Ultimate Hetzer Full Build: Loaded To The Max! Takom 2172 1/35
HTML-код
- Опубликовано: 29 сен 2024
- Takom has released 3 models with a full interior and we can build an early (2170), mid (2171) or late version (2172). In this video I am showing my work on late version. With addition of extra parts (Aber sets, winterketten from Quick Tracks, towing cables from Eureka XXL and details for antenna and machine gun from Master Model) we can create stunning miniature of Jagdpanzer Hetzer tank destroyer. The addition of figures also make it eyecatching miniature.
So check this tutorial of Takom Hetzer in 1/35 scale and create a tank destroyer that packs a punch!
Today you can check full build , painting and weathering with different products. One of them are enamel liquid pigments.
So it is loaded to the max!
quickwheelstor...
www.vms-suppli...
⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️ ⬇️
Support my work and be my Patreon - / coldemonspl
DON'T CLICK THIS! - tiny.pl/9g5bb
Instagram: coldemonspl
coldemons.blogs...
Lucas you truly are the best in my opinion. Cheers from the States. 🇺🇸
Many thx my friend! :)
Mate: how in God’s green Earth can you brush paint camo and not leave visible brush strokes? Man that’s a fine job
The key is good dilutiona and 2 or even 3 thin coats. :)
really impressive my dude, should get a shot from the perspective of the camera man in the diorama, would be neat to have that perspective alongside the diorama.
Yep. I forgot abot this perspective :)
Beautiful work, I hate modeling, so many pieces that disappear and the swear words come flying.
Yet I can get obsessed for hours working on some small detail, only to lose it once it is finished and I'm about to glue it down....
Looking at your comment, thank you even more for writing :)
Enjoy your work but, seriously, it might be wise to stop headlining your builds using the term ‘ultimate’ as if it can’t get any better…
Thank you very much! :)
GREAT JOB, I BUILT ONE 20 YEARS AGO, I THINK I'LL REDO IT SOME. JESUS LOVES YOU ❤❤❤
Many thx mate! :)
super model, chociaz pewnie drogo wyszlo z akcesoriami. w kolekcji chyba jeszcze brakuje k2 black panther z academy
Czy drogo? Nie zastanawiam się nad tym - model ma wyglądać fajnie. A K2 owszem - lezy i czeka. Może w 2024 będzie czas żeby ją zbudować. :)
Panie Łukaszu jest szansa żeby zrobił Pan model z artyleria? Np Sdkfz 251 + Pak 40?
Na chwilę obecną nie mam w planie nic takiego ale na Patreonie pokazywałem swego czasu prace nad m107 z Wietnamu. :) Zapraszam!
i would refer that degree of detailing as "ultra detailed" ; )
Thank you very much! :)
nice video I wanted to know the brand of glue you use in this video thanks
I used VMS glue. And AK Interactive.
Well done! Did you do a video on the groundwork/figures?
Please take a look at the single episodes. You should find something about groundwork :)
Another great build.Keep the videos coming it really inspires
Thank you very much buddy! :)
Would you say this one is better than Tamiya?
For me the same. :)
The tracks do not look heavy enough.
It;s your opinion. For me they are OK.
Great looking vehicle...keep them coming...PLEASE!! =)
Thank you very much buddy! :)
Wow! A beautiful job on the Hetzer Lukasz! You never disappoint my friend, and this video shows us why. Your explanations of how and why you add each element to the building, painting, and weathering of your models, is extremely helpful to any armour modeller, and I have learnt a lot from watching you work. Thanks so much for sharing both your techniques, and your skill with us. Looking forward to your next project. Greetings from Australia 🇦🇺!
Thx a lot mate for your comment!! :)
Did you apply another matt coat at the very end after using the pigments and oils to seal it? Grüße
No, I try to not use varnishes at pigments and any weathering effects :)
Did I see this one in the Military Scale modelling magazine in the UK??? :-)
Yep. There was an article in Military Modelcraft International copuple weeks ago! :)
Good job, I bought that issue in the UK and it looked the best out of all the works presented there!@@coldemonspl
@@GrzegorzBrzeczyszczykiewicz123 thx :)
The exhaust appeared later and finally ended my anxiety .
Lovely model and paint !
Thank you very much! :)
Pierwszy 🎉
Jak zwykle :)
Witam, chciałbym zapytać jaki rylec do powiększania linii podziału stosować w poj. pancernych w skali 1/35. pozdrawiam
Ja używam OLFA PC-S :)
GREAT JOB! How do you get the tow cables to bend like that without breaking?
They are copper wire - check Eureka XXL offer :)
Another repeat. You won't be concerned as I'm only one, but unsubscribed and cancel Patreon. Sorry but I'd rather no video than have the option to watch videos I've previously seen.
Your choice.
Great work, as always. I like your point about the wire thickness. I've seen too many models in 1/35 with either wire or tie-down rope that is obviously out of scale. Modelers must compare the wire or thread they use to the fingers on the figures' hands. Even rope would be the same or smaller in diameter...
Thx a lot mate for your comment!! :)
You can use baking soda as CA filler. It dries hard. People use this combination to repair guitar nut slots that are too low. It dries hard enough to withstand guitar string tension pressing down on it.
Just FYI.
Yep, I know about soda. But having ready made product I just use it! ::)
Hello mr.cold. nice job done as allways.thank you very much for sharing. And keep the Faith.it is possible i have seen this before.it looks trusted.keep going mr.cold. with sticky greetings and best regards from brandenburg.your modellmate and friend in sprues.christian
Yes mate, this is full build of episodes I published some time ago. But as I check statistics it works very good and people want to watch all at once :)
I really like the way you progress on the model. The weathering is soo nice... fabouless build..
Thank you very much buddy! :)
I ironically just received the non interior version if this kit in the mail today. Scooped it up for $18 from an online retailer. Hard to pass up at that price.
Good price for this kit! :)
Wunderschöne Arbeit die, mich auf sehr viele Ideen gebracht hat.
Danke schon! :)
Just bingeing your videos - such great technique and builds! Love the detail and learning new tricks and tools.
Thank you very much buddy! :)
That was a absolutely outstanding job on this little monster,as others have said, thst camo scheme without brudh matks is outstanding, I have said before, you are one of the true masters of this great hobby, best regsrds from Australia
Many, many thx mate! Im really happy you wrote such kind words :)
Awesome build my friend keep up the good work 👍👍👍
Thank you very much buddy! :)
This is outstanding work. Your attention to detail is what really makes this unique.
Thank you very much buddy! :)
Excellent work, a piece of art!
Greetings from Germany!
Thank you very much buddy! :)
Great Work as Always!
Many thanks! :)
Outstanding - As usual! Fabulous work!
Thank you very much buddy! :)
Fantastic build, looks awesome
Thank you very much! :)
Great little build my friend. 😀
Thank you very much! :)
wow start to finish! You brought my mojo up!
Thank you very much buddy! :)
Keep it up brother, great work
Thank you very much buddy! :)
Another fantastic build 👏
Thank you very much buddy! :)
Brilliant work! Happy to be a patreon member.
Many thanks my friend! :)
So cool 👍
Thx a lot mate! :)
You always do a wonderful job!
Thx a lot mate! :)
nice job 👍
Thank you very much buddy! :)
absolutely brilliant..!!!
Thank you very much! :)
Good model and good work 💯
Thank you very much buddy! :)
Awesome paint job
Thx a lot mate! :)
Perfect work 👍👍👍
Thank you very much! :)
Looks very good to me.
Thank you very much buddy! :)
excellent little vignette !
Thank you very much buddy! :)
Out of words! 🤩
Thx a lot mate! :)
Thanks! 😀
Dzieki frend! :)
Looks Gooood !!
Thank you very much! :)
Sensationell ⭐️⭐️⭐️⭐️⭐️
Thank you very much! :)
Nice Hetzer and crew.
Thx a lot mate! :)
Even in my best day I couldn't come close to what you do
Thank you very much buddy! :)
47 minute - "i pant the balsa woods" but there are no balsa woods and gates
Editing mistakes. :)