Thank you! I watched your video, took apart the dryer, measured the belt (93in) looked up the part number and it's listed 92 in. I realize over the years it stretched. So when putting it back together after watching your video I would have doubted myself if I had not watched the pulley and over the motor shaft part. You gave extremely clear visual on how to put everything back together. I hope 9 years after making this video you are still checking your comments 🤘🏽
Thank you sooo much, you saved me. I watched other ones before I found yours and I was like WHAT..? Watched yours, went straight to it and fixed it...Yay...!
Thanks for this! Especially the part about getting the belt around that wheel. I think our dryer is about 51 years old and we just fixed it by buying a new belt for $20.99. They don’t make them like they used too 🙃
Update: I just replaced the belt in my dryer and your video came in handy for more than one reason. You showed how to loop the belt around the idler pulley better than other videos; you made me careful not to drop the lint filter screws; I discovered that my idler pulley was also defective; and you made opening/closing the dryer body a snap!
Bill you save me a whole lot of money over the past year . I have a 30-year-old Browntop Kenmore that will not die .lol. The heating element just went out and I replaced it and the belt went out and I replaced it . Unbelievable this Kenmore that was 30 years old ran that long without an issue .I guess it's good for another 30 years LOL
Thank you Bill. My 92 year old mother is on a fixed income. Her dryer belt broke and the local companies wanted way to much money. Thanks to you I was able to order the parts off Amazon and fixed it myself. The only difference between this one and mine; mine has a small panel at the bottom of the door and the door had springs. It didn't take me long to figure out how to get the door off. Thanks again.
Bill, a million thanks for your video! When scrolling thru the videos to watch for replacing the belt, "Brown top Kenmore Dryer" and thought, that's my 27yr. old dryer! Followed your vid, step by step, and it couldn't have been easier, by myself. You saved me and my dryer!!! I appreciate it more than you know...
Thank you so much Bill. I had resigned myself to buying a new dryer, but your video made me feel like I could replace the belt on my own. The dryer is humming along again as I make this comment. Thanks again!
Thanks, Bill! You've saved me hundreds of dollars and kept my trusty old friend, my browntop Kenmore dryer, running like a champ! I replaced the belt, the timer, heater element, and various thermostats over the years and she just keeps going. Thanks again, Bill!
I hope you still read the comments on your video because this was fantastically helpful. Rather than buying a new dryer for $500 or a house call -- $100+ -- it cost me $8 for the belt, a few days wait for the part to arrive in the mail and 30 minutes of my time to put the machine back in operation. Maybe it will last another 30 years. ...
Thank you! ( years later after you made this video, I found this, and fixed the belt issue, we replaced the felt belt that goes in the back of the drum, and we didn't install the motor belt on right, and your video showed me how...thank you!
Thanks Bill! Your instructions saved me hundreds of dollars. Replacing my dryer belt cost $8.00 for the belt and little elbow grease. Cleaning out all the lint took more time than the repair. Great tutorial; everything was exactly as you described. Thanks again!!!
Hi Bill - I'm not too handy because I never really had to be. So when my Kenmore dryer belt broke and I told everyone I was going to fix it, I had many doubters (including my own mother - lol). I followed this video and nailed it with ease. Thank you so much. I subscribed to your channel and will recommend you to others in the future.
THANKS FOR THE HELP! My grandma's Kenmore 500 broke down and this was the assistance I needed. Thanks for the clear and concise instructions. Keep up the great work.
I am currently trying to get an old dryer back up and working, I have completely disassembled it and needed to know how to install the belt, this video is great in the instruction. To not to lose the screws, I found by stopping the chute with a cloth works.
Bill, thanks for your excellent video!!! My dryer stopped running and my dad suggested it could be the belt. I bought a $14 replacement from Lowe's, found your video, and it's fixed! Others may have already suggested this, and perhaps you've discovered a trick since this was posted, but i heeded your warning about the lint trap screws: i took a small bundle of work rags and tucked them into the hole while removing and inserting the screws. Elimination control! 😁 Thanks so much!!!
@BillNewberry An additional question on this same dryer: is there a way to replace or recover the cushion on the back edge of the drum? Mine has split in a few places and i would love to slip a new cover over that edge, if possible.
This morning my dryer not spinning. I think, well it's old I probably should just buy a new one. I start pricing new ones, I think, well, let's see if I can fix it, which I did for 8 bucks and the help of your video. Thank you so much!
Bill, you created a very helpful DIY video that made the job very simple. Thank you. Some others may have already offered a solution to losing the screws down the lint chute. I will offer one also. Seal the filter chute with "painters" tape before removing the screws, then remove the tape after reinstalling the screws. "Painters" tape will not mar the surface nor leave adhesive residue. No more lost screws to retrieve. Keep up the great work! Ps, yes I read the whole description, but not until after I left this comment.
Thank you! I'm not very handy but your video saved me. My heart sank when I heard the original (30-year) belt snap and thought I'd have to find a plumber to help during shelter in place. Installed the new belt tonight and just ran the first dryer load! It worked! The biggest challenge was figuring out how to disassemble/re-assemble the front panel (I have a 2 part piece). Other than that, getting the belt on was easy.
Your video saved me $150 if I had it serviced by the retail store. You explained it well and walked me through it perfectly! My wife and I owe you dinner if you are ever in the Central NY area!
Thank you. I have an old gas dryer that's more than 30 years old. It keeps on tickin' but every once in awhile it needs something new. Last time it was a heat sensor and this time the belt. Still, not bad for coming free with the house when I bought it.
My dryer belt broke last night. Love this video because this dryer is very similar to mine. Thank you for providing such a clear description of how to replace the belt.
Thank you Bill for doing this video. I have the exact same dryer with a broken belt. Your instructions were perfect. The dryer is running like a champ again! 👍🏽👍🏽👍🏽👍🏽
I do read the whole description! ☺️👍 Thank you very much for your help!!! 🤝🤝🤝 I think it'd be also helpful if you include a link to get the parts (belt in this case) and or the part number. Anyway, thank you, thank you, thank you!! 🙏🙏🙏
Thanks bill your the only video of probably 10 that I've found with the dryer I have I was so pissed until I saw this and had it fixed in 5 minutes cause you finally showed how to run the belt
It looks pretty easy thank you for doing it slowly , because being a woman and learning how to work on things myself it sure makes it easier when you take your time lol
Thanks a ton Bill . Have this 1986 brown dryer now for 3 years and belt broke off to lowes to fix and now after a day of it and no service call its fixed !! .
This video helped me find out why my dryer didn’t start.. needless to say I tested nearly everything else and studied the schematic hour and a half later I watched this video since I have a kenmore and my belt was snapped clean in half thanks man !
Thanks SO MUCH for getting the footage of you putting the belt on properly at the bottom of the drum! That's key to the whole process. I can't wait to try this for myself as soon as I buy the replacement belt.
Great video but I did call my dad with a question about the noise it was making after I changed the belt and he asked if I checked the drum rollers and the pulley so maybe you could add checking out those things as well as he belt change in one video for us ladies who want to do it ourselves so we know everything about fixing our dryers. I have a kenmore brown top it is my baby, I love it had very ten years and i don't want a new dryer so knowing everything about maintaining it would be awesome. Thanks you are my favorite you tube repairman!
Thanks for this video. The spouse and I were able to use this to replace the belt. Having two sets of hands helped. Dropped one of the front panel screws under the drum and behind the dryer screen panel. Now I keep a magnet in my tool kit. :)
Thanks for this video, which guided me thru the replacement of a broken belt. I struggled with some steps of the repair of my electric dryer that went smoothly in your video: During re--assembly, the drum seemed to sit further toward the front so that the front panel would not fit on. Also, I could not keep the drum levitated in the front and it kept slipping off the back circular ridge. Finally I tipped the dryer over on its back panel, after removing the exhaust hose. With the dryer lying on its back, I could set the drum on the back circular ridge without having to hold it in place. I discovered that the drum was sitting too far to the front and slipping off the circular ridge, because the drum was sitting against, rather than riding on, one of the guide rollers. That roller was free to slide 1 to 2 inches along its axle. During my first attempt with the dryer upright, the axle was pushed backward far enough that the drum was not riding on it, but against it. I could see all of this and correct it, when I laid the dryer on its back. I didn't return the dryer to upright position until I had reattached the front panel.
I used a piece of coat hanger type wire by bending a hook on both ends and letting the drum hang off the back frame of the dryer at just the right height.
I read the description! :D This is a great video. My son and I just took apart our dryer to recover the broken belt, which was a lot easier after watching this video featuring a dryer nearly as old as our relic. Replacement is going to be a tricky job, but at least we can see how it's supposed to go. Thanks!
I baught this very same drier today real cheep. But it did have a broken belt and or belt switch. Thank you very much i will check back in on your other videos You explain very, im very handy but it doesn't hurt. James
wow ... GREAT job on this video. 6.5 min total is good, pacing was perfect (not too slow ) and camera work perfect. ( lol ... now I will go open my dryer and see if it IS in fact the belt causing the "no spin".)
I thought your pace of instruction was very good. Not too fast, not too slow but comprehensive. No editing needed. Got my new belt and ready to give this a shot.
Thanks so much! Great video. Just had to pay for the belt. Forgot to plug the wires in of course, but was able to squeeze my hand in to connect without taking the front off again.
Thank you very much disabled vet and very happy not good with call or tablet but very happy with video im also a senior citisone im almost 66 very happy with video aint changed belt yet going to watch it a few times just so i got everything down good never looked anything on video but dont think i will have any probablems thanks again sorry for spelling but thanks very much cant afford tech to come out thanks so much tought a old dog a new trick saved me a lot think you again😂😊
Thank you so much. I used your video and I was able to fix the same dryer with my in law. But the belt that I got was alot tighter than the one from your video. Thank you for the counter clockwise rotation tips. It would've been a pain to figure that out.
thanx man. Made it super easy. they built them back then so that any one could work on them and they'd last for a long time. the only problem was my front was a 2 piece and the disassembly was difficult and the springs for the door were attached to the base. to those that have this model pop the bottom down first(pry the top out) unhook the springs from the bottom and then proceed as above.
Thanks Bill. I'm fairly handy and could probably figure it out as I go but REALlY helps me to see you do it first. I appreciate what you do here! Thanks!
well done video!!! Nice slow pace and clear voice...... I will take my dryer apart tomorrow not sure if I have a broken belt, but, this video will help me determine that......
Excellent video. Very helpful. My dryer is 30 years old, robust enough to be worth repairing. Only thing I noticed that you could have added was the correct number for the replacement belt which is 341241. I would suggest getting a belt made in US versus Chinese. My $.02
Well done my man ,much appreciated for a good video on replacing the dryer drum belt . I easily could have paid 200-300 bucks for a 15.00 dollar part way to go man.
Very clear video! You have saved us a lot of money. (We actually heard the belt snap and even went into the laundry room to see if something had fallen. LOL) PS - I do read the full description. ;-)
Exactly what I needed. My model was slightly different in that it has a two panel front. The main front panel which includes the door and a smaller lower panel which allows service just to the lower area of dryer.
@@swampcrawlerls1267 took care of it a long time ago. Prolly a week after i posted that comment. It was a 1975 kenmore dryer. Grabbed a belt off of amazon.
@@chainchompDX yah, I figured you fixed it by now since your comment was a year old. But this video was so helpful to me I just went down the comment section too. Cheers.
Thank you! I watched your video, took apart the dryer, measured the belt (93in) looked up the part number and it's listed 92 in. I realize over the years it stretched. So when putting it back together after watching your video I would have doubted myself if I had not watched the pulley and over the motor shaft part. You gave extremely clear visual on how to put everything back together. I hope 9 years after making this video you are still checking your comments 🤘🏽
Don't we wish that every DIY video could be as clear, well-shot, and concise as this one?
Thank you for the clarity if this video. You are truly a professor of youtube university!!
Thank you sooo much, you saved me. I watched other ones before I found yours and I was like WHAT..? Watched yours, went straight to it and fixed it...Yay...!
Just finished installing belt on exactly same dryer, rust and all....after watching this vid. Thanks for the refresher course.
Thanks for this! Especially the part about getting the belt around that wheel. I think our dryer is about 51 years old and we just fixed it by buying a new belt for $20.99. They don’t make them like they used too 🙃
Update: I just replaced the belt in my dryer and your video came in handy for more than one reason. You showed how to loop the belt around the idler pulley better than other videos; you made me careful not to drop the lint filter screws; I discovered that my idler pulley was also defective; and you made opening/closing the dryer body a snap!
Bill you save me a whole lot of money over the past year . I have a 30-year-old Browntop Kenmore that will not die .lol. The heating element just went out and I replaced it and the belt went out and I replaced it . Unbelievable this Kenmore that was 30 years old ran that long without an issue .I guess it's good for another 30 years LOL
How could anyone give this video a thumbs down?
This guy saved me 500 to 800 bucks.
Thank you Bill. My 92 year old mother is on a fixed income. Her dryer belt broke and the local companies wanted way to much money. Thanks to you I was able to order the parts off Amazon and fixed it myself. The only difference between this one and mine; mine has a small panel at the bottom of the door and the door had springs. It didn't take me long to figure out how to get the door off.
Thanks again.
I have 1985 Kenmore gas dryer. Still working! Best dryer ever made.
Yup... I have Kenmore washer and dryer from the late 80's... hopefully it will outlive me. I hear the new appliances don't last 10 years, if that.
Bill, a million thanks for your video! When scrolling thru the videos to watch for replacing the belt, "Brown top Kenmore Dryer" and thought, that's my 27yr. old dryer! Followed your vid, step by step, and it couldn't have been easier, by myself. You saved me and my dryer!!! I appreciate it more than you know...
Watched this and replaced the belt in a very old Kenmore, over 40 years old. Hubby and I had never done anything like this. Thanks!
Thank you so much Bill. I had resigned myself to buying a new dryer, but your video made me feel like I could replace the belt on my own. The dryer is humming along again as I make this comment. Thanks again!
Thanks, Bill! You've saved me hundreds of dollars and kept my trusty old friend, my browntop Kenmore dryer, running like a champ! I replaced the belt, the timer, heater element, and various thermostats over the years and she just keeps going. Thanks again, Bill!
A great instructional video - better than the "official" Sears Kenmore RUclips video that I just watched.
I hope you still read the comments on your video because this was fantastically helpful. Rather than buying a new dryer for $500 or a house call -- $100+ -- it cost me $8 for the belt, a few days wait for the part to arrive in the mail and 30 minutes of my time to put the machine back in operation. Maybe it will last another 30 years. ...
Thank you! ( years later after you made this video, I found this, and fixed the belt issue, we replaced the felt belt that goes in the back of the drum, and we didn't install the motor belt on right, and your video showed me how...thank you!
Thanks Bill! Your instructions saved me hundreds of dollars. Replacing my dryer belt cost $8.00 for the belt and little elbow grease. Cleaning out all the lint took more time than the repair. Great tutorial; everything was exactly as you described. Thanks again!!!
Hi Bill - I'm not too handy because I never really had to be. So when my Kenmore dryer belt broke and I told everyone I was going to fix it, I had many doubters (including my own mother - lol). I followed this video and nailed it with ease. Thank you so much. I subscribed to your channel and will recommend you to others in the future.
Excellent video cost me $21.00 to fix my 35 year old dryer. Thank you for being so easy to follow.
This video was very helpful! For the cost of a $15 belt I was able to fix my dryer! Thank you very much for posting this video! Excellent information!
THANKS FOR THE HELP! My grandma's Kenmore 500 broke down and this was the assistance I needed. Thanks for the clear and concise instructions. Keep up the great work.
I am currently trying to get an old dryer back up and working, I have completely disassembled it and needed to know how to install the belt, this video is great in the instruction. To not to lose the screws, I found by stopping the chute with a cloth works.
One of the best instructional video's I've seen! Thank you so much!!
Thought so, too. Especially on getting the belt over the idler pulley and motor shaft. Other videos leave that out.
Bill, thanks for your excellent video!!! My dryer stopped running and my dad suggested it could be the belt. I bought a $14 replacement from Lowe's, found your video, and it's fixed!
Others may have already suggested this, and perhaps you've discovered a trick since this was posted, but i heeded your warning about the lint trap screws: i took a small bundle of work rags and tucked them into the hole while removing and inserting the screws. Elimination control! 😁
Thanks so much!!!
@BillNewberry An additional question on this same dryer: is there a way to replace or recover the cushion on the back edge of the drum? Mine has split in a few places and i would love to slip a new cover over that edge, if possible.
This morning my dryer not spinning. I think, well it's old I probably should just buy a new one. I start pricing new ones, I think, well, let's see if I can fix it, which I did for 8 bucks and the help of your video.
Thank you so much!
When I looked at my non-spining Kenmore I thought there's no way there's going to be a tutorial on how to fix this. Thanks for the clear step by step.
Bill, you created a very helpful DIY video that made the job very simple. Thank you. Some others may have already offered a solution to losing the screws down the lint chute. I will offer one also. Seal the filter chute with "painters" tape before removing the screws, then remove the tape after reinstalling the screws. "Painters" tape will not mar the surface nor leave adhesive residue. No more lost screws to retrieve. Keep up the great work! Ps, yes I read the whole description, but not until after I left this comment.
Thank you! I'm not very handy but your video saved me. My heart sank when I heard the original (30-year) belt snap and thought I'd have to find a plumber to help during shelter in place. Installed the new belt tonight and just ran the first dryer load! It worked! The biggest challenge was figuring out how to disassemble/re-assemble the front panel (I have a 2 part piece). Other than that, getting the belt on was easy.
Your video saved me $150 if I had it serviced by the retail store. You explained it well and walked me through it perfectly! My wife and I owe you dinner if you are ever in the Central NY area!
Thank you. I have an old gas dryer that's more than 30 years old. It keeps on tickin' but every once in awhile it needs something new. Last time it was a heat sensor and this time the belt.
Still, not bad for coming free with the house when I bought it.
My dryer belt broke last night. Love this video because this dryer is very similar to mine. Thank you for providing such a clear description of how to replace the belt.
Thanks to your video I was able to replace my belt and idler pulley for my dryer. Now dryer worker better than before and quieter also.
Thank you Bill, your video helped me a lot. Its not only the thrill of repairing our dryer by myself, but also saving on our bill significantly.
This guy is the best! Our 1984 dryer has lived on many times because of this man’s great instructional videos!
Thank you Bill for doing this video. I have the exact same dryer with a broken belt. Your instructions were perfect. The dryer is running like a champ again! 👍🏽👍🏽👍🏽👍🏽
Your video guides me 100% through the process. I've never disceted a dryer before. Thank-you.
I do read the whole description! ☺️👍 Thank you very much for your help!!! 🤝🤝🤝
I think it'd be also helpful if you include a link to get the parts (belt in this case) and or the part number. Anyway, thank you, thank you, thank you!! 🙏🙏🙏
Thanks bill your the only video of probably 10 that I've found with the dryer I have I was so pissed until I saw this and had it fixed in 5 minutes cause you finally showed how to run the belt
It looks pretty easy thank you for doing it slowly , because being a woman and learning how to work on things myself it sure makes it easier when you take your time lol
Nice video! My belt just broke tonight and I ordered parts and was looking for how-to video, this made me feel comfortable doing it!
Thanks a ton Bill . Have this 1986 brown dryer now for 3 years and belt broke off to lowes to fix and now after a day of it and no service call its fixed !! .
This video is still helping people. Thanks.
Your a life saver for this single women on a budget! Your directions were very simple and easy to follow! Thanks so much! 🤗💙
Thanks for the fantastic step by step instructions. This fixed my 33year old Kenmore dryer. Much appreciated.
This video helped me find out why my dryer didn’t start.. needless to say I tested nearly everything else and studied the schematic hour and a half later I watched this video since I have a kenmore and my belt was snapped clean in half thanks man !
Thanks SO MUCH for getting the footage of you putting the belt on properly at the bottom of the drum! That's key to the whole process. I can't wait to try this for myself as soon as I buy the replacement belt.
Great video. Easily fixed my dryer and replaced the belt after watching this video. Thank you.
Great video but I did call my dad with a question about the noise it was making after I changed the belt and he asked if I checked the drum rollers and the pulley so maybe you could add checking out those things as well as he belt change in one video for us ladies who want to do it ourselves so we know everything about fixing our dryers. I have a kenmore brown top it is my baby, I love it had very ten years and i don't want a new dryer so knowing everything about maintaining it would be awesome. Thanks you are my favorite you tube repairman!
Thanks for this video. The spouse and I were able to use this to replace the belt. Having two sets of hands helped. Dropped one of the front panel screws under the drum and behind the dryer screen panel. Now I keep a magnet in my tool kit. :)
Thanks for this video, which guided me thru the replacement of a broken belt. I struggled with some steps of the repair of my electric dryer that went smoothly in your video: During re--assembly, the drum seemed to sit further toward the front so that the front panel would not fit on. Also, I could not keep the drum levitated in the front and it kept slipping off the back circular ridge. Finally I tipped the dryer over on its back panel, after removing the exhaust hose. With the dryer lying on its back, I could set the drum on the back circular ridge without having to hold it in place. I discovered that the drum was sitting too far to the front and slipping off the circular ridge, because the drum was sitting against, rather than riding on, one of the guide rollers. That roller was free to slide 1 to 2 inches along its axle. During my first attempt with the dryer upright, the axle was pushed backward far enough that the drum was not riding on it, but against it. I could see all of this and correct it, when I laid the dryer on its back. I didn't return the dryer to upright position until I had reattached the front panel.
I used a piece of coat hanger type wire by bending a hook on both ends and letting the drum hang off the back frame of the dryer at just the right height.
Thanks Mr. Bill. Easy to follow and visually clear instructions helped me change the belt and get the unit back in working order.
I read the description! :D This is a great video. My son and I just took apart our dryer to recover the broken belt, which was a lot easier after watching this video featuring a dryer nearly as old as our relic. Replacement is going to be a tricky job, but at least we can see how it's supposed to go. Thanks!
I baught this very same drier today real cheep. But it did have a broken belt and or belt switch.
Thank you very much i will check back in on your other videos
You explain very, im very handy but it doesn't hurt.
James
Demystified the repair process. Simple and clear. One of the best videos. Thank you.
wow ... GREAT job on this video. 6.5 min total is good, pacing was perfect (not too slow ) and
camera work perfect. ( lol ... now I will go open my dryer and see if it IS in fact the belt causing the "no spin".)
I thought your pace of instruction was very good. Not too fast, not too slow but comprehensive. No editing needed. Got my new belt and ready to give this a shot.
great vid - easy to follow, no trendy buzz-words, and it worked! thank you for a clear, well-shot, and understandable video explanation.
Your voice is calm and soothing
Thanks so much! Great video. Just had to pay for the belt. Forgot to plug the wires in of course, but was able to squeeze my hand in to connect without taking the front off again.
your video really helped me replace the belt-i was confused-but u enlightened me.. thanks again..
Thank you very much disabled vet and very happy not good with call or tablet but very happy with video im also a senior citisone im almost 66 very happy with video aint changed belt yet going to watch it a few times just so i got everything down good never looked anything on video but dont think i will have any probablems thanks again sorry for spelling but thanks very much cant afford tech to come out thanks so much tought a old dog a new trick saved me a lot think you again😂😊
Thank you so much for this video. With your help I successfully replaced my dryer belt. You are a lifesaver!
Exelent video. Never did this before but after watching this I was able to do it right the first time. Thank you sir! 😊
Now that's what I call a thoughtful explanation not to elaborate and well explained thank you!
Thank you so much. I used your video and I was able to fix the same dryer with my in law. But the belt that I got was alot tighter than the one from your video. Thank you for the counter clockwise rotation tips. It would've been a pain to figure that out.
Thanks Bill! Feeling pretty accomplished! Fixed that in less than 30 minutes. Kinda proud of myself. Thanks!
thanx man. Made it super easy. they built them back then so that any one could work on them and they'd last for a long time. the only problem was my front was a 2 piece and the disassembly was difficult and the springs for the door were attached to the base. to those that have this model pop the bottom down first(pry the top out) unhook the springs from the bottom and then proceed as above.
Thanks Bill. I'm fairly handy and could probably figure it out as I go but REALlY helps me to see you do it first. I appreciate what you do here! Thanks!
Bill, I couldn't have fixed it without you. Thanks a bunch.
well done video!!! Nice slow pace and clear voice...... I will take my dryer apart tomorrow not sure if I have a broken belt, but, this video will help me determine that......
doing my first dryer belt repair today. thanks for clearly explained tutorial.
Perfect presentation. Just replaced our belt on similar Kenmore dryer. Thank you!
This video just saved us, thank you!!!! And yes, we did drop the lint screen screws so thanks for the rebuild video too!!!
Thank you!!! Thanks to you, my dryer is FIXED! FEELS GOOD! I'm gonna pour myself a drink.
This is the best dryer I've ever had,and your video helped BTW!👍
Well done. Great content. Thank you for so carefully shooting the mildly trickier parts of this!
You are an awesome presenter. thank you for showing me this DIY trick. Thank you kindly, sir!
Excellent video. Very helpful. My dryer is 30 years old, robust enough to be worth repairing. Only thing I noticed that you could have added was the correct number for the replacement belt which is 341241. I would suggest getting a belt made in US versus Chinese. My $.02
Appreciate the info,,,,,last time I did a belt on our dryer was 25 years ago,,,,,,they last forever,,,,,great info,,,saves a lot of headache
Well done my man ,much appreciated for a good video on replacing the dryer drum belt . I easily could have paid 200-300 bucks for a 15.00 dollar part way to go man.
Yes I always read the video description and I appreciate a detailed one.
Much appreciated, I was having a heck of a time with the pulley until I watched this. Thank You!
This video was great in helping me fix my broken belt.
Great directions and fantastic filming. Everything was so easy to see and your instructions were so clear and easy to follow! Thanks for your help!
Thank you for this helpful video! Very detailed, but simple to understand! My mom and I were able to fix the belt thanks to you :)
Awesome 🎉 thankful u r the man thanks Ruben
Very clear video! You have saved us a lot of money. (We actually heard the belt snap and even went into the laundry room to see if something had fallen. LOL) PS - I do read the full description. ;-)
Thanks for the video, me and my 11 year old fixed our dryer and dodged having to pay a repair man.
Yup, this video helped give clarity and made it easy to do the fix! THANKS MUCH!
Hey Bill, Great info on replacing our dryer belt. I will continue to recommend you to my friends.
Thank you great video could you tell me if this is the right belt
I preciate this vid. Used it to replace the belt on my old Kenmore. Perfect instructions.
Very informative.i wasn't sure about belt tensioner.im still waiting for new belt. To arrive.tensioner just hooks a little bit?
Exactly what I needed. My model was slightly different in that it has a two panel front. The main front panel which includes the door and a smaller lower panel which allows service just to the lower area of dryer.
You’re a great teacher. Thanks for this video.
Nice video tutorial. Hope this is the answer to the problem my client is having.
Thanx Bill great instructions. Why not stuff a small towel down the lint trap so the screws can't fall in?
Is there any way to link a place to buy the belt? It's like looking through a piece of hay in a needlestack.
Got mine at Lowes. They had a bunch.
@@swampcrawlerls1267 took care of it a long time ago. Prolly a week after i posted that comment. It was a 1975 kenmore dryer. Grabbed a belt off of amazon.
@@chainchompDX yah, I figured you fixed it by now since your comment was a year old. But this video was so helpful to me I just went down the comment section too.
Cheers.
@@swampcrawlerls1267 Hell yeah. I'll drink to that m8.