In this video I'll show you how to disassemble HUAWEI Mate 20Pro, include Back Cover, Battery, dual Rear Camera and AMOLED screen. Get OEM Replacement Parts For Huawei Mate 20 Pro : witrigs.com/d7myl OEM Screen for Huawei Mate 20 Pro : zegsu.com/s/djuxp
5:32 USB Cable was already removed before disassabling the USB-Port. Don't forget to remove the sim-card holder bofore removing the circuit board on the left bottom side. 4:12 Motherboard-Flex-Cable was not connected correctly on this picture. Jump back to 3:38 to see how this LYAF-Cable should be connected correctly.
I looked some videos for this topic, this one shows a good technical knowledge, for instance using the heater to heat the glue (others clips didn't), and so on! Well done, thanks!
Hmm...Better battery pull tabs than Apple's. Huawei has seriously outdone Apple in every department this year whilst maintaining the phones they manufacture at a competitive price.
How do you remove the volume/power rockers? It looks like you have to remove the plastic support in the mid frame? (basically my volume rocker has stop working and it is not the volume/power ribbon as that still functions when removed from the slot)
Did you find out how to remove the volume/power rockers/buttons? At which part of the video did you go up to fix the volume/power buttons? I hope it ain't after the part where you have to take the I accidentally spilt some uv liquid or whatever it is and my power button kinda got stuck so I tried loosening it by pulling it outwards. I accidentally yanked it out and here I am.
iam not really sure what to do. my mate 20 pro is 1 month old. and after cleaning it with a microfiber cloth ive seen that the rubber "band/glue" thats between the display and the metal casing is coming out and ripped. i bet it isnt waterproof anymore due to it.
I Accidentally poked the sim eject pin into one of the holes of the primary mic at the bottom of the phone.. hard. Did my carelessness pierce the microphone gasket or damage the waterproofing of the mic or the device?
I wanna ask something. I dropped my phone (huawei mate 20 pro) and it hit the edge of the cement then it ruined my power button. Can i have power button replacement? How much do you think for a repair?
nice to see. a lot of parts, and very small. I would like to know, did they assemble it in china by hand? And what about part tracking.?Some parts have a DMC code... some not. Very good.thank you
@Wit Rigs, do you think that after the disassembly of that phone, when reassembled it would keep all its water resistant qualities ? My phone is for screen replacement due to some line appearing on it. All that glue and stickers covering something + thermal paste let me think that they will return me some crap, so I should probably sell it and get a new one... :/
chances are they are swapping the hardware into a new unmarried body. no way would it retain it IF you have to do this much for jsut a screen. Ill wait til the green screen issue is over and re-order
@@hortonj63 I didn't had the green screen issue, my problem was a straight line through the middle of the screen. Like the entire line of sub-pixels was dead. Anyway they've replaced the phone comoletely now. The new one seems to be with BOE screen, so no issues are expected.
@@mikldude9376 Actually you won't lose the water resistance ability after repair, since they will reapply the glue and use high temperature pressure machine to seal it up again.
Video description says Sony Xperia XZ3. Lol. I thought I just watched the wrong vid. Great job on this teardown. Even JerryRigEverything haven't done this one before.
hello I ordered the rear camera, after installing it respecting the disassembly and assembly steps, the camera application no longer works and also the flashlight does not turn on anymore, the front camera does not work anymore , I tried several times but without success thanks for helping me to find a solution
Hi, I accidentally poked the Mic hole beside the sim card tray with sim card removal tool did I damage the Mic? uuhuhu Please let me know if the mic is away from the hole or did I damage the water resistant stuff. Thanks
So the battery charging "paper" are attach to the motherboard or its can be separate? Sorry im new to this. I am your fan and you inspire me bro. Nice work
Some of the component hidden in the side frame which making the disassembly tricky. The sealed-in battery is stick on the battery room which making the disassembly have to force pressure on the whole phone to remove the battery. 15+1 screws used which making the disassembly slower a bit. The whole piece copper is great but why it is not precisely tailored for the shape, it looks crap.
In this video I'll show you how to disassemble HUAWEI Mate 20Pro, include Back Cover, Battery, dual Rear Camera and AMOLED screen.
Get OEM Replacement Parts For Huawei Mate 20 Pro : witrigs.com/d7myl
OEM Screen for Huawei Mate 20 Pro : zegsu.com/s/djuxp
It's the best disassembly, thanks for names all parts
I like this phone even better now, thanks for the instructions.
5:32 USB Cable was already removed before disassabling the USB-Port. Don't forget to remove the sim-card holder bofore removing the circuit board on the left bottom side.
4:12 Motherboard-Flex-Cable was not connected correctly on this picture. Jump back to 3:38 to see how this LYAF-Cable should be connected correctly.
You saved me. I was spending a couple of minutes scratching my head how that worked out.
I looked some videos for this topic, this one shows a good technical knowledge, for instance using the heater to heat the glue (others clips didn't), and so on! Well done, thanks!
Hmm...Better battery pull tabs than Apple's. Huawei has seriously outdone Apple in every department this year whilst maintaining the phones they manufacture at a competitive price.
@@AETHR1US I hope you have a blast with it
Best song for disassembling :)
Do you have a tare down or digitizer LCD replacement video for the Huawei Mate 20X?
no, we have sell screen www.witrigs.com/oem-screen-replacement-for-huawei-mate-20-x
@@EricWitrigs thanks I just bought a replacement all ready waiting on it to come in the mail now.
Durability and Repairability of this phone looks good.
Does the screen function perfectly as b4, as in response time etc
How do you remove the volume/power rockers? It looks like you have to remove the plastic support in the mid frame? (basically my volume rocker has stop working and it is not the volume/power ribbon as that still functions when removed from the slot)
Did you find out how to remove the volume/power rockers/buttons? At which part of the video did you go up to fix the volume/power buttons? I hope it ain't after the part where you have to take the I accidentally spilt some uv liquid or whatever it is and my power button kinda got stuck so I tried loosening it by pulling it outwards. I accidentally yanked it out and here I am.
3:34 Charging flex is there. 4:11 No charging flex? What?
iam not really sure what to do. my mate 20 pro is 1 month old. and after cleaning it with a microfiber cloth ive seen that the rubber "band/glue" thats between the display and the metal casing is coming out and ripped. i bet it isnt waterproof anymore due to it.
Is the flashlight flex cable the same as the proximity sensor flex cable?
Dakika 4:12 de sökülen kablonun yönü yanlış... Takarken öyle tkmayın eksik toplarsınız cihazı
I Accidentally poked the sim eject pin into one of the holes of the primary mic at the bottom of the phone.. hard. Did my carelessness pierce the microphone gasket or damage the waterproofing of the mic or the device?
Repare la pantalla de mi celular y ahora cuando activo ubicacion o gps interfiere con bluetooth que fallo? O que rompí?
Can you put the fingerprint scanner onto a new screen if I replace my screen will it work?
what are the two dots between the cameras? can be seen @2:12 on both the panel and the phone
camera Laser AF module.
U
Is signal flex cable an antenna for WiFi or is it for 4G? Thank you so much, hope you'll answer and wishing you a good day.
I wanna ask something. I dropped my phone (huawei mate 20 pro) and it hit the edge of the cement then it ruined my power button. Can i have power button replacement? How much do you think for a repair?
nice to see. a lot of parts, and very small. I would like to know, did they assemble it in china by hand? And what about part tracking.?Some parts have a DMC code... some not. Very good.thank you
Seems the fingerprint sensor is different from the oppo/oneplus.. Is that ultrasonic?
No it is still the light based one, but idk why it looks so different
Nice video.
If wifi and bluetooth are broken (automatically turns off when I switch on wifi and bluetooth), is the signal flex cable the problem?
Subscribing because of the name parts.. thanks a lot
I do not have that thin but strong plastic card, also no idea where to buy this
lol~How about this: www.witrigs.com/plastic-opening-card
Молодцы китайцы, уровень сборки и продуманности на высочайшем уровне. Чё там с ётафоном ?
you missed that part where you remove the usb port and usb cable after removing the loudspeaker and microphones. otherwise great video
Wow thats alot of work
#gluegate , any idea why screens maybe green after taking this apart ?? I had three faulty phones before giving up , thousands still affected
@Wit Rigs, do you think that after the disassembly of that phone, when reassembled it would keep all its water resistant qualities ? My phone is for screen replacement due to some line appearing on it. All that glue and stickers covering something + thermal paste let me think that they will return me some crap, so I should probably sell it and get a new one... :/
i would not bet your shirt that water resistance would be remaining :( .
chances are they are swapping the hardware into a new unmarried body. no way would it retain it IF you have to do this much for jsut a screen. Ill wait til the green screen issue is over and re-order
@@hortonj63 I didn't had the green screen issue, my problem was a straight line through the middle of the screen. Like the entire line of sub-pixels was dead. Anyway they've replaced the phone comoletely now. The new one seems to be with BOE screen, so no issues are expected.
@@mikldude9376 Actually you won't lose the water resistance ability after repair, since they will reapply the glue and use high temperature pressure machine to seal it up again.
Sorry almost every time you open a phone it loses its waterrestant
battery part design is nice as easy to replace the battery.
what part is rhe antenna of this phone?
Video description says Sony Xperia XZ3. Lol. I thought I just watched the wrong vid.
Great job on this teardown. Even JerryRigEverything haven't done this one before.
where's the kirin 980 located?
04:06 Under the metal housing with the thermal paste on it (white stuff).
hello I ordered the rear camera, after installing it respecting the disassembly and assembly steps, the camera application no longer works and also the flashlight does not turn on anymore, the front camera does not work anymore , I tried several times but without success thanks for helping me to find a solution
Hi Mohamed, I was going to attempt this but reading your comment I'm not sure. Did you resolve this issue in the end?
Hi maybe the problem is not from the camera maybe ic chip camera also i have same problem, camera and flash not working csuse water damage
Where can i buy that special heat gun
www.witrigs.com
did you have schematic huawei mate 20 pro ?
please
Hi, I accidentally poked the Mic hole beside the sim card tray with sim card removal tool did I damage the Mic? uuhuhu Please let me know if the mic is away from the hole or did I damage the water resistant stuff. Thanks
If you need to repair it yourself, the phone will no longer be waterproof after repair.
@@EricWitrigs I mean did I break it? so far everything works. Did I damage the gasket for water resistant?
I change the battery on mine. When I start the phone only the huawei and android thing come up and then it turns of. What can be the problem ?
HUAWEI Mate 20 Pro Screen Replacement: www.witrigs.com/oem-screen-replacement-for-huawei-mate-20-pro-black
Wow u r great
Bravo 👍👍❤❤
Mate 20 Pro camera modules disassembly?
it's full of adhesive tho. what a nightmare to pull on the flex cables
good video
So the battery charging "paper" are attach to the motherboard or its can be separate? Sorry im new to this. I am your fan and you inspire me bro. Nice work
Y Boom un comentario en español... 😎😎
It says on the batteri on my huawei not to dissaselbel
NIC video
Little voice tips needed bro
Great job
Where is the kirin 980 chip?
wow this device is really complex compared to my poco f1
Can u make a honor 9 lite tear down or iPhone 5s
Wow!!
Please we need teardown of mate 20 x please 🙏
www.ifixit.com/Teardown/Huawei+Mate+20+X+Teardown/118212
Wit Rigs , im waiting for the Huawei Mate 20X Teardown Video
www.ifixit.com/Teardown/Huawei+Mate+20+X+Teardown/118212
Need a lot of rear camera
jerryrigeverything is the best at dissembling phones just do another content
У кого сейчас такой телефон в 2024 ?
Is good
Wow. Like
power button ribbon miss
Where ist the USB-PORT !!! FlexCable
mother bord connector is dammaged
Some of the component hidden in the side frame which making the disassembly tricky.
The sealed-in battery is stick on the battery room which making the disassembly have to force pressure on the whole phone to remove the battery.
15+1 screws used which making the disassembly slower a bit.
The whole piece copper is great but why it is not precisely tailored for the shape, it looks crap.
Thank God for the mute button.
The vibration motor on this device is so weak. I'm pretty disappointed about that since I always have my phone set on vibrate.
beast of a phone... like all huawei... apple is sht.. same samsung
super.air.....
Müsic please
Chào
komentar ke 2
🌚
胶水机
why i buy apple if i can buy cheaper mobile phone that have better and the same quality,apple is very2X expensive,good for american people
Hahaha... REWA technologies music
Tel me bettry model number
.....
This phone is garbage.
Justify your opinion
Max`s Account To much parts and flex cables.
@@genius8245 Good phone had many parts and every phone has flex cables🤦🏼♂️
Max`s Account I think this small motherboard could fast overheating in games and would be destroyed for short time.
you have no idea ! you justify your opinion based on cables and small parts ? lool , the future is smaller every time dude ! chill .!
Do u have display of huwaimate 20 pro