WOW... thank you for such detailed instructions. As a single woman on Social Security I have to really minimize my spending to make $$ stretch. I was able to buy the replacement heating element for $20 on Amazon and thanks to this video I replaced it myself saving a lot of money. Also the fact that you showed how to removed the thermostat that was not screwed in was a big help.
This video demonstrates how easy it is to replace the heating element. You need to mention that there may be a temporary burning smell that is very common after you install the new one.
Thank you so much! After watching your video, I was confident cause now I knew where I was going. And when I did it, everything was like I saw in the video and at the same place. I knew what the element was looking like and I easily put it out. I went to a used pieces store and bought a piece for 40$ , I put it in place and it worked!!!! I am very proud of myself. It smelled burnt at the beginning but the guy said that it was normal because of the dust on the element. But now it's ok. So thank you so much again for this video.
I ended up replacing the heating element AND the fuse. Now for only about $80.00 in parts, I have an almost like new dryer. Thanks for making this so simple to follow.
Thank you much! I had dismantled my dryer about 7 days ago to discover a fried heating element, removed the culprit and left it out. By the time the replacement came in I pulled a bonehead and forgot the wire placement! Thanks again for the video.
WOW thanks so much for the video! Was so easy to do! Saved money and not throwing out an appliance and buying new when you don't have to is just an environmentally logical thing to do! Thank you very much.
You just saved me 125 for repair this was a piece of cake. Worse part was finding the dryer element that matches my older dryer. My part number brought me here.
Thank you so much this video. One the coils snapped in ours, and I just installed the new heating element. I have a question though. Is it disposed of differently? Or is recyclable?
I have a whirlpool cabrio dryer. Is part# 279838 a standard part #? I looked on Amazon. Keyed model # in and they showed three different part #'s. Really don't want to make the mistake of ordering the wrong part. Video is helpful and will refer to it when I change it out.
My Whirlpool model leq9508lwo only had two red wires the orange wire on the left was not present when I checked the element. Is this a problem or is this the way it is for this model?
This is a great demonstration however I’ve completed the steps and still no heat. Any other ideas? Also, the wires that connect to my thermostat slide off easily.
A few other nonfunctional parts could cause no heat, such as the thermal fuse, thermal cut off kit, cycling thermostat, hi-limit thermostat. Many of these parts can be tested with a multimeter before you go through the trouble of replacing them. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We offer free technical advice and diagnosis help, so we'll talk you through the parts you need to test.
Does the new heating element require time to break in and start heating correctly? Ran my dryer for near 10 minutes and no heat. Installed the old cracked element and there was heat.
No, it shouldn't take any time to break in. There might be a weird smell from a new element the first time or two it's used, but it should come on. There may be a problem with the new element, or maybe something happened during installation. Give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/ and we'll help you figure it out.
My thermostat is part no 3390291. It doesnt have that tab and the wire is not orange. There is one red one and the other is red with a white stripe. I got the replacement and it says that you need a jumper. Can you help me
If the only thing that didn't show continuity was the terminal on the bottom (bottom right red wire) attached to a white piece, what would I replace? How would I know if it is the heating element? I've seen other videos that only replaced the high limit thermostat.
We'd be happy to help talk you through diagnosing your appliance. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We’re here to help 7 days a week.
+mrjroc318 You can go to our website and enter your appliance model number to view the parts breakdowns to see how the dryer comers apart and to be sure you get the correct part for your model.
Could this be the issue if the dryer won't cool down? Meaning it always blows out hot air regardless of the temp setting and even comes out hot on the "no heat" setting. Our dryer has been doing this for a while and at the end of a cycle the clothes are burning hot as well as the whole unit outside- feels hot. The timer works fine. We have a 3 yr old electric Whirlpool dryer. I think I read somewhere that sometimes the heating element can be shorted to ground? Whatever that means, lol. Your help is much appreciated!
+Diana Fisher It could be the element or maybe a thermostat. You can take the wires off the element and test it for continuity. If it is shorted to ground or failed you will not have continuity. If it is shorted to ground you may see the element is broken and is touching the element casing. Without knowing what you have, I would suggest posting the problem along with the appliance model number on our repair forum and the techs can help you troubleshoot the problem. forum.appliancepartspros.com/
I got a new heating element and did the replacement like you showed and still no heat.Sorry I wasted 31 dollars on a new heating element.Time for me to get a new dryer next week.
Without knowing what you have, I would suggest posting the problem along with the appliance model number on our repair forum and the techs can help you troubleshoot the problem. forum.appliancepartspros.com/
I just replaced my my HE in my Admiral dryer and the heating element exploded. I didn’t cross and wires or plug them in wrong because I marked them. When I plugged it in all was well. It was when I turned the knob did it explode. I didn’t press start
Wow, that's no good! Did you purchase the part from us? Because we do have a 365 day warranty. Even if you didn't, you can still get in touch with us, because we offer free technical advice and diagnosis. We'll help figure out whether something went wrong during the repair, whether it was the wrong part for the model, or whether there was a different problem with the machine that caused both the old and new elements to fail, and how to make sure the dryer is up and running again as soon as possible. We’re available 7 days a week at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/
@UCdVDqel5tiNliN_1F_BX0mQ I have an older model Kenmore elite (whirlpool version) electric dryer. Model is WP3387747 . I bought the heating element but every dryer video I watch shows a separate aluminum panel on the back that comes off easily. My model is white all the way around. After removing all the screws on the back the panel won't budge as if it is spot welded on. There is absolutely no give at all. Any ideas on how to get the back off on one like this?
Might just be a ground, but hard to tell here! You can post your appliance model number along with your question on our repair forum and our techs can help you out.
DO NOT RECONNECT YOUR 220V POWER CORD TO THE BACK OF THE DRYER THIS WAY!!!! IT IS A FIRE HAZARD!!!! ALWAYS USE THE RELIEF CLAMP TO MAKE SURE THERE IS NOT METAL RUBBING THE POWER CORD. OVER TIME DRYER WILL SHAKE AND RUB THROUGH THE WIRE CASING AND CAUSE A SHORT. The hole right under that panel is where the power cord is supposed to feed through.
Good video, I only watched the first half. One suggestion: always prefer power tools over hand tools. If it is possible to use a power tool, use it. In this case a power screwdriver could have been used, much better and faster than the hand tool. I have found that even small increases of efficiency make a big difference in getting jobs done.
You may get a burning smell at first but that should go away. If it continues, check the installation of the part and check to make sure you don't have a lot of lint build up inside the unit and the vent.
Without knowing what you have, I would suggest posting the problem along with the appliance model number on our repair forum and the techs can help you troubleshoot the problem. forum.appliancepartspros.com/
@UCdVDqel5tiNliN_1F_BX0mQ I have an older model Kenmore elite (whirlpool version) electric dryer. Model is WP3387747 . I bought the heating element but every dryer video I watch shows a separate aluminum panel on the back that comes off easily. My model is white all the way around. After removing all the screws on the back the panel won't budge as if it is spot welded on. There is absolutely no give at all. Any ideas on how to get the back off on one like this?
I have an older model Kenmore elite (whirlpool version) electric dryer. Model is WP3387747 . I bought the heating element but every dryer video I watch shows a separate aluminum panel on the back that comes off easily. My model is white all the way around. After removing all the screws on the back the panel won't budge as if it is spot welded on. There is absolutely no give at all. Any ideas on how to get the back off on one like this?
I have an older model Kenmore elite (whirlpool version) electric dryer. Model is WP3387747 . I bought the heating element but every dryer video I watch shows a separate aluminum panel on the back that comes off easily. My model is white all the way around. After removing all the screws on the back the panel won't budge as if it is spot welded on. There is absolutely no give at all. Any ideas on how to get the back off on one like this?
I have an older model Kenmore elite (whirlpool version) electric dryer. Model is WP3387747 . I bought the heating element but every dryer video I watch shows a separate aluminum panel on the back that comes off easily. My model is white all the way around. After removing all the screws on the back the panel won't budge as if it is spot welded on. There is absolutely no give at all. Any ideas on how to get the back off on one like this?
WOW... thank you for such detailed instructions. As a single woman on Social Security I have to really minimize my spending to make $$ stretch. I was able to buy the replacement heating element for $20 on Amazon and thanks to this video I replaced it myself saving a lot of money. Also the fact that you showed how to removed the thermostat that was not screwed in was a big help.
Seems like the $20 Heating Elements from Amazon don't last long. Have you had any issues?
Thank you for not glossing over the removal and putting back. I searched a long time to find a video that would show this. You rock! Thank you again!
I watched 7 other videos on this!!
This is seriously the only one that showed how to remove a thermostat that is not bolted down!
THANK YOU SO MUCH 👍🏼
This is why I love RUclips, years later this is still revelant. $40 for new element & boom wife is happy again! Thank you!
Thank you for these videos.. my husband and I fixed it and we saved $. We replaced the heating element. Feels great to DIY and save.
You are welcome! Glad you were able to fix your issue! If there is anything we can help you with in the future please let us know.
$35.99 element off amazon and this awesome video, it was so easy! Thank you for your clear and thorough instructions!! Very much appreciated!!!
I agree! Very thorough video. I just ordered my dryer heating element from Amazon also at that price.
@@lrp2337 LFORBB
You paid HOW MUCH? Wow. $17.99 WM.
Thank you! My daughter & I replaced the heating element in about 20 minutes with these easy to follow instructions.
Excellent job. If you only knew what an accomplishment it was for ME to complete this repair...
Thanks! This video is very easy to follow the instructions are very clear and I was able to repeat steps with no problems with my own repair.
WOW! It's that simple? I want to tackle the job RIGHT NOW!
This video demonstrates how easy it is to replace the heating element. You need to mention that there may be a temporary burning smell that is very common after you install the new one.
You're correct - the first time or two after installation, there is a burning smell.
Thankkk you!! I was getting freaking scared! Lol wondering what did I do? 😅😅
No need to be scared babygirl daddy's here
Good call on the burning smell. I just replaced mines and smelt the burning smell right as I was reading your comment.
Thank you. I was freaked right out by the initial smell
Thx, you made my repair super easy step by step, took 10 mins. Never replaced a element before
Glad to help!
I just replaced our heating element. WOW! Your video was great! An exact match to what we have. Thanks so much.
+Jerry Biggart Awesome, glad the video helped you out!
This was very helpful and made replacing the heating element quite easy. Thank you!
super useful! I replaced mine and saved $200 on a repair bill, and didn't electrocute myself!
Glad we could help!
Like the way you explain very patiently & the close up pics are great! Thank you
+Marsha Pollack Glad the video helped you get the element changed!
This took me 20 minutes! Thank you so much for this!
Thank you so much! After watching your video, I was confident cause now I knew where I was going. And when I did it, everything was like I saw in the video and at the same place. I knew what the element was looking like and I easily put it out. I went to a used pieces store and bought a piece for 40$ , I put it in place and it worked!!!! I am very proud of myself. It smelled burnt at the beginning but the guy said that it was normal because of the dust on the element. But now it's ok. So thank you so much again for this video.
We're glad we could help you out with your repair!
just changed out my heating element by following this video. Thank you so much!
+Emily Rich Glad the video helped you get the dryer up and running!
You were the first to show exactly how to replace the thermostat!
I ended up replacing the heating element AND the fuse. Now for only about $80.00 in parts, I have an almost like new dryer. Thanks for making this so simple to follow.
i hooked everything on the heating element right but the dryer is still not getting hot. any idea what that could be
Thank you much! I had dismantled my dryer about 7 days ago to discover a fried heating element, removed the culprit and left it out. By the time the replacement came in I pulled a bonehead and forgot the wire placement! Thanks again for the video.
Nick Em Glad the video helped you get the dryer fixed!
Thank you! Saved me so much money!
Thank you for a great video! Now I can do this!!! Thank you! 😊
Great video. Followed the steps and the dryer now works. Thank you!
Oh yea your a great American too for posting this video and helping us poor working folks, thanks so much again.
"your a great American"
"You're a great person"
There, I fg fixed it.
WOW thanks so much for the video! Was so easy to do! Saved money and not throwing out an appliance and buying new when you don't have to is just an environmentally logical thing to do!
Thank you very much.
We're glad we could help you save it!
Great video, very easy to follow. And definitely saved me a couple hundred dollars. 💯
thanks - very clear discussion - easy to understand, simple and inclusive
Glad to help!
This is great ‼️ I'll be bringing that stuff in next week sometime. 👍🏻 Thanks again.
Thank you for showing me a simple way instead of buying a new dryer
Simple and precise instructions... Thanks for a good video.
You're welcome!
Thank you for this easy demonstration!
Thanks for the video. I replaced the heating element and it worked great!
Darstout Glad the video helped you get the dryer fixed!
Well done. Pretty simple to follow, thanks for the video.
You're welcome! Glad we could help you with your repair.
You just saved me 125 for repair this was a piece of cake. Worse part was finding the dryer element that matches my older dryer. My part number brought me here.
Thank you for speedy shipping. Happy customer here! :)
+Pikapinky5 Thanks for the order, glad the video helped you get the dryer fixed!
what a great video! 5 out of 5 stars for your posted video.
Thank you this video helped tremendously
You're welcome!
Thank you so much this video. One the coils snapped in ours, and I just installed the new heating element. I have a question though. Is it disposed of differently? Or is recyclable?
What a great video. Awesome job. Thanks
You're welcome!
Thanks for the vid very helpful 🤘🏽🤘🏽
Great job Matt !
Thank you, this was very helpful.
+Kay Brant Glad the video helped you get the dryer fixed!
I have a whirlpool cabrio dryer. Is part# 279838 a standard part #? I looked on Amazon. Keyed model # in and they showed three different part #'s. Really don't want to make the mistake of ordering the wrong part. Video is helpful and will refer to it when I change it out.
Do gas dryer have this heating element ?
I got a Kenmore 400 series gas dryer.
Excellent, excellent video.
Its great help and thanks a lot!!!
You're welcome!
My Whirlpool model leq9508lwo only had two red wires the orange wire on the left was not present when I checked the element. Is this a problem or is this the way it is for this model?
Where can I find more of the ceramic spacers between the coils. Bought a new elements and 4 of the spacers broke in less than 3 months.
Thanks so much!!!!
Thanks
Good video. But I would think you should test the dryer before you put the back panel on.
I don’t have a separate housing. Any suggestions?
I have replaced heating element, dryer is still not heating. Should I replace the thermostat? What else could be the problem?
Is it normal for it to smoke after changing the element?
My thermostat came with the elbow type adapter but it’s not affixed to the thermostat itself. So it’s not one part ...any ideas on what’s upitat?
This is a great demonstration however I’ve completed the steps and still no heat. Any other ideas?
Also, the wires that connect to my thermostat slide off easily.
A few other nonfunctional parts could cause no heat, such as the thermal fuse, thermal cut off kit, cycling thermostat, hi-limit thermostat. Many of these parts can be tested with a multimeter before you go through the trouble of replacing them. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We offer free technical advice and diagnosis help, so we'll talk you through the parts you need to test.
using the same thermostat again wont cause the same problems?
Is this for kitchen aid dryer
Does the new heating element require time to break in and start heating correctly? Ran my dryer for near 10 minutes and no heat. Installed the old cracked element and there was heat.
No, it shouldn't take any time to break in. There might be a weird smell from a new element the first time or two it's used, but it should come on. There may be a problem with the new element, or maybe something happened during installation. Give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/ and we'll help you figure it out.
My thermostat is part no 3390291. It doesnt have that tab and the wire is not orange. There is one red one and the other is red with a white stripe. I got the replacement and it says that you need a jumper. Can you help me
If the only thing that didn't show continuity was the terminal on the bottom (bottom right red wire) attached to a white piece, what would I replace? How would I know if it is the heating element? I've seen other videos that only replaced the high limit thermostat.
We'd be happy to help talk you through diagnosing your appliance. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We’re here to help 7 days a week.
I have an older Whirlpool dryer. I noticed that the heating element housing is tack welded shut with no screws. How can this be removed?
+mrjroc318 You can go to our website and enter your appliance model number to view the parts breakdowns to see how the dryer comers apart and to be sure you get the correct part for your model.
Ok...thanks.
welldone work............
Thanks. Glad we could help!
Could this be the issue if the dryer won't cool down? Meaning it always blows out hot air regardless of the temp setting and even comes out hot on the "no heat" setting. Our dryer has been doing this for a while and at the end of a cycle the clothes are burning hot as well as the whole unit outside- feels hot. The timer works fine. We have a 3 yr old electric Whirlpool dryer. I think I read somewhere that sometimes the heating element can be shorted to ground? Whatever that means, lol. Your help is much appreciated!
+Diana Fisher It could be the element or maybe a thermostat. You can take the wires off the element and test it for continuity. If it is shorted to ground or failed you will not have continuity. If it is shorted to ground you may see the element is broken and is touching the element casing. Without knowing what you have, I would suggest posting the problem along with the appliance model number on our repair forum and the techs can help you troubleshoot the problem. forum.appliancepartspros.com/
I got a new heating element and did the replacement like you showed and still no heat.Sorry I wasted 31 dollars on a new heating element.Time for me to get a new dryer next week.
Without knowing what you have, I would suggest posting the problem along with the appliance model number on our repair forum and the techs can help you troubleshoot the problem. forum.appliancepartspros.com/
I just replaced my my HE in my Admiral dryer and the heating element exploded. I didn’t cross and wires or plug them in wrong because I marked them.
When I plugged it in all was well. It was when I turned the knob did it explode. I didn’t press start
Wow, that's no good! Did you purchase the part from us? Because we do have a 365 day warranty. Even if you didn't, you can still get in touch with us, because we offer free technical advice and diagnosis. We'll help figure out whether something went wrong during the repair, whether it was the wrong part for the model, or whether there was a different problem with the machine that caused both the old and new elements to fail, and how to make sure the dryer is up and running again as soon as possible. We’re available 7 days a week at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/
My heating element only had two wires connected to it does that make sense?
Mines is like that too
Replaced same to wires t new one.
Currently replaced mind and knocked power off in my house. How do you get yours to work?
Hmm, I can already tell that this video will be super helpful but the bottom piece in mine only has 1 wire going into it. Arg!
What if my Maytag dryer does have one of the Orange wires.
What model number is your dryer?
My part doesnt have bolts to take it off its just on there
@UCdVDqel5tiNliN_1F_BX0mQ
@UCdVDqel5tiNliN_1F_BX0mQ
I have an older model Kenmore elite (whirlpool version) electric dryer. Model is WP3387747 . I bought the heating element but every dryer video I watch shows a separate aluminum panel on the back that comes off easily. My model is white all the way around. After removing all the screws on the back the panel won't budge as if it is spot welded on. There is absolutely no give at all. Any ideas on how to get the back off on one like this?
This is so helpful. Why are you wearing gloves to replace it? Is that necessary?
I would recommend work gloves because those metal edges can be pretty sharp.
What if you do this and it still doesn’t heat?
What is the model number of your dryer? Have you recently had a power outage? Do you happen to have a multimeter?
hELP hELp ! ! ! Won't heat on a full settin (timer) When i set the timer with 10minute left it heats
I only have 2 wires connected to my element instead of 3... but theres a 3rd prong but nothing plug to it..Can anyone help
Might just be a ground, but hard to tell here! You can post your appliance model number along with your question on our repair forum and our techs can help you out.
@@appliancepartspros I have 3 wires but only 2 pronges plug in where does the 3rd one go.
What did y’all end up doing? Just replaced mines and see only have two wires as well
@@jeremyallen3845 just used the 2 wires, 3rd prong I just left alone... been working fine
DO NOT RECONNECT YOUR 220V POWER CORD TO THE BACK OF THE DRYER THIS WAY!!!! IT IS A FIRE HAZARD!!!! ALWAYS USE THE RELIEF CLAMP TO MAKE SURE THERE IS NOT METAL RUBBING THE POWER CORD. OVER TIME DRYER WILL SHAKE AND RUB THROUGH THE WIRE CASING AND CAUSE A SHORT. The hole right under that panel is where the power cord is supposed to feed through.
This is coming from professional appliance parts salespeople.
Good video, I only watched the first half. One suggestion: always prefer power tools over hand tools. If it is possible to use a power tool, use it. In this case a power screwdriver could have been used, much better and faster than the hand tool. I have found that even small increases of efficiency make a big difference in getting jobs done.
Why do you have to take the old thermostat and put it on the new one, shouldn't the new heating element come with a thermostat
This element is sold without them. If yours are bad you would have to buy them separate.
Thanks I replaced the hearing element by myself
Awesome, glad you got the dryer fixed up!
Anyone else get a burning smell after replacing heating element?
You may get a burning smell at first but that should go away. If it continues, check the installation of the part and check to make sure you don't have a lot of lint build up inside the unit and the vent.
@@appliancepartspros thanks for the reply, it went away pretty quickly. Just worried about worst case scenario, the house burning down!
And ppl wanna charge you 200 including service charge...
i changed it now it don't even start-_-
Without knowing what you have, I would suggest posting the problem along with the appliance model number on our repair forum and the techs can help you troubleshoot the problem. forum.appliancepartspros.com/
Sorry not paying $7.50 for a repair video.. so stop it please
L
@UCdVDqel5tiNliN_1F_BX0mQ
@UCdVDqel5tiNliN_1F_BX0mQ
I have an older model Kenmore elite (whirlpool version) electric dryer. Model is WP3387747 . I bought the heating element but every dryer video I watch shows a separate aluminum panel on the back that comes off easily. My model is white all the way around. After removing all the screws on the back the panel won't budge as if it is spot welded on. There is absolutely no give at all. Any ideas on how to get the back off on one like this?
@UCdVDqel5tiNliN_1F_BX0mQ
@UCdVDqel5tiNliN_1F_BX0mQ
@
I have an older model Kenmore elite (whirlpool version) electric dryer. Model is WP3387747 . I bought the heating element but every dryer video I watch shows a separate aluminum panel on the back that comes off easily. My model is white all the way around. After removing all the screws on the back the panel won't budge as if it is spot welded on. There is absolutely no give at all. Any ideas on how to get the back off on one like this?
@UCdVDqel5tiNliN_1F_BX0mQ
@UCdVDqel5tiNliN_1F_BX0mQ
@
I have an older model Kenmore elite (whirlpool version) electric dryer. Model is WP3387747 . I bought the heating element but every dryer video I watch shows a separate aluminum panel on the back that comes off easily. My model is white all the way around. After removing all the screws on the back the panel won't budge as if it is spot welded on. There is absolutely no give at all. Any ideas on how to get the back off on one like this?
@UCdVDqel5tiNliN_1F_BX0mQ
@UCdVDqel5tiNliN_1F_BX0mQ
@
I have an older model Kenmore elite (whirlpool version) electric dryer. Model is WP3387747 . I bought the heating element but every dryer video I watch shows a separate aluminum panel on the back that comes off easily. My model is white all the way around. After removing all the screws on the back the panel won't budge as if it is spot welded on. There is absolutely no give at all. Any ideas on how to get the back off on one like this?