The Off Road Toyota Tool Kit | Overlanders Tools
HTML-код
- Опубликовано: 16 июл 2024
- The Off Road Toyota Tool Kit | Overlanders Tools
LINKS BELOW!
This is my overland/off road tool kit for Toyota drivers. I can fix just about anything that will need fixing on the trail with this setup. Check out what a good portable tool kit is, from the perspective of someone who has spent years fixing vehicles on the side of the road professionally.
Rock crawling sort of off road toolkits obviously will be way more intense than this. This video is intended for the explorer with a somewhat modern Toyota, looking to build themselves a tool kit for their off road adventures.
Below are some low cost tools to build your collection. Steer clear of the 300 piece sets for $20.00, you have been warned!
ENTIRE KIT FOUND HERE:
amzn.to/3TGzBbv
#Overland #Toyota #OffRoad
🔔 Subscribe for more!
ruclips.net/user/Independenc...
⭐️Amazon Links www.amazon.com/shop/independe...
⚡️REDARC Battery Management Systems redarcelectronics.com/?ref=in...
🌎Trails Off Road (Maps and Trails App) trailsoffroad.com?_from=independenceoverland
🛻 Front Runner Outfitters bit.ly/3gNKvYZ
⛺️Alucab ok4wd.com/brands/alucab
//Recommended videos:
▶️ My Fj Cruiser - • FJ Cruiser Build | Ove...
▶️ Effortless Camp Facuet - • Easy Running Water For...
▶️ Top Spring Gear Picks - • Spring Gear 2021 | My ...
▶️ Recovery Board Comparison - • Off Road 4x4 Recovery ...
▶️ The Overlander Map Apps - • Whats The Difference B...
//Let’s Connect:
👉 Support on Patreon 🎥🎞🖥: / independenceoverland
👉 Subscribe: / independenceoverland
👉 Instagram: independenc...
👉 Website: www.IndependenceOverland.com
👉 Merch: www.independenceoverland.com/...
//About me:
I am hear to share my passion of exploring the world, modifying vehicles, and reviewing gear to make travel that much better.
//Disclaimer:
Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide, I may receive a small commission. There is no additional charge to you! Thank you for supporting me so I can continue to provide you with free content each week! 
Авто/Мото
ENTIRE KIT FOUND HERE:
amzn.to/3TGzBbv
I have a kit with nearly all the sockets for my first gen Tacoma, including a 35mm for front axle nut. I found a good list on an online forum and started there. I added a 7/16, 1/2 and 9/16 for accessories that use 1/4", 5/16" or 3/8" hardware commonly found on aftermarket accessories. 19mm covers 3/4" socket for 1/2" fasteners. I also added some punches, files and picks that have all come in handy. And some basic electrical repair tools and supplies.
I can't even beging to explain the 10 million ways I use my Knipex pliers..... everything from AN fittings to squeezing rivets. They are one of the greatest tools ever created
They are incredible! I’ve got just about every size now in my big tool box. I agree with you 100%.
Great video! A tip I learned from the motorcycle community: when at home I do common repairs with my carry-along tools to make sure I have what I need, it works, and (most importantly) I know and remember what tools I have on hand in my kit
As an Aussie i fully agree, we are sometimes far from anywhere and need to be able to work on the 4wd / Ute / Pickup, very educational thank you.
Thanks for watching Philip. I think in Australia I’d carry a little bit more since you can get more remote than I can dream of.
Best video for the common person I’ve seen and I learned a few things. Great logic and advice! I love the BRO gear too.
Th is for checking it out Michael!
Nice job on this. Stick with it. You’re going to help a lot of people.
Thank you I appreciate that Craig
This was immensely helpful! Thank you for making it
glad you found it useful!
Nice work. Very good point on ppl just grabbing all the cool stuff.
It’s easy to get carried away and try to plan for everything. Very unnecessary though.
Great vid. Very simplistic and to the Point......Great Job !
Thanks!
It is kind of fun to watch multiple videos on tools for overlanding. Each person has specific needs and experiences. I am in Oregon and exclusively travel solo and beyond cell services. For me I try to have a more complete tool kit than if I am with a group and within cell range were I can call for assistance. I do like your tool bag. Something to consider.
These tool bags are cool, Step 22 also makes a really nice one.
realistically no one should be bringing standard socket unless its a specific socket for something specific (fuel filter housing on a 5.9 for example) Since late 90s most vehicles use metric and even if its not a standard nut or bolt, metric sizes will certainly work in a pinch. I like your style of keeping it minimal, simple but yet able to get the job done. Earned a sub my man.
Thanks for checking it out man, and thanks for the sub! 🙏
Yo, this is probably one of the best or even the best tool kit yet video yet. I use my “overlanding tool kit” for daily maintenance as well for my cars and friends cars.
Thanks Jayson! Yeah it comes in handy when I work on stuff at home, everything I need and nothing I don’t.
Thanks! I like your mindset on this one; makes sense.
Some people don’t agree with me, but I think it’s an ideal, lower weight kit.
Very well said brother will invest in this thanks 👍
My pleasure
True only prepare for yourself. Toyota is easy 10mm-12-14-17-19mm
Best tool summary I’ve ever seen!
Thank you for checking it out!
Thanks for the video mate
No problem, thanks for checking it out!
I have had good luck with the Wurth brand tools. They’re a European company, so getting the best metric fitting sizes works. I think they have only been selling in the US for a few years, but they have been selling tools in Europe for decades.
Never heard of them, but I will check them out!
Good solid advice.
I’m glad it was helpful, thanks for watching!
10mm hex - drain plug for 3rd gen Tacoma front diff. Thumbs up to the wobble. For some things you will need them when you don't have a lift to disassemble multiple systems to reach your break. I would recommend multiple 3/8 wobble extensions rather than just a universal adaptor. It is more stable when you have to reach in deep on something like a starter.
Good call! I will be building a new set before too long, for the next build as I am sure it will have some different tool requirements!
Only possible addition is a small putty knife, but a flat screwdriver can do the same thing . Great video!
Good call on that! I’ve usually got something I would sacrifice if I needed something like that, like my MSR pot scrubber. Thanks for checking out a bunch of my videos, I appreciate it!
Good video. 👍 Whenever I by a vehicle, I get a Chilton repair manual and build the tool kit from it. It saves from carrying tools I don't need.
Good tip!
Dude you’re awesome. I’m putting together my kit for a first gen tacoma. And I trust your professional judgment. Thank you, best truck tool kit video out there!
Thanks! I actually had to get in my tool kit last night at the shop, next to my giant Snap On tool kit to get some of my truck specific kit out. I can’t speak highly enough about the BROG tool bag!
Thanks for making this video!
You are welcome sir, thanks for checking it out! 🙏
@@IndependenceOverland I just bought the Blue Ridge bag in black. You might want to ask them for an affiliate link.
Yeah they don’t have them last time I checked. That’s alright though, good products are good products, even if I’m not making anything off of them.
Nice, I like this kit, especially the modular pouches and tool groupings.
The only thing I didn't see is a tire plug kit in case you pick up a nail, screw or other sharp object. You probably already have one along with a small air compressor, just thought it was worth a mention.
I actually had that kit in my glovebox when I filmed this, but I did keep one in there. Now it’s moved to the bag. Thanks for checking it out man!
It's funny holding that snap on prybar talking about not buying from Walmart but Walmarts pry bars are made in the USA by wilde tools
Good to know!
Good video. That large allen is for your diff drain and fill ports.
One you hope you never need on the trail!
For a Fact
great video!
Thank you Jim!
Great video and a very pragmatic approach to the subject.
With experience on a particular vehicle or through online research, you could probably reduce the number of wrenches and sockets further, especially the deeps...
One thing I would say to people just starting to put a kit together, is invest in the tools first, and then buy the fancy and rather expensive tool roll later.
You can get a basic canvas M1 Tanker tool bag for under $20 and it will hold a surprising amount. Its not as convenient to use given the lack of organisation, but if the tool kit is only for emergency, once-in-a-blue-moon use, then perhaps that's not such a big deal. Also, consider where you are going to store the bag or roll...
The bag fits into pretty tight places pretty easy in my experience. But yes, tools are certainly more important than the bag.
@@IndependenceOverland I really like the look of that particular bag, but I am in the UK and will shipping, import duties and other additional costs, it would be about $200 all in!
But for somebody in the States who uses a bag a lot, I think it's certainly a worthwhile investment...
I literally have a small tool kit that I use to fix my truck and my wife’s car (2015 accord) and it stays in my truck so any tool that I use for any at home repairs are with me while I’m on the road and I find that to be the best because 1 I don’t have a garage to keep my tools but for that same reason I have my tool inside my truck and I don’t even have a big truck I have a (1991 Nissan D21/Hardbody) single cab so space inside my cab is very limited I used a quinn tool set that costs me like $65 and that thing is so useful I also have wrenches and pliers and screws drivers and a full size aluminum 2 ton jack Pittsburg and a small kit from the auto powers store with electrical things like fuses, wire, zip ties, connectors, splices. All this is behind my seats 😅
It’s amazing what you can fix with a smaller tool kit with a little ingenuity!
When it comes to socket and wrench sets for your personal truck, I tell people to go online of their truck manufacture, and look up ever socket and wrench you would need to work on that specific truck and build your kits off that. I’m carrying less than half the sockets and wrenches I used To in my personal truck kit
Solid advice!
I use Tekton tools and they have never let me down.
I gotta buy that 3/8" Snap On ratchet head thingy.... I hate the Snap On truck driver, love the tools tho. I am going to have to search that one out. I've never seen one before except the big 3/4" drive ones. Neat that you can use a breaker bar to turn it
Search for it on eBay! You still get the warranty, it’ll be cheaper and you don’t have to deal with the dealer. I’m fortunate to have a pretty cool Snap-On dealer.
Good afternoon from the Great State of Texas. I have a Toyota 4 runner. I am so glad you made this video. Did I miss it, do you carry a tire pressure gauge? Also, what type of hammer should I carry? Again, thank you and have a good day.
I carry a sledge hammer under my Goose Gear platform so it can’t go flying in a roll over. As far as a tire gauge I use a digital one from Blue Point, but really any cheap gauge will do the trick. I’d just buy the Amazon special that has good reviews! amzn.to/47IotBc
I had just bought a Tacoma and was out in the middle of nowhere and my balljoint separated and I drove over my tire lol. Now I carry extra lower ball joints just because of how much a nightmare that night was
Yikes, that’s crazy!
hex socket might be for brake caliper.
What I do when I work on the truck at home I use my tools that carry in the truck and if I need to get in the tool box in the shop depending on what it is I’ll add that to my kit
Yeah that’s the move. If I install something new that takes some odd size, I make sure to add that as well. Such as a roof rack Allen head size.
Thank you so much for the very helpful tool kit tutorial. I tried to access the link of the tools for your Toyota in the tool kit found here link, but when I clicked on to it ,the page said SORRY. Is there another place or link where I can find a list of the tools you mentioned on this video tutorial? Thank you
Thank you for letting me know! I updated the link, it should work now! Thanks again!
What brands do you consider high quality tools? I've always had whatever from Lowe's or Home Depot. I've been planning on putting together a quality set of portable/travel tools, similar to your setup. I've been eyeing their zip up tool bag with the 6 Velcro pouches, but I do like the roll as well. I've held off, because I can't decide what brand of tools to get. Are Tekton tools any good? Looking for a little guidance. Enjoyed the video, thanks for your time.
I think the Husky brand or Craftsmen are perfectly fine. I just advise steering clear of the super cheap stuff from Walmart or the 200 piece set for 25 bucks at Autozone. If buying at hardware stores, I’d recommend grabbing a socket from the shelf and going and finding the bolt size it fits. I like sockets to fit tight. Cheap sets will have slop. If your on the side of the road fixing something and you round off a bolt because of a cheap socket, your gonna get pissed that you didn’t spend that little bit extra.
Tekton stuff is on par if not nicer than stuff you will find at Lowes, but I think it’s online only so it’s more of a pain to warranty. But usually breaking sockets is only something to worry about if your doing it for a living. It doesn’t happen all that often.
Husky is at Home Depot!
Right on, that makes it even better for getting it warrantied.
Great video thanks! Now I'm just trying to debate if I want to cannibalize my garage toolbox, or just piece together a dedicated truck kit.
If you take from the garage toolbox, I recommend keeping those tools in the 4x4 and borrowing from the truck kit, vs doing the opposite. That way if you have issues on the trail, your less likely to have forgotten something. Thanks for watching!
@@IndependenceOverland Appreciate it! SUBBED, by the way! 👊
Thank you 🙏
@@IndependenceOverland One more question. Do you have a link to the socket rails you used?
I have had them a long time, but these look identical. I believe I did have to trim them down a little shorter to fit in my kit. amzn.to/3d1VIDK
For a short cheater pipe I’ve used a deep socket on an extension over a breaker bar or ratchet.
Ditch the super 33 tape get 88. It leaves much less residue
Awesome thank you!
Great review. Looks like Amazon doesn't sell the bag anymore
Amazon may not, but www.blueridgeoverlandgear.com has everything you ever needed.
@@IndependenceOverland sold out
Hi I remember seeing this before. Good info. It piqued my interest, and a question: Being a mechanic by trade, is there a data sheet by manufacturers, of every bolt, nut, screw size etc?
There may be in the Toyota system, but I'm a fleet mechanic so I don't have access to those. A metric tool set will cover just about everything your going to fix on the trail. The nut socket I mention is this video is one of those special sizes outside of the norm.
@@IndependenceOverland Thanks! Yeah, drives me crazy how American cars since mid 80’s will have both mm/sae. MM kit was where I was headed, but just had that question in mind.
You find anything ?
Bring your rig to Canada!
I would love to! One of these days...
@@IndependenceOverland Well hit me up anytime. That toolbag is unavailable on Amazon currently.
Does that pry bar look to be about 18" in size? I need to get one, but not sure what would be the best size for general purpose.
Yes sir. It’s enough to help get a tire mounted, pop a cv out, or help bend something straight again.
I am in Pakistan. The Amazon link was not there, probably due to location. I like your tools.
Thanks for trying! 🙏
Spark plugs may need to be removed to pump
Oil out of your cylinders after a rollover . Or water , if your engine is hydro-locked.
Good call!
lol makes sense except half your truck is standard, half is metric.. so you need both in some instances
Toyotas are metric
My tire mounter goes on my roof rack. One day, it will make perfect sense.
Tire mounter?
Walmart does sell Mayhew prybars under the hyper tough brand just look at the package it says made in the USA lifetime guarantee
Awesome to know that, thank you sir!
My local store also has Mayhew gasket scrapers just look for the USA label
What is a good brand of tools that isnt snap-on and also not harbor freight? Is kobalt or craftsman a good option? Thanks
Both are good options. Buy whichever your local Lowe’s will warranty.
@@IndependenceOverland awesome thanks.
Jailbreak ovelander is helping you get on‼️
He’s the man!
what is the name of that snap on ratchet?
Part numbers FZ80 I believe is the current version, old version is FZ936A. Talk with your dealer or check them out on eBay to be sure it’s the same.
Would you be able to tell me the length of the socket rail? I know the blue ridge pouches are only about 12inchs long
I believe I cut these down a little to make them fit
@@IndependenceOverland oh ok! I ordered some of the tekton ones in 3/8 and 1/4 inch drives. I don’t think I need 3/4 and and 1/2 for a Tacoma would I?
@@AFGixxeR88 some of the bigger 1/2 stuff is good for the garage, but I personally don’t carry 1/2 in the vehicle aside from the axle nut.
You get what u pay for you know this ! Head tools yes
What was the brand on that breaker bar?
Blue Point is the shorter one, unless your referring to the adjustable length one. That one is a Snap On
Thanks!
What is the ratchet at 10:31 called?
Part numbers FZ80 I believe is the current version, old version is FZ936A. Talk with your dealer or check them out on eBay to be sure it’s the same.
I buy the cheap stuff for the trunk and emergency, stuff I could care less about. I keep the good tools in my garage 👊🏽
This video was mostly made for the people who don’t know what to take, or don’t have much experience. Those types of folks are probably building a tool kit for both the drive way, and the road. People like you and myself are spoiled with having a good tool set in the shop as well!
@@IndependenceOverland ah I see. That makes sense! Nice video. Keep the content coming.
That pry bar is not metric
🤣🤣
@@IndependenceOverland thanks for having a sense of humor
Best hand cleaner is olive oil btw
I will give this a shot, thank you! I have never heard of that before.
Lol an fj cruiser guy not liking to get dirty.... fits the stereotype well 😂
Lol well, after years of having my arms literally black from diesel engine oil it just gets old after a while.
Either this guy has never really been out west or to Alaska, or he's perfectly fine paying a several hundred $ off road recovery fee.
I live in Colorado, never been to Alaska. If you watch this video and intend to take more, that’s great. But if you assume every guy on the trail is an experienced mechanic, then you assumed incorrectly. This is intended for people looking to build a kit, because most people either carry tools that are incompatible with their vehicle or carry tools they don’t need. This is a good starting point.
As an experience fleet mechanic for 10 years, and engine assembly/machinist for 6, this tool kit is plenty for the vast majority of people.
Thanks for watching.
@@IndependenceOverland I wasn't knocking your tool choice. I think that was good advice. It was more about the minimization of trouble that one can get into in the US. To say that you don't really need to worry about getting stranded in the US because you're always close to an auto store is negligent and dangerous at best. There are many parts of the Western US where one can be several hours away from any help. Even moreso, off road recovery in only semi remote locations can cost hundreds of dollars or more. Throw in inclement weather and people can easily get in a dangerous situation. It doesn't matter what their level of mechanical knowledge is if they don't have the tools they might need in the first place.
What kind of metal box is that?
The one I filmed on top of? It’s a Snap On tool box.
@@IndependenceOverland thanks for the fast reply and awesome video. keep it up brother