Vokera Vibe Max. Installer Mode

Поделиться
HTML-код
  • Опубликовано: 10 сен 2024
  • Putting this Vokera Vibe Max combi boiler into high and low service mode. For other gas engineers

Комментарии • 20

  • @victorvacari6884
    @victorvacari6884 4 месяца назад +1

    Hi, I've got CFS message and beeping every 10 mins, i know its due for service, howevere can i meantime to get rid of this mesaage? Thanks.

    • @northwestgascertificates
      @northwestgascertificates  4 месяца назад +1

      Hi. I had the same and phoned Vokera. They talked me through removing this. It was pretty complicated and i wish i had captured it all on a video. You will have to phone them im afraid 👍

  • @MrJayceproductions
    @MrJayceproductions 7 месяцев назад +1

    What temperature do u keep it at normally? 40 between 80?

    • @northwestgascertificates
      @northwestgascertificates  7 месяцев назад +1

      It is personal preference really. People say lowering it will save you gas but if you have a thermostat, the boiler will turn off when it gets to the temperature you have set for example 19 degrees. Probably somewhere like 65 degrees i would set it to. You don't want to burn yourself on the radiators...

  • @amansukoon
    @amansukoon 4 месяца назад +1

    How can i put timings for heating to turn on on specific times?

    • @northwestgascertificates
      @northwestgascertificates  4 месяца назад

      You need to wire in an external thermostat. I have done another video on that 👍

  • @suzannemcguinness8030
    @suzannemcguinness8030 9 месяцев назад +1

    I keep getting an A07 flash and it's at 2.2 bar and it cuts out, I think I over filled boiler when repressurizing it.

    • @northwestgascertificates
      @northwestgascertificates  9 месяцев назад

      The easiest way to lower the pressure on any combi boiler is to just bleed a radiator into a bucket👍

  • @kyabstract6509
    @kyabstract6509 7 месяцев назад +1

    Hi this video really helped me! .. BUT how do i make my heating stay on? It stays on about 15 minute then turns of

    • @northwestgascertificates
      @northwestgascertificates  7 месяцев назад

      Hi. This is really only for when an engineer is servicing the boiler. It will only stay on for 15 minutes. If you have a thermostat, that should be used to turn the heating on, if you have one??

    • @kyabstract6509
      @kyabstract6509 7 месяцев назад

      Yes i have 1 but dont have a clue how to use it ..

    • @northwestgascertificates
      @northwestgascertificates  7 месяцев назад

      Make sure it is on manual and then use the up arrow button to turn the temperature up

  • @prasildasp6492
    @prasildasp6492 6 месяцев назад +1

    I am getting CFS and the wrench icon. And it's beeping.

  • @alexhaley6271
    @alexhaley6271 Год назад

    How you doing bud did u pair boiler up with Bluetooth?

    • @northwestgascertificates
      @northwestgascertificates  Год назад

      All good fella. I didn't pair it up to be honest. Its at my house that i rent out. Dont want to confuse/over complicate stuff. Straight forward wireless programmable thermostat and thats it...👍

  • @changykhan3197
    @changykhan3197 7 месяцев назад +1

    Hi how do you change fh to celcius please?

    • @northwestgascertificates
      @northwestgascertificates  7 месяцев назад +1

      According to the manufacturers instructions you can access the "info" menu by pressing the button with the tick. I actually have never had to do this. Any problems, if you phone Vokera, they will talk you through it..👍

  • @anthonygreenwood4486
    @anthonygreenwood4486 6 месяцев назад +1

    Swap it