-3 months) I ended up doing brushed aluminum peel & stick tile on the backsplash. I posted a link at the end of the video description where you can see before and after pics of it. Check it out! And best of luck with your project! #youcandoit
This is a great video, I am ordering the products from Amazon, I am covering a cabinet with a granite counter top, I saw your video so I know what to do or not to do, thank you so much for posting it. I am doing a very similar version of Black Galaxy granite, wish me luck!
Thank you so much for taking the time to write some kind words Patricia, I really appreciate it. And best of luck with your project! I'm sure it's gonna look amazing!
Great job!! You missed a great video where you tape all around your counter with masking tape or blue tape so the epoxy doesn't run off until you remove the tape. Then it will continue to level and run over the edge. Then take a paint stirrer or a gloved hand and wipe the underside and remove all drips. Way less work and no sanding or scraping.
You are so kind, thank you so much! It makes me super happy to read your comment and to know that my video made you feel like you could do it too! That was my hope when I decided to document my process and share it. Yes you CAN do it!!!
Nice job, sanding the drips with the Dremel is a good idea. Scraping the epoxy bucket is usually the result of soft spots, but it seems you got good results.
It looks great I also started on my granite counter top. I am going for marble, for Next time for the drips wipe them of with stick even with ur fingers while drying , it will save you the hustle.
Wow this looks amazing... I wish I had to confidence to do this myself, I’m scared tho. Does this chip, or damage if you put a boiling pot on the counter?
Thank you so much Gisselle! I was pretty scared too before I started, but it turned out pretty good. And I love the look. Although I can't answer from extensive experience yet (finished the countertop only about 2-3 weeks ago), epoxy is supposed to be very durable. Did a bunch of research before diving in. Epoxy is heat resistant, but not heatproof. You can set a hot dish on the surface without instantly ruining your countertop. Keep in mind that if you leave a heated baking dish or a hot coffee carafe on a layer of epoxy, it will eventually damage the surface. It's smart to use trivets for hot pots to protect epoxy counters or any type of kitchen countertop from heat damage.
Very nice, just a few tips, you can remove the drips an hour later just using your fingers with a glove if they are still able to do it like that, otherwise you can use a blade that can cut off all the drips that are still soft, in the event you find your self in the situation of having all the drips for days and really hard.. you can use an orbital sander with a 100 grit sand paper , before tape the area to protect the cabinet finish, but overall the job came up nice for first time.
Looks fantastic! ... Great job. You could've saved yourself a lot of work & mess by taping off your counters edge, just until it started to harden a bit to slow down the flow, during the self leveling process, removing the tape around the outer edge, then allowing the epoxy to ooze over the edge evenly & then taking a metal scraper along the bottom edge, as it begins to dry ( within 1-2 hours) ... this would have completely eliminated the step of having to sand off the drips entirely & thus avoiding the time, energy & mess of that step. Your project turned out beautiful & love the colors. Sincerely, Michelle🙂
Thank you so much Michelle! I appreciate your kind words and helpful tips. I did try to wipe the drips several times as the product was settling, but they just kept forming. Until the consistency was too thick & gooey to "wipe". A few other people recommended the tape trick, and I will definitely try it next time. I have LOTS of room to learn and grow! Thanks again and have a great day!
Thank you!! I’ve been trying to find a video and can only find faux granite. We have lovely granite counters but they’re too brown and we’re in the process of painting our cabinets white so I’d like to paint my counters as well now. (Probably black) Love the outcome, great job!
Any updates in use and durability? Issues with heat? Great job on the video. We just purchased another home and it has the darker, mottled, granite counters. We hate how it hides just about everything. Those gorgeous light counters you did would make it easy to spot a spill. Well done.
Thank you SO much for the kind words! 🙏🏼 We’re still super happy with our countertops a year later. And I’m actually planning to post a follow up video in the next few days as several people have been asking. Stay tuned...! 😀
I was JUST about to ask this exact question. Fortunately, I continued reading comments first . Certainly would love to know! I have e the same ugly countertops in a home I recently purchased
Great video!! Appreciate how you broke down steps and explained things. Teaching is great coming from someone inexperienced. Are you a teacher? 😊. Thank you!
You are so sweet! Thank you so much for the kind words. I’m not a teacher, but I do enjoy helping people understand things. 😊 I’m glad you enjoyed my little video and I hope it helps you with your project!
You did a great job! Thanks for this detailed video. Did you buy your epoxy materials online or at a local store? What tips do you recommend for choosing a color/mixture? Thanks for your help! - Kenya
Thank you so much for the kind words! I did this countertop right after the pandemic hit last year (April), so I couldn't go to a local store. Bought everything on Amazon and it was super easy! All the products I used are listed in the video description, with links (not sure if they're still available though). Based on my (very limited) experience, I would say that it's important to pick the right background color for the look you're trying to create. In my research I saw that you can also add the paint into the epoxy mix for an opaque look, but that's not what we wanted. Also, I had fun choosing mica pigments (powder); they come in so many different, beautiful colors! My best advice is to do some tests. Mix a super small batch, and play around with your colors. Test on a piece of wood, plastic, or stone (if you have one) and write down your "recipes" to be able to replicate. Repeat until you get a look you love! Hope this helps. Best of luck with your project!
I didn’t read all these comments but just wanted to mention a tip...you could have saved yourself A LOT of time and trouble by wiping those drips w a paint stick or anything similar as the epoxy is setting. Just check on it every now and then and scrape the drips off of the underside w the stick 😊👍🏻.
Barb Mahoney thank you for the tip! I actually did try to wipe off the drips. Several times. Until the product got to sticky and messed up the epoxy coat around them. And more drips still formed. 😕
Chris Serravalle of course! Here it is (comes in 2 different sizes, I believe): Crystal Clear Bar Table Top Epoxy Resin Coating for Wood Tabletop - 1 Gallon Kit www.amazon.com/dp/B01LYK2NAG/ref=cm_sw_r_cp_api_i_u7d0EbVH5AKXS
Thank you! I used 60 grit sandpaper (pretty gritty) and it seemed to to do the trick! The point (from the research I did beforehand) is to just "scratch" the granite a bit so the primer has something to adhere to. And if you're curious about what I did with the backsplash, I posted a link at the very bottom of the video description so people can see the finished product. Good luck with your project!
I really hope you see this comment and respond because I am struggling to find any videos on this! I am looking to redo my bathroom granite countertop. It is old and dark and does not match my kitchen. I only what a plain white countertop. Can I use the rust-oleum tub and tile kit or should I buy exactly what you have in this video? Thank you so much for this awesome video!
Hi Tabitha and thank you for your kind words! Let me start by saying that I'm no expert in the matter... but I did do a ton of research before doing this project, and I did another countertop a few months later. Also, I refinished an old bathtub with a (different) great product. So, the advice I would give you (with my limited experience) is to use an epoxy based product. I've seen the result of those rust-oleum bathroom kits: they look great for a minute, but the product starts to deteriorate very quickly with any kind of use. Within a couple of months the product starts to peel and get scratched. Epoxy based products are MUCH more durable. So you what I would do in your situation is either add white paint to regular "table-top" epoxy (like the one I used in this video), or use the same the kit I used for my bathtub refinish (it's already white). Epoxy is more expensive and more work, but well worth it in terms of durability in my opinion. Here's my tub video if you want some info: ruclips.net/video/-w786AFz8xE/видео.html Best of luck to you! You CAN do this!!!
@@aprilepp74 It’s been about 9 months since I completed the project, and it still looks great! We’re super happy with it. No noticeable change in color. Only "micro" superficial scratches from daily use (which will happen on any polished/glossy surface), but those are only visible in a very bright, very direct light. Otherwise not noticeable. Will post a follow up video at the 1 year mark.
Looks great but Omg you could have saved so much time and dust if you would have wiped off tje drips when they were still wet. They also peel right off if you use blue painters tape!
Julie Rathe thank you! Like I have replied to several other comments, I did try to wipe them off. But the drips kept forming. Perhaps I’ll try painter’s tape next time!
Hi there and thank you for the kind words! Yes, you are correct. The epoxy is clear, so if you don’t add any colors, flakes, powders to it, it will just show your background color (whatever that may be). Just be aware that it tends to yellow a little bit over time (especially in areas that stay covered - like, by a small appliance), and that’s much more visible with a light background. Best of luck with your project!
OMG I am considering doing this. I have stains all over mine that I can't get out. BUT I am petrified ! I love the color of yours etc. I would do the same thing pretty much.
Thank you so much! And just so you know… I was petrified too! Had done a ton of research, and purchased all the materials, but it took a couple of weeks to gather up the courage to dive in. And I’m really glad I did! We love our countertops and they’re holding up really well (been almost 1.5 year). Best of luck with your project; you can do it! 💪🏼
Steven Anto thank you so much for your kind words! 🙏🏼 The total cost was about $260-270 (epoxy alone was about $175 as our counter surface is extensive). Hope this helps!
I really want to change mine. Im just scare to do it lol. You could of cleaned up the drips off the bottom when it was still wet. Saves you the extra work
I was super scared too, but we hated the old 90s granite so much that I figured I didn't have much to lose! That's also why I documented my process, to hopefully give a few people the courage to try it. As far as the drips go, I DID wipe them off while the product was wet (several times), but they kept forming. Until the product was too thick & gooey to wipe off cleanly.
You should probably wear a respirator instead of just a mask. Lots of dust when sanding and you don't want to breathe it in. The respirators at the big box store start at under $40 and can be used over and over. I am learning this process too and I understand you can wipe off the drips about an hour after you finish your work and again every 30 minutes until the dropping stops.. Good luck with your projects !
@@freeangie11 yeah but to be fair she could have sold it for a decent amount of money Granit is still worth something and bought a basic wooden one so she may have had everything for free
Looks really pretty! Hey, so if I have my design already on with my paints, can I use the clear coat epoxy with one pour? Or, do I pour once and then lightly sand it and do my second, final pour? I guess I need to know if I can get away with one pour because my colors are done already?..?? Anyone? Thanks
I can understand doing this over laminate....but, granite?!?? Why????? I would love the granite in my own kitchen. It's a natural material that will never go out of style!
About to do this to my granite counters. They are like diarrhea colored and it makes me feel sad looking at them. I want something light and bright. Plus, the epoxy can be removed from the granite, so it’s not like it’s permanent or the future homeowners can’t revert back.
We couldn’t remove the sink without taking out the countertop, so that wasn’t an option... 😉 We did remove the faucet though. And it was actually easy to epoxy around the sink. I just put plastic in the sink to protect it; taped it really well around the edge (under the little overhang). Then I just let the epoxy spill over the edge on all sides while applying.
Great video! Just what I’ve been looking for. We hate our countertops. But couldn’t find a thorough video that broke everything down. What kind of sandpaper did you use?
This makes me so happy! ❤️ And that’s the reason why I documented my process; because I couldn’t find a fully broken down video either when I did my research. Used 60 grit sandpaper with our sander to open up the pores of the granite a little bit. Hope this helps! And good luck with your countertops! 🙏🏼💕
Agreed, a tape "dam" around the edges is best until it sets up enough that it doesn't just run off.That's how they do it on the Stone Coat Countertop channel, and it works so well!
Of course! It’s all about taping off and covering w/ plastic all the area you don’t want epoxy on. Our stovetop we were able to remove and cover that empty space with plastic. The sink couldn’t be taken out so I covered it with plastic, taping it under the edges. And then I just let the epoxy flow over the edges into the plastic. Hope this helps!
Hi Karen! No, unfortunately we couldn't. In order to work properly, epoxy has to be applied to a horizontal surface. What we could have done is cut some plywood to backsplash size, epoxy it, and then glue it to the existing granite. But it felt like it would be too thick, so we just tiled over it instead (metal peel & stick). Hope this helps!
Magda, I product epoxy counters for a living and you can apply epoxy vertically. I wish I would have caught this when you uploaded it and could have suggested the additive to thicken and cure the product for vertically. Way to tackle a tough project!!!
Thank you so much! The epoxy I used was already listed, and I just went ahead and added links to the other products I used for this project. Hope this helps!
Thank you for the kind words, and best of luck with your project! I don’t have information about tool rental, sorry. But I’m sure many hardware stores do rent them.
Thank you for the kind words, and best of luck with your project! I don’t have information about tool rental, sorry. But I’m sure many hardware stores do rent them.
So if you put tape on the bottom Edge before you pour actually two layers of tape on the bottom Edge before you pour once it's dried like the next day her that evening just pull the tape I got a nice clean Edge no drips bubbles
Thank you for your question. The product I used had no smell or fumes, which is why I picked it (and am not wearing a mask in the video). I know it’s not the case with all epoxy products though. I’m sure you can find that information about the brand you purchased. Good luck with your project!
It’s holding up really well and we’re very happy with it (and it’s been almost a year)! Some scratches, but that’s normal on any kitchen surface; especially because it’s so shiny. But you have to look for them; they’re really not visible. Best of luck with your project!
Thank you so much! 🙏🏼 The painters tape has to be removed before the epoxy is set/cured, otherwise it’ll stay stuck in it. Best to remove right after you’re done applying the epoxy, while product is still flexible.
Im Curious how you think it would look all white. In our home we had a friend who was a landlord and we ended up buying the house from her but when she did the granite she got the absolute cheapest and it is black and I’ve hated it from day 1 but we cannot afford a new one now but I love the all white quartz do you think that could be accomplished?
I know the feeling... The only thing we hated about this new house we bought were the countertops. And didn’t have the budget to replace them. So that’s why we explored the epoxy option. From the research I did, I’m pretty sure you can do any color(s) you want. And I know for sure it would cover the black. The only thing I would recommend researching before doing it, is the yellowing factor. We haven’t had that issue, but I came across some comments about it. And on an all white surface, it would be very visible. Best of luck!
@@Tinaillcutyou well, the epoxy I used is supposed to be resistant to yellowing (according to their website), and also, putting some color in it (which I did) makes it less likely to show if it does end up yellowing a bit over time. Ours still looks great after almost a year. With an all white surface, it would show right away, which is why I recommend doing some thorough research beforehand.
Thank you so much! I did a bunch of research about how much epoxy would be needed, and I ended up using about 1 quart per 10 square feet of countertop. And that was plenty. Hope this helps!
Also when did you add the flakes, into the mix before you used the paddle drill to mix? did you have an issue with the flakes sticking out of the epoxy? I think the flakes I got might be too big. Did you do any sanding between the first coat and the second? how much dry time?
Good morning Beverly! The mica flakes I used were fairly big, but really delicate and flat. I sprinkled them on the directly first coat right after applying it, while it was still very wet (didn't mix them in). I was able to "push" most of them in with my brush, but not all. The second coat covered them all completely. Best of luck with your project!
Thank you for the tip! Although I did try that. And the drips kept forming. And I kept scraping. Until the product got too thick and it messed things up to scrape it. And the drips still formed...
Thank you so much! I used a color called "Academy Gray" from Valspar to paint our lower cabinets (purchased at Lowes). Depending on the light, it looks a little blue or a little green and we love it.
Thank you so much! And best of luck for your project. Don’t know how many hours/days because I did it in stages so we could still use part of the kitchen. But I had to do 3 separate pours because the surface was too big (not at all recommended, but didn't have a choice since I did it by myself). I would guess probably 4-5 days (including the prep & cleanup), then had to harden/cure for a few more days. Hope this helps.
When chipping away the drips will that not cause the counters to eventually peal? And is there a way to maybe just get them when they are still wet? Or tape underneath so the drops hit tape?
No, cutting off and sanding the hard drips didn't affect the countertop surface at all. I did try the "wiping off" technique on my first pour, until the product was too thick & sticky to do it. And the drips formed anyway. So that's why I didn't bother for the rest of the process, and removed them after instead. Perhaps it's because the edges are super rounded that the wipe-off (or tape off) process didn't work for me? Not sure. I did do another one a few months later (a wood, butcher block countertop) and the tape technique worked great. Hope this helps and good luck with your project!
Part of it is probably the light & camera angle. But also the fact that the epoxy flows and drips down the (rounded) vertical surfaces rather than just sitting where it’s applied on the horizontal surfaces. So the product will naturally end up thinner on the edges, showing the base paint color a bit more. Doesn’t look weird at all in person; just a slight, gradual change in color.
Thank you so much for the kind words! We’re still happy with it a year later. And no, I didn’t remove the sink. Just did a little follow up video to show how it has aged, and answer some of the question I’ve been getting: ruclips.net/video/vhYmYNB3I9c/видео.html
Im really happy someone that doesn't work for a major company took the time to go into detail on how to transform a granite countertop. I was looking for something like such and I am happy you posted one. By the way your project came out nice. The 6 thumbs down are just haters. Can't please everybody. Thanks again. 😊
Your comment just made my day! Thank you so much for taking the time to write this kind & encouraging message. You're awesome.
I did SO much research before diving into our project, and like you, wanted to see some "regular" folks trying it out. So I decided to document the process to hopefully help/inspire someone.
Best of luck with your project(s)!
Ive worked with this product and it does stain if you dye hair. Even if you clean right away.
👏🏽👏🏽👏🏽
Not bad for a 1st timer! I do have a few suggestions for your viewers...
Use Bondo to smooth out all even surfaces and to cover all seams. Unfortunately, you’re never going to be able to hide that seam in the granite unless you redo the whole project.
Always do one surface together. Never do a single surface in sections.
3 ounces per square foot for your project
Apply between 70° and 85°
Make sure the epoxy is thoroughly mixed or it will never properly cure!
Use an 1/8 in. square notch trowel to spread
Remove all loose strands from the paint brush before using where they will end up in your project.
Add mica powder to 90% isopropyl alcohol in a spray bottle for a really cool effects!
Scrape the underside with a tongue depressor, (or any flat object) WHILE ITS CURING and you will not have to do all the sanding or scraping after it’s hardened.
For fully detailed, step-by-step process to apply epoxy to any counter the two top dogs for epoxy counters are Stonecoat Countertops and Legari. both companies have their own RUclips channels and both go to great depths to teach you everything you need to know for a perfect counter. Stonecoat Countertops goes to the extent to teach you how to build a custom countertop!
Thank you Chris. I did the best I could considering my lack of experience, and hubby & I are pretty happy with the result!
I appreciate your suggestions. Although I did try to "scrape" the underside of the counter to avoid ending up with hard drips (and extra work), but that didn't work so well for me. I wiped SEVERAL times on my first pour (bar top), until the epoxy was too "gooey" and it didn't work anymore, and still ended up with drips.
And clearly, there's no need to promote Stonecoat or Legari as they are ALWAYS the first ones to come up in a search, as all the viewers know. They do great work and have wonderful videos, and I learned a ton from them. I did a lot more research and found that their videos were missing a few small pieces (for a beginner), which is why I decided to document my process; just in case it helps an inexperienced person like me gather up the courage to give it a try!
When you have time, take a look at some dirty pours. It may inspire you to try another project.
Yes, I have seen videos of that technique and I LOVE it! Will have to try it at some point.
I really like the way you broke it down and the tips you gave at the end based on your experience throughout the process. Thank you.
You are so welcome! Thank you for your kind words. 🙏🏼💕
Good job for first time. Keep up the good work. I also like how you showed your very minor mistakes. I use this stuff so much and enjoy making new projects.
Thank you!
Great job! A couple of tips though...A 1/8" notched trowel wouldve helped you spread the epoxy so you'd get an even coat and if youd have come back with a paint stick while the epoxy was still tacky you couldve wiped off all thise drips before they hardened. It would have saved you a ton of work and given you a more finished edge
Thank you!
I appreciate you showing us all the bloopers along the way. Thanks it really helps!
iamtinika I’m so glad! Hopefully a few people can learn from my “mistakes” and do an even better job!
I love that you and hubby are both lovingly putting in sweat equity
You are so kind, thank you! 🙏🏼💕
We remodeled the whole house by ourselves during the pandemic. Definitely a labor of love, and so fun to do it together. 😊
Wow oh wow this looks so great! I don’t know if I could ever pull this off but I am so impressed by your ability
You are so kind! Thank you so much for taking the time to write this sweet comment. 🙏🏼💕
FYI: I was soooooo scared, and it took me weeks to get started even after I ordered all the materials. But it worked out!
I say you can TOTALLY do it if you choose to! 💪🏼💪🏼💪🏼
@@MagdaMolina ok that’s it. I committed. I want a glittery kitchen and I ordered it. Thank you I needed your encouragement. Stay tuned. I will let you know how I do
@@tatonkapeach YAY!!! Best of luck! And can’t wait to see how it turns out. 💕
I love the positive reinforcement from your husband. 😊
Thank you. Me too! 😉💕
Great Video, I finished a countertop following your instructions, great results only one thing: to avoid cut drips at the end " remove the drips as you go "
This makes me so happy; thank you so much for letting me know!
As for the drips, I did try to wipe them off, several times in the first couple of hours (on my first pour), until the epoxy got too think & gooey to wipe it off without messing it up. But they still formed. So I didn't even try for the rest of the countertop.
But a few people wrote some good drip-removal tips, so I will try them when I do our 2 bathrooms!
Many thanks for this very helpful video. I have been watching Leggari but it was great to see a non professional attempting a counter top. I have been wanting to do a fairly scratched glass dining table top and I now feel I can have a go at doing it. Cheers Marie ‘downunder’ 😀❤️😀
Thank you so much for your kind comment Marie! I know there are (many) much better videos out there, but I documented (and shared) my process for precisely that reason: to show that a regular, inexperienced person can actually do it.
Best of luck with your table!
Outstanding step by step presentation. Very clear and easy to follow. Exceptionally well done. Thank you, very helpful tutorial. Among the best DIY instructionals that I’ve seen on RUclips.
Thank you so much for the kind words and feedback; your comment made my day!
I documented and shared my process hoping to help someone (like me) who was nervous about trying this.
This is a really good “how to” video and the final look is awesome. Good job.
Thank you so very much for the kind words! Much appreciated. Happy holidays to you & yours!
Very nice very nice. I'm glad you took the time to show each and every step and didn't talk so fast that we had to go back and Rewind. I was hoping for more color and marbling, but that's just my preference. I will do that in my house. Yours looks really really lovely. I'm glad you said it takes a week or two after before you can actually put things on it. That makes a difference but of a self-leveling part is key. I can't wait to get started
Thank you so much for your kind words. And best of luck with your own epoxy project!
Thank you for doing this and taking your time to show everything. I feel more confident about making over my granite countertops now! :)
That’s precisely why I documented the whole thing and shared it!
Thank you so much for your kind words and best of luck with your project! 💕
This was like therapy to me. I hate granite counter tops.
This made me laugh out loud. Literally.
Thank you! 😂😂😂
(I feel the same way. Especially the hideous 90s granite)
Quick tip. Do a thin skim coat of the epoxy around the edges with the brush before hand. It'll flow over easier than a dry surface.
Thank you!
This is great! Thank you for documenting your process and posting this! It is a lot of work. I have ugly granite countertops too (I know...boo...hoo! Granite counters, right??) We were going to remodel our whole kitchen but because of job instability due to Covid, I've decided to diy it. I might even tackle the countertop! I like your calm and detailed explanation. Thank you for the inspiration!
Thank you SO much for taking the time to write those kind words! I really appreciate it.
And best of luck if you decide to tackle your countertop! #youcandoit 💪🏼🙏🏼❤️
Omg SUCH an improvement. I have granite too and Ik it’s still a “nice natural stone” but I just hate it 😂!!! I love the clean marble look! You did such an amazing job!!
Thank you so much for your kind words!
Natural stone or not, we just hated that 90s granite. My husband called it the “cat box”...! 😂
We’re super happy with the new countertops. ☺️
OMG!!! Magda! You are giving the guts to do my countertops!!. I've been watching videos (Stone Coat Countertops RUclips channel) and wondering if I can do it! I'm sort of handy woman, but this task looked intimidating over all. With your step by step video I think I can do it!!!
This makes me SO happy!!! And that's precisely why I decided to document my process, put together a video, and share it. I was super nervous and it took me days (after I had all the necessary materials) to gather up the courage to dive in, but I'm super happy I did.
Just do a little practice (or 2, or 3) on a small surface to feel the epoxy and try out some colors/styles and you should feel better about it. You can totally do it!!!!
Thank you so much for taking the time to give some feedback, and for your kind words!
i absolutely loved your thorough explanations, I also love the fact that you're not a pro that's skating through the topics. You make sure to explain as you go. I am also a first timer gal, trying to redo my countertops. I just painted them with Giani countertop paint and now I want to finish with Epoxy Resin. It is fascinating but very scary for a first timer like myself.. Let's just say, during this whole process, my husband has asked me a million times to not ruin the countertops so now, im out to prove myself haha
You are so kind; thank you for taking the time to write this great comment!
I was a first-timer too when I documented this process, and terrified to mess up... it took me 2-3 weeks to get started even after I got all the supplies! So I TRULY understand your concerns.
But we're super happy with how it came out. And the great thing about epoxy is that if you don't like the look, you can always pour over it and re-do it differently.
Good luck with your project! YOU CAN DO IT!!!
@@MagdaMolina wow thank you for the reply!!!! I really appreciate it! Yeah, I am still making my way through the giani paint on all the granite countertops. It’s literally taking forever!
That’s good to know with the epoxy because I thought it was a permanent “you’re screwed if you mess up” kind of thing! I bought some mica powder as advised and I’ll start to put some things together. Crossing my fingers!
Best of luck with your countertops! I'm sure they're gonna come out great.
@@MagdaMolina thank you!! Well so far, I made a bit of a mistake. I tried to chop in some color like you taught me but it ended up making it super thicken and uneven. I got the self leveling epoxy so, now I have to sand down the stuff and start again
That's a bummer. Not sure how that could've happened... My experience is VERY limited (just that one project), so I'm not really in a position to diagnose the issue, but from all the research I did before doing our countertops, I would say it was one of 2 things: Either you tried chopping in the colors a little too late in the process and the epoxy had already hardened too much. Or perhaps something was off with your mix (not quite equal parts, or not mixed thoroughly enough).
Might be a good idea to read what some experts have to say about it, to make sure you don't have the same problem on your next pour.
Good luck with it!
Beautiful! Thank you for the detailed video. We are looking to redo/update our granite bathroom countertop. Your video helped a lot!
That makes me so happy! And that was my main reason for documenting and sharing my process. Thank you so much for taking the time to write this kind comment! 🙏🏼💕
And if you’re curious, I just posted a 1 year follow up video to show how the countertop held up. We’re very happy with it!
@@MagdaMolina I will go look! :)
Magda - awesome video!! You are so incredibly creative and talented, I marvel at your creations. We send our loves and best wishes, can't wait to see the masterpiece in person. xxxooo S & C
Sheryl Carlucci thank you so much for your kind & supportive words sweet Sheryl!
Please come out and visit soon! We miss you guys and would love to spend some time with you. 😘❤️💕
Love, love how this turned out!! Thanks for sharing ❤️
You are SO welcome! And thank you for taking the time to write this kind comment.
Excellent effort. Put tape under edge of countertop before pouring epoxy to eliminate all that sanding off of hard dripped epoxy. Also, prior to pouring epoxy, tape vertical edge of countertop to create a dam effect. then when finished pouring and adding stuff to the pour, remove the tape. Roughly 1 hr after pour.
Opinion Minion2020 thank you for the tips!
Unfortunately our countertops don’t really have a “vertical edge”; they are rounded.
This is SO HELPFUL!!! I am knocking around this idea and am happy to see that a “real person” can do this. I generally have no skill at this sort of thing but you make this look doable! I will share my results if I ever have the courage to do this. I do have a question: Did you leave your backsplash in the original granite? I would be covering laminate counter tops from the 1970s. And... your counters look amazing.
Thank you SO MUCH for your kind words! Means a lot.
I was super nervous about doing this, and it took me a couple of weeks to gather up the courage to dive in, even after I had all the products. But super glad I did!
Now I just pray that it holds up with time... but so far so good! (after 2-3 months)
I ended up doing brushed aluminum peel & stick tile on the backsplash. I posted a link at the end of the video description where you can see before and after pics of it. Check it out!
And best of luck with your project! #youcandoit
Well done. Loved how your husband jumped on camera. Letting the world know she is taken. #DIYQueen #Lovecalihomes
Ha! Your comment totally made my day! And my hubby loved it too! 😉
Thank you. 🙏🏼☀️
Great job! You are a brave lady because I was afraid it was going to start hardening before you were ready for it to hardern.
Thank you so much for your kind words! I was really scared/nervous, but it all worked out in the end!
Came out beautiful
Thank you so much! 🙏🏼💕
Omg this is what i wanted 😭😭😭😭these are happy tears.
Glad to hear this! 😊😆
This is a great video, I am ordering the products from Amazon, I am covering a cabinet with a granite counter top, I saw your video so I know what to do or not to do, thank you so much for posting it. I am doing a very similar version of Black Galaxy granite, wish me luck!
Thank you so much for taking the time to write some kind words Patricia, I really appreciate it. And best of luck with your project! I'm sure it's gonna look amazing!
Great job!! You missed a great video where you tape all around your counter with masking tape or blue tape so the epoxy doesn't run off until you remove the tape. Then it will continue to level and run over the edge. Then take a paint stirrer or a gloved hand and wipe the underside and remove all drips. Way less work and no sanding or scraping.
Thank you! I have learned that since; will make my next project a little easier! 😉
wow you did a great job i love those colors! after seeing your video it makes me feel like i can do it. your so inspiring. thanks for sharing
You are so kind, thank you so much! It makes me super happy to read your comment and to know that my video made you feel like you could do it too! That was my hope when I decided to document my process and share it. Yes you CAN do it!!!
Nice job, sanding the drips with the Dremel is a good idea. Scraping the epoxy bucket is usually the result of soft spots, but it seems you got good results.
Thank you!
It looks great I also started on my granite counter top. I am going for marble, for Next time for the drips wipe them of with stick even with ur fingers while drying , it will save you the hustle.
Thanks for the kind words, and for the tip; I'll try that next time! And good luck with your marble project.
Wow this looks amazing... I wish I had to confidence to do this myself, I’m scared tho. Does this chip, or damage if you put a boiling pot on the counter?
Thank you so much Gisselle! I was pretty scared too before I started, but it turned out pretty good. And I love the look.
Although I can't answer from extensive experience yet (finished the countertop only about 2-3 weeks ago), epoxy is supposed to be very durable. Did a bunch of research before diving in.
Epoxy is heat resistant, but not heatproof. You can set a hot dish on the surface without instantly ruining your countertop. Keep in mind that if you leave a heated baking dish or a hot coffee carafe on a layer of epoxy, it will eventually damage the surface. It's smart to use trivets for hot pots to protect epoxy counters or any type of kitchen countertop from heat damage.
Very nice, just a few tips, you can remove the drips an hour later just using your fingers with a glove if they are still able to do it like that, otherwise you can use a blade that can cut off all the drips that are still soft, in the event you find your self in the situation of having all the drips for days and really hard.. you can use an orbital sander with a 100 grit sand paper , before tape the area to protect the cabinet finish, but overall the job came up nice for first time.
Thank you for the tips!
Wow, great job and lovely personality
Thank you! That’s very kind of you. 🙏🏼
Looks fantastic! ... Great job. You could've saved yourself a lot of work & mess by taping off your counters edge, just until it started to harden a bit to slow down the flow, during the self leveling process, removing the tape around the outer edge, then allowing the epoxy to ooze over the edge evenly & then taking a metal scraper along the bottom edge, as it begins to dry ( within 1-2 hours) ... this would have completely eliminated the step of having to sand off the drips entirely & thus avoiding the time, energy & mess of that step. Your project turned out beautiful & love the colors.
Sincerely,
Michelle🙂
Thank you so much Michelle! I appreciate your kind words and helpful tips.
I did try to wipe the drips several times as the product was settling, but they just kept forming. Until the consistency was too thick & gooey to "wipe". A few other people recommended the tape trick, and I will definitely try it next time. I have LOTS of room to learn and grow!
Thanks again and have a great day!
looks incredible
Thank you SO much!
Thank you!!
I’ve been trying to find a video and can only find faux granite. We have lovely granite counters but they’re too brown and we’re in the process of painting our cabinets white so I’d like to paint my counters as well now. (Probably black) Love the outcome, great job!
Thank you so much for the kind words! Much appreciated. And best of luck with your project!
Any updates in use and durability? Issues with heat?
Great job on the video. We just purchased another home and it has the darker, mottled, granite counters. We hate how it hides just about everything. Those gorgeous light counters you did would make it easy to spot a spill.
Well done.
Thank you SO much for the kind words! 🙏🏼
We’re still super happy with our countertops a year later. And I’m actually planning to post a follow up video in the next few days as several people have been asking. Stay tuned...! 😀
Great video. Thanks for sharing. I am planning to do the same on my granite countertop.
Thank you for taking the time to write some kind words. And best of luck with your project!
Counters look great!
Thank you so much!
1 year has passed, how is it holding up? Pro and con please
I was JUST about to ask this exact question. Fortunately, I continued reading comments first . Certainly would love to know! I have e the same ugly countertops in a home I recently purchased
Here’s the 1 year follow up video: ruclips.net/video/vhYmYNB3I9c/видео.html
Great video!! Appreciate how you broke down steps and explained things. Teaching is great coming from someone inexperienced. Are you a teacher? 😊. Thank you!
You are so sweet! Thank you so much for the kind words.
I’m not a teacher, but I do enjoy helping people understand things. 😊
I’m glad you enjoyed my little video and I hope it helps you with your project!
It looks amazing. Can you please post all the products you used 🙏🙏🙏
Thank you so much! 🙏🏼
We really love how it came out!
You are my hero!
@@madeleinecastillo5014 ha! You’re so kind. Thank you! ❤️
Very thorough. Thank you! I am going to do this.
Jennifer Castiglioni awesome! Best of luck with your project! 💕
BIG KITCHEN, LOOKS NICE!!!
Thank you so much! 🙏🏼
Very NICE! Will be doing this week!😊
Victry1 Nolan thank you so much. And best of luck with your project!
You did a great job! Thanks for this detailed video. Did you buy your epoxy materials online or at a local store? What tips do you recommend for choosing a color/mixture? Thanks for your help! - Kenya
Thank you so much for the kind words!
I did this countertop right after the pandemic hit last year (April), so I couldn't go to a local store. Bought everything on Amazon and it was super easy! All the products I used are listed in the video description, with links (not sure if they're still available though).
Based on my (very limited) experience, I would say that it's important to pick the right background color for the look you're trying to create. In my research I saw that you can also add the paint into the epoxy mix for an opaque look, but that's not what we wanted. Also, I had fun choosing mica pigments (powder); they come in so many different, beautiful colors!
My best advice is to do some tests. Mix a super small batch, and play around with your colors. Test on a piece of wood, plastic, or stone (if you have one) and write down your "recipes" to be able to replicate. Repeat until you get a look you love!
Hope this helps. Best of luck with your project!
This is beautiful 😍
Thank you so much! 😊
Ive done this as well. Dont put a crock pot on the counter during the cooking part. The heat turns the epoxy yellow.
Thank you for letting me know. We always use trivets for anything that’s hot, just to be on the safe side.
Very encouraged! They look modern and beautiful! Granite is so yesterday!!
Lily McWhorter thank you so much! 🙏🏼
My hubby & I felt the same way. He called it the “cat box” granite!
Saludos desde Buenos Aires Argentina muy buen trabajo
diego laube Muchas gracias!
I didn’t read all these comments but just wanted to mention a tip...you could have saved yourself A LOT of time and trouble by wiping those drips w a paint stick or anything similar as the epoxy is setting. Just check on it every now and then and scrape the drips off of the underside w the stick 😊👍🏻.
Barb Mahoney thank you for the tip!
I actually did try to wipe off the drips. Several times. Until the product got to sticky and messed up the epoxy coat around them. And more drips still formed. 😕
Very well done
Mark Sliepcevic thank you so much! 🙏🏼
You could have removed the overrun (drips) by using your brush to remove it before it dried.
Can you link the epoxy you ordered from Amazon?
Chris Serravalle of course! Here it is (comes in 2 different sizes, I believe): Crystal Clear Bar Table Top Epoxy Resin Coating for Wood Tabletop - 1 Gallon Kit www.amazon.com/dp/B01LYK2NAG/ref=cm_sw_r_cp_api_i_u7d0EbVH5AKXS
Magda Molina Thanks!
Looks really nice well done 👍
Thank you so much! ☺️
Excellent
Thank you! 🙏🏼
It’s pretty nice.!! What grit sand paper you used on the granite?? And are you going to remove the backsplash?
Thank you!
I used 60 grit sandpaper (pretty gritty) and it seemed to to do the trick! The point (from the research I did beforehand) is to just "scratch" the granite a bit so the primer has something to adhere to.
And if you're curious about what I did with the backsplash, I posted a link at the very bottom of the video description so people can see the finished product.
Good luck with your project!
I really hope you see this comment and respond because I am struggling to find any videos on this! I am looking to redo my bathroom granite countertop. It is old and dark and does not match my kitchen. I only what a plain white countertop. Can I use the rust-oleum tub and tile kit or should I buy exactly what you have in this video? Thank you so much for this awesome video!
Hi Tabitha and thank you for your kind words!
Let me start by saying that I'm no expert in the matter... but I did do a ton of research before doing this project, and I did another countertop a few months later. Also, I refinished an old bathtub with a (different) great product.
So, the advice I would give you (with my limited experience) is to use an epoxy based product. I've seen the result of those rust-oleum bathroom kits: they look great for a minute, but the product starts to deteriorate very quickly with any kind of use. Within a couple of months the product starts to peel and get scratched. Epoxy based products are MUCH more durable.
So you what I would do in your situation is either add white paint to regular "table-top" epoxy (like the one I used in this video), or use the same the kit I used for my bathtub refinish (it's already white).
Epoxy is more expensive and more work, but well worth it in terms of durability in my opinion.
Here's my tub video if you want some info: ruclips.net/video/-w786AFz8xE/видео.html
Best of luck to you! You CAN do this!!!
That looks beautiful
Thank you! 🙏🏼💕
Love it.absolutely stunning❤️
Thank you so much for the kind words. 🙏🏼
We love it too! 😉
@@MagdaMolina how is it holding up?
@@aprilepp74 It’s been about 9 months since I completed the project, and it still looks great! We’re super happy with it. No noticeable change in color. Only "micro" superficial scratches from daily use (which will happen on any polished/glossy surface), but those are only visible in a very bright, very direct light. Otherwise not noticeable.
Will post a follow up video at the 1 year mark.
Looks great but Omg you could have saved so much time and dust if you would have wiped off tje drips when they were still wet. They also peel right off if you use blue painters tape!
Julie Rathe thank you! Like I have replied to several other comments, I did try to wipe them off. But the drips kept forming.
Perhaps I’ll try painter’s tape next time!
GREAT JOB LADY :)
Thank you!
Beautiful result Magda! Thank you for sharing. So, if I wanted just white I don't add any color flakes, right? Thank you!!
Hi there and thank you for the kind words!
Yes, you are correct. The epoxy is clear, so if you don’t add any colors, flakes, powders to it, it will just show your background color (whatever that may be).
Just be aware that it tends to yellow a little bit over time (especially in areas that stay covered - like, by a small appliance), and that’s much more visible with a light background.
Best of luck with your project!
OMG I am considering doing this. I have stains all over mine that I can't get out. BUT I am petrified ! I love the color of yours etc. I would do the same thing pretty much.
Thank you so much!
And just so you know… I was petrified too! Had done a ton of research, and purchased all the materials, but it took a couple of weeks to gather up the courage to dive in.
And I’m really glad I did! We love our countertops and they’re holding up really well (been almost 1.5 year).
Best of luck with your project; you can do it! 💪🏼
Great job!! What was the approximate total price of the project?
Steven Anto thank you so much for your kind words! 🙏🏼 The total cost was about $260-270 (epoxy alone was about $175 as our counter surface is extensive). Hope this helps!
I really want to change mine. Im just scare to do it lol.
You could of cleaned up the drips off the bottom when it was still wet. Saves you the extra work
I was super scared too, but we hated the old 90s granite so much that I figured I didn't have much to lose! That's also why I documented my process, to hopefully give a few people the courage to try it.
As far as the drips go, I DID wipe them off while the product was wet (several times), but they kept forming. Until the product was too thick & gooey to wipe off cleanly.
You should probably wear a respirator instead of just a mask. Lots of dust when sanding and you don't want to breathe it in. The respirators at the big box store start at under $40 and can be used over and over.
I am learning this process too and I understand you can wipe off the drips about an hour after you finish your work and again every 30 minutes until the dropping stops..
Good luck with your projects !
Thank you!
Why would you do this to natural granite countertop??
They were and tacky brown.
They get old with time. And to change color. I hate mine! Browns 😅🤪I want them white
Because it was really ugly and this looks so much better
I'm going to do this over my ugly brown granite.
@@freeangie11 yeah but to be fair she could have sold it for a decent amount of money Granit is still worth something and bought a basic wooden one so she may have had everything for free
Looks really pretty! Hey, so if I have my design already on with my paints, can I use the clear coat epoxy with one pour? Or, do I pour once and then lightly sand it and do my second, final pour? I guess I need to know if I can get away with one pour because my colors are done already?..?? Anyone? Thanks
It's better to clean up the drips while it is still wet. You tend to make more work for yourself after the fact of epoxy getting hard.
I can understand doing this over laminate....but, granite?!?? Why????? I would love the granite in my own kitchen. It's a natural material that will never go out of style!
Elizabeth Perry I’ve done several epoxy over granite countertops
They get old too. Rough. Or to update color? I have granite and I hate the browns. 🤪😓🤷🏽♀️I want more of a marble look
Lol it’s definitely out of style. Just because it’s natural doesn’t mean it doesn’t go out of style.
About to do this to my granite counters. They are like diarrhea colored and it makes me feel sad looking at them. I want something light and bright. Plus, the epoxy can be removed from the granite, so it’s not like it’s permanent or the future homeowners can’t revert back.
Right!!!
I wish you would have filmed around the sink 😭 did you epoxy the sink countertop and then install your sink and faucet?
We couldn’t remove the sink without taking out the countertop, so that wasn’t an option... 😉
We did remove the faucet though.
And it was actually easy to epoxy around the sink. I just put plastic in the sink to protect it; taped it really well around the edge (under the little overhang). Then I just let the epoxy spill over the edge on all sides while applying.
Great video! Just what I’ve been looking for. We hate our countertops. But couldn’t find a thorough video that broke everything down. What kind of sandpaper did you use?
This makes me so happy! ❤️ And that’s the reason why I documented my process; because I couldn’t find a fully broken down video either when I did my research. Used 60 grit sandpaper with our sander to open up the pores of the granite a little bit. Hope this helps! And good luck with your countertops! 🙏🏼💕
You should tape around the counter .!
Agreed, a tape "dam" around the edges is best until it sets up enough that it doesn't just run off.That's how they do it on the Stone Coat Countertop channel, and it works so well!
Very cool!! Would you be able to tell me how you did around the stove and sink?? Not sure how to do that?
Of course!
It’s all about taping off and covering w/ plastic all the area you don’t want epoxy on. Our stovetop we were able to remove and cover that empty space with plastic. The sink couldn’t be taken out so I covered it with plastic, taping it under the edges.
And then I just let the epoxy flow over the edges into the plastic.
Hope this helps!
I loved, you are the best!!! Gorgeous!
You are so kind. Thank you so much! 🙏🏼💕
Were you able to do the granite backsplash too in the epoxy?
Hi Karen! No, unfortunately we couldn't. In order to work properly, epoxy has to be applied to a horizontal surface. What we could have done is cut some plywood to backsplash size, epoxy it, and then glue it to the existing granite. But it felt like it would be too thick, so we just tiled over it instead (metal peel & stick). Hope this helps!
Magda, I product epoxy counters for a living and you can apply epoxy vertically. I wish I would have caught this when you uploaded it and could have suggested the additive to thicken and cure the product for vertically.
Way to tackle a tough project!!!
@@BigBenny1 Awesome! Thank you so much for the comment and information! I will have to keep that in mind for our shower walls... ;-)
Jab Co What product do you use to thicken the epoxy? Thank you.
Looks great! Any way of listing all the products you used??
Thank you so much!
The epoxy I used was already listed, and I just went ahead and added links to the other products I used for this project.
Hope this helps!
My granite is so ugly and doesn’t even match. Owners put a random cheap slab on the island. This is a perfect solution.
It sure worked well for us!
Beautiful job! I'm going to try this in a couple of months. Happen to know if any hardware stores rent out tools vs having to buy them?
Just have your counter tops replaced stop being. Cheap and treat your self
Thank you for the kind words, and best of luck with your project!
I don’t have information about tool rental, sorry. But I’m sure many hardware stores do rent them.
Thank you for the kind words, and best of luck with your project!
I don’t have information about tool rental, sorry. But I’m sure many hardware stores do rent them.
You needed to wait until the epoy hit a mid point in its cure time and scrape the bottom edges with a stick so you dont have to sand them.
Thank you for the tip! 🙏🏼
you can use a foam roller to spred it out too
So if you put tape on the bottom Edge before you pour actually two layers of tape on the bottom Edge before you pour once it's dried like the next day her that evening just pull the tape I got a nice clean Edge no drips bubbles
Thank you!
I purchase all of the items to do it but I am concern of the smell. Does the epoxy has a strong smell?
Thank you for your question.
The product I used had no smell or fumes, which is why I picked it (and am not wearing a mask in the video).
I know it’s not the case with all epoxy products though. I’m sure you can find that information about the brand you purchased.
Good luck with your project!
I'm looking forward to doing this in my kitchen, but quick question, how the epoxy looks so far?
Thank you
It’s holding up really well and we’re very happy with it (and it’s been almost a year)! Some scratches, but that’s normal on any kitchen surface; especially because it’s so shiny. But you have to look for them; they’re really not visible.
Best of luck with your project!
When did you remove your painters tape? Great job btw....
Thank you so much! 🙏🏼
The painters tape has to be removed before the epoxy is set/cured, otherwise it’ll stay stuck in it. Best to remove right after you’re done applying the epoxy, while product is still flexible.
Im Curious how you think it would look all white. In our home we had a friend who was a landlord and we ended up buying the house from her but when she did the granite she got the absolute cheapest and it is black and I’ve hated it from day 1 but we cannot afford a new one now but I love the all white quartz do you think that could be accomplished?
I know the feeling... The only thing we hated about this new house we bought were the countertops. And didn’t have the budget to replace them. So that’s why we explored the epoxy option.
From the research I did, I’m pretty sure you can do any color(s) you want. And I know for sure it would cover the black. The only thing I would recommend researching before doing it, is the yellowing factor. We haven’t had that issue, but I came across some comments about it. And on an all white surface, it would be very visible.
Best of luck!
@@MagdaMolina what was the solution you came up with?
@@Tinaillcutyou well, the epoxy I used is supposed to be resistant to yellowing (according to their website), and also, putting some color in it (which I did) makes it less likely to show if it does end up yellowing a bit over time. Ours still looks great after almost a year.
With an all white surface, it would show right away, which is why I recommend doing some thorough research beforehand.
@@MagdaMolina can you please tell me if you got it from a company in Oregon
@@Tinaillcutyou all the product I used are listed in the description. The brand is Pro Marine Supplies (tabletop epoxy) and I purchased it on Amazon.
How much epoxy did you use for how many square feet? looks great, thanks for sharing
Thank you so much!
I did a bunch of research about how much epoxy would be needed, and I ended up using about 1 quart per 10 square feet of countertop. And that was plenty.
Hope this helps!
@@MagdaMolina thank you. just did a test on a small folding table this weekend. works great. thanks for sharing
Also when did you add the flakes, into the mix before you used the paddle drill to mix? did you have an issue with the flakes sticking out of the epoxy? I think the flakes I got might be too big. Did you do any sanding between the first coat and the second? how much dry time?
Good morning Beverly!
The mica flakes I used were fairly big, but really delicate and flat. I sprinkled them on the directly first coat right after applying it, while it was still very wet (didn't mix them in). I was able to "push" most of them in with my brush, but not all. The second coat covered them all completely.
Best of luck with your project!
Hi, you should have scrapped off the edges when it was still a bit wet, before they dried out. It’s much easier and piece of cake.
Thank you for the tip! Although I did try that. And the drips kept forming. And I kept scraping. Until the product got too thick and it messed things up to scrape it. And the drips still formed...
What color is your cabinets.... there very nice I love the way the counters and cabinets look together
Thank you so much! I used a color called "Academy Gray" from Valspar to paint our lower cabinets (purchased at Lowes). Depending on the light, it looks a little blue or a little green and we love it.
love video about to my counters wanted to ask how many hours can i expect whole project ?
Thank you so much! And best of luck for your project.
Don’t know how many hours/days because I did it in stages so we could still use part of the kitchen. But I had to do 3 separate pours because the surface was too big (not at all recommended, but didn't have a choice since I did it by myself). I would guess probably 4-5 days (including the prep & cleanup), then had to harden/cure for a few more days.
Hope this helps.
When chipping away the drips will that not cause the counters to eventually peal? And is there a way to maybe just get them when they are still wet? Or tape underneath so the drops hit tape?
Yes..use a paint stick about a 45 min to an hour to scrape it off.. continue to do this every 45-60 minutes and you shouldn't have this problem
No, cutting off and sanding the hard drips didn't affect the countertop surface at all. I did try the "wiping off" technique on my first pour, until the product was too thick & sticky to do it. And the drips formed anyway. So that's why I didn't bother for the rest of the process, and removed them after instead.
Perhaps it's because the edges are super rounded that the wipe-off (or tape off) process didn't work for me? Not sure.
I did do another one a few months later (a wood, butcher block countertop) and the tape technique worked great.
Hope this helps and good luck with your project!
Did you leave the edges white intentionally or do they just all looks bright white BC of the camera angle/lighting?
Part of it is probably the light & camera angle. But also the fact that the epoxy flows and drips down the (rounded) vertical surfaces rather than just sitting where it’s applied on the horizontal surfaces. So the product will naturally end up thinner on the edges, showing the base paint color a bit more.
Doesn’t look weird at all in person; just a slight, gradual change in color.
This looks great ! Did you have to remove the sink?
Thank you so much for the kind words!
We’re still happy with it a year later. And no, I didn’t remove the sink.
Just did a little follow up video to show how it has aged, and answer some of the question I’ve been getting: ruclips.net/video/vhYmYNB3I9c/видео.html
Does the epoxy treatment make the counters heavier?
Well... it adds the weight of the epoxy you put on it!