Double Glazing Fix: Seals, Glass, Leaks & Replacing - Conservatory Renovation

Поделиться
HTML-код
  • Опубликовано: 26 июн 2024
  • How to renovate or fix upvc windows in a conservatory (or house). This video deals with typical things that go wrong or cause problems and how to fix them, like:
    00:00 Intro
    00:46 1) Rubber Seal Shrinkage - Gaps
    00:59 2) Water in the Frame
    01:38 3) New Rubber seals from eBay
    01:54 4) Black Stains from Rubber UV Ageing
    02:30 5) Replace the Glass or Repair? or Make single glazed?
    04:34 6) Measuring up for New DGU (double glazed unit)
    08:13 7) The Order of Fitting Rubber Seals
    10:17 8) Why did the DGU blow?
    13:40 9) Leaks Through Screws.
    14:35 10) Single Glazed conversion
    18:58 11) Water Penetration Sill & Walls
    I replaced 4 double glazed glass units, changed all the rubber seals and converted 8 smaller windows to single glass pains in this conservatory. Converting from double to single pain glass pains is cost free and some may say unprofessional but for me the extra thermal insulation from double glazing on these small windows had no value, since the room got too hot in the summer when I forgot to open windows.
    I bought the 4 new double glazed window panes online from buyglass.co for just over £300 with delivery and vat. (Feb 2024). Good service from them. I have no association with them and have had no payments or discounts for stating this. There are lots of local and other online suppliers, so search around.
    So here are most of the other parts I used, from Amazon or eBay at the best prices and availability as I write this. Using these links will not cost you any more than going there without using these, but it does earn me some few coins.
    As an Amazon and eBay Associate, I earn from qualifying purchases.
    Rubber (EPDM) window seals :
    Amazon UK: amzn.to/3IhCkD1
    eBay UK: ebay.us/FsKj3N
    eBay USA: ebay.us/w2PkAw
    Rubber Mallet:
    Amazon UK: amzn.to/3ThyBLT
    Amazon USA & other countries: amzn.to/3P3sBnt
    Flat bladed jointing / filling knife (2 or 3”) - used to get the trim off:
    Amazon UK: amzn.to/3OZQ2xW
    Amazon USA & other countries: amzn.to/3uVhZQQ
    Subscribe to the channel for similar DIY, fixing stuff, car bits and tech reviews here:
    ruclips.net/user/subscribe_widg...
    Note, if you want to be notified of new videos click on the bell symbol on my home page.
    See other videos on my channel here:
    / comeinhandynow
    Lots of playlists on different DIY subjects, with hundreds of videos that I have done here: www.youtube.com/@comeinhandyn...
    If anyone wants to show appreciation for any money savings, or just help support the channel and future videos then you now can. Use this link:
    paypal.me/comeinhandy
    OR you can support me by using the Amazon and Ebay links to buy other stuff that you would usually buy, it will not cost you anything more.
    e.g. Generally useful DIY stuff:
    Face mask:
    Amazon UK: amzn.to/2GHE9d6
    Similar ones on Amazon USA & others: amzn.to/2IHmip1
    Eye goggles: Amazon UK: amzn.to/2IUSqos
    Amazon USA & others: amzn.to/2GAtIXJ
    Rubber disposible gloves are also useful, here's the links for:
    eBay USA: ebay.us/GGqmTJ
    eBay UK: ebay.us/cE1BHK
    Amazon UK: amzn.to/3aikbl8
    Amazon USA & other countries: amzn.to/3cdwjpD
    A set of screwdrivers:
    Amazon UK: amzn.to/3TjgpBG
    Amazon USA & others: amzn.to/49YxI0p
    I’m on Facebook here: / comeinhandynow
    The video is about my personal opinion and experience and contains no paid for product placements. No responsibility is accepted for any perceived recommendation for or against a product or feature nor any consequential damage or harm since this video is just my personal experience. You accept by watching this video that you accept any responsibility for any subsequent actions or decisions that you take.
    Note on copyright / licensing: This video was created using Apple iMovie and as such any music or video content is fully licensed by their terms and conditions for free publication and distribution.
    See the Apple iMovie software license agreement at:
    images.apple.com/legal/sla/doc...
    Which states "all Sample Content included in the Apple Software may be used on a royalty-free basis in your own video projects"
  • ХоббиХобби

Комментарии • 7

  • @neilthorpe3914
    @neilthorpe3914 3 месяца назад

    My window beads come off from the outside, I'm never sure about the security. Good information thanks .

    • @comeinhandynow
      @comeinhandynow  3 месяца назад +1

      Thanks for watching! Security is a bit weaker but it’s still a bit of a job to remove the window as on my externally beaded windows the inside has adhesive foam tape.

  • @ericastier1646
    @ericastier1646 28 дней назад +1

    Sorry you showed removal of the seals (beads) with a rubber mallet and a spatula around to get to the glass unit and you said that to reinstall them their rubber ridges would not pop into place in the frame grooves easily, that you have to put them back first before re-installing the glass and that there would be enough gap to slide the glass over them. Forgive my incredulity but that sounds not easy to do at all. Could you reassure that step and give further guidance.

    • @comeinhandynow
      @comeinhandynow  28 дней назад +1

      That is a good point and for many years I thought like you are thinking that the reassembling order should be the same as disassembly..However after years of seeing the bead move out later all over the place, I realised that the reason and putting the bead in first is the solution and it works. Give the window a push into the frame to help compress the rubber. It works and the outer bead stays in place!

    • @ericastier1646
      @ericastier1646 28 дней назад +1

      @@comeinhandynow thank you, it was worth asking and you gave the confident answer i was hoping for.

  • @sekliw147
    @sekliw147 24 дня назад

    Hi, i wonder if you could help pls? I took this small first unit out of oir conservatory. Stripped it down, cleaned glass throughly and used clear mastic to seal before gaffa taping all around. I struggled to get all the beading back in, but it misted up AGAIN within hours! Where did i go wrong pls? Tks v much. John

    • @comeinhandynow
      @comeinhandynow  24 дня назад

      The desiccant inside the spacer bar is saturated with water, you would have to dry it out in an oven, replace it (messy as they are fine beads inside the spacer) or replace the spacer (difficult to get hold of small volumes). You also try putting the old spacer inside a very small room with a dehumidifier on max for a day or two.