Huawei Mate 9 Screen Repair, Teardown and Reassemble - Fixez.com

www.fixez.com presents the official Huawei Mate 9 Screen Repair, Teardown and Reassemble Guide. This step-by-step repair video will show you how to replace a broken or damaged Huawei Mate 9 display assembly, and also how to completely teardown and reassemble your Huawei smartphone. Visit Fixez.com for all of the DIY Huawei Mate 9 replacement screens, parts and tools you need to quickly, and affordably, fix your device!
www.fixez.com/...
If you need your Huawei Mate 9 repaired ASAP instead- we have you covered there too. Contact one of our skilled technicians at 866-233-6460 or [e-mail] and they will fix your Huawei phone for you. They are available Monday to Friday, 9am to 5pm PST.
Subscribe to our RUclips Channel for additional DIY smartphone and tablet teardown and repair videos! / @fixez
Like us on Facebook: / fixez.com
Follow us on Twitter: / fixezdotcom
Huawei Mate 9 Screen Repair, Teardown and Reassemble Guide Steps:
Warning:
You are performing this repair at your own risk
We claim no responsibility for any damages that might occur
The DIY Huawei Mate 9 repair tools used in this video can be found here: www.fixez.com/...
Step 1
Power down your Huawei Mate 9 phone.
Step 2 (Huawei Mate 9 SIM and microSD Tray)
Eject the dual Nano-SIM and microSD card tray.
Step 3 (Huawei Mate 9 Rear Case)
Extricate the following 2 T2 Torx screws from the bottom of the Huawei Mate 9.
Use the plastic triangle opening tool to release the clips and then pop the phone out of its metal rear enclosure.
The cable array for the fingerprint sensor, power and volume buttons, and LED flash is still connected to the motherboard, so don’t try to remove it entirely just yet.
Disconnect the cable and separate the Huawei Mate 9 rear case from the phone.
Step 4 (Huawei Mate 9 Motherboard)
Peel up the piece of black tape.
Extract the following Phillips screw and then the metal bracket.
Spudge up the Huawei Mate 9 battery connector.
Detach the bevy of cables from the motherboard.
Remove the following 8 Phillips screws.
Remove the metal bracket.
Carefully free the Huawei Mate 9 motherboard from the gob of thermal paste securing it to the midframe.
Step 5 (Huawei Mate 9 Microphone, Rear-Facing Camera and Front-Facing Camera)
Use the spudger to extricate the noise-cancelling microphone.
Detach the 20-megapixel Huawei Mate 9 dual rear-facing camera from the motherboard.
Remove the 8-megapixel Huawei Mate 9 front-facing selfie camera with autofocus.
Step 6 (Huawei Mate 9 Daughterboard)
Remove the following 5 Phillips screws.
Use the tweezers to detach the signal cable and remove the metal bracket.
Extract the interconnect cable.
Pop the following 2 connectors off the daughterboard.
Easily remove the Huawei Mate 9 daughterboard. It includes the USB type-c connector, 2 microphones, spring contacts, and some control hardware.
Step 7 (Huawei Mate 9 Loudspeaker)
Pry the Huawei Mate 9 loudspeaker up from the midframe.
Step 8 (Huawei Mate 9 Proximity Sensor and Ambient Light, Earpiece Speaker, and Vibrator)
Lift the proximity sensor and ambient light out of the chassis.
Pluck out the Huawei Mate 9 earpiece speaker.
Tweeze out the spring-contact-connected vibrator.
Step 9 (Huawei Mate 9 Battery)
Locate the peel-to-remove adhesive tab on the side of the Huawei Mate 9 battery. Keep the adhesive strip flat and wide while slowly pulling it up and away from the phone.
With a little spudgering, free the 4000 milliampere-hour (mAh) battery from the adhesive securing it to the Huawei Mate 9.
Step 10 (Huawei Mate 9 Display Assembly)
Peel the spring contact up from the midframe.
Use the heat gun to warm up the adhesive securing the 5.9” FHD Huawei Mate 9 display assembly to the frame.
Start slicing through the adhesive with the triangle opening tool. Take your time and apply additional heat as needed.
Once you have sliced through the adhesive, be mindful of the display’s cable when decoupling the Huawei Mate 9 screen from the frame.
* To reassemble your device, follow the steps in reverse order.

[@ksaksa7477]

Thanks to everyone who works in this channel a useful channel for everyone please continue. follower from Saudi Arabia

[@martinafatuzzo5067]

Hi, is it possible to put a magnetic coil inside for wireless charging?

[@SajedMansour]

thank you

[@waltergutierrez9412]

Algun video para cambiar del mate 9 lite? Gracias

[@elcarpinteroGamer]

Can you upload the video of the MATE 9 LITE??? thank you.

[@smperl0c0]

can you just replace the glass screen?

[@Xtoffer87]

I believe they are fused together. I may be possible with the use of a special machine that techs use to fix apple screens.

[@ferdinandhe5239]

looks really hard.

[@juancarlosmendoza5965]

This process it's the same to huawei mate 9 lite?

[@Fixez]

As these are two different models, there may be similarities but overall the build will be different making the repair process different.

[@stanley5733]

what cable is that in 2:12?

[@حسينعلي-ذ6م3و]

thanks

[@thecrosswordable]

I wouldn't recommend this video because you can buy an LCD + Frame - This means you don't need to use a heat gun!
There's another popular video for mate9 here explaining

[@evercamptrekking5217]

thecrosswordable do we have to teardown all parts before removing screen? actually my phone camera broken after letting hauwei service center changed my screen

[@LeminHao716]

The LCD can't be removed unless you use a heat gun. All electronic parts are attached to the frame; you have to remove them before you can remove the LCD, otherwise you will burn the electronic parts. Removing parts from motherboard is unnecessary though.

[@user-ju7bc8lh1t]

Hello, I knows it's been an year. What video do you recommend to watch for LCD+Frame?

[@mr_badr_ksa2172]

HUAWEI p9 lite

[@rhc94]

hi
i replaced lcd and everything worked. when i opened second time then screen working but no touch reaction. i checked milion times all cables, and everything seems ok. what can be a problem ?

[@vocel]

It might be the screen you got might not have original chipset.

[@jatinchaudhary3173]

are you met

[@anaslabanie471]

Thanks

[@belan91]

thank you