I did not understand anything you did as I am dead drunk. But dude I really appreciate the hard work you did put in as I myself did it once to get a rd400 chasis ready. Way to go with the Youngs modulus of your chassis. All the best from India 🇮🇳 🇮🇳 🇮🇳
Hi, can yo please make a video showing the plans with all dimensions an angles?, I want to get in karting but I can buy one so maybe I can build it, thanks
About the two bendings on the pipe of the front end where the spindles mount, is the bending so that the front tires level with the rear tires/rear axle? I heard that karts are designed that way to prevent flipping over while on turns or is just to level the front and rear end? Nice work thank you.
Hey Dude , looks fantastic , you made a uniq vehicle. I see that you have already created 3D of the frame , I would like to ask you that is there any possibility to get the 3D from you to adjust in my workshop , I can send you pictures after all :) ,
Congratulations my brother. beautiful project.Would it be possible to send me the project with the measurements for me to try to do here in Brazil? Grateful in advance!
Hi , I found your build page while searching for go-kart plans or if you have any suggestions where to find any i'm looking to build a kart for my grandson. Thanks
There’s a slim Chance you’ll see this but can you release the plans and measurements for the frame if you still have the, cause I’m trying to make my own
Where did you buy the steel tubing and what welder are you using? I've been trying to find a supplier of steel tubing but the only place I can find it is at places like home depot where the only sell select sizes and it is extremely over priced.
I’m currently in the process of building a 125cc shifter kart for my senior project. I got 20ft long 1.25in OD, 1in ID tubing for $33 from a local metal place. (Type “metal place” into google maps and one should be relatively close)
Please could you give the map with the measurements.
Wow. You should be really proud of your work. Well done.
Hi there.. can you please tell me where I can find this plan?
Great video.. and thank you for NOT using a million jump cuts like many do every three words!
Very nice job young man.
I did not understand anything you did as I am dead drunk. But dude I really appreciate the hard work you did put in as I myself did it once to get a rd400 chasis ready. Way to go with the Youngs modulus of your chassis. All the best from India 🇮🇳 🇮🇳 🇮🇳
With the steering I would think about finding some ball baring that would work for less friction
Hi, can yo please make a video showing the plans with all dimensions an angles?, I want to get in karting but I can buy one so maybe I can build it, thanks
He had the autocad files for this build in his previous video in this series
@@kobek5272 idk what you exactly mean but I aim trying to get ahold of those same measurement papers on building one.
Love this video cant wait to see it fully done
ruclips.net/video/Lc-PJQkOQq8/видео.html
About the two bendings on the pipe of the front end where the spindles mount, is the bending so that the front tires level with the rear tires/rear axle? I heard that karts are designed that way to prevent flipping over while on turns or is just to level the front and rear end? Nice work thank you.
How much feet of tubing did you buy?
Hey Dude , looks fantastic , you made a uniq vehicle. I see that you have already created 3D of the frame , I would like to ask you that is there any possibility to get the 3D from you to adjust in my workshop , I can send you pictures after all :) ,
Can’t wait for part3
ruclips.net/video/Lc-PJQkOQq8/видео.html
Well done!
awesome! I just found your channel yesterday and was hoping for a part 2 of this one soon LOL
ruclips.net/video/Lc-PJQkOQq8/видео.html
Where do you get your tubing from?
He mentions it in Part 1
What’s the type tubing you’re using?
Looks like conduit tubing
he talks about it in part 1
question how thick are the side walls of the tubes ? 2mm, 3mm,4mm etc
Congratulations my brother. beautiful project.Would it be possible to send me the project with the measurements for me to try to do here in Brazil? Grateful in advance!
Ik this vid is old but did you have any problems with warping wend welding
Awsome great job!
Hi ,
I found your build page while searching for go-kart plans or if you have any suggestions where to find any i'm looking to build a kart for my grandson. Thanks
Where did you get the blueprints? That’s awesome.
Could you use pie cuts instead of a tube bender
how did you find the camber, caster angle
Are you doing MIG welding?
Did you use 1” tube or 1 1/4” ? Awesome build !!
How much tubing do I need to buy to build this frame? Would really help if you can reply to this :) awesome video btw!!
Can you put the sizing and measurements of the tubes please
what are the mesurements can you please tell me
what do i have to do to get one made !!!
how thick is the tubing?
Which tube size do you use?
why was the kin pin already at 20 degrees?
Is there any was i can buy the blueprints off of you I’m very interested
Can i have the measurements to this build? I bought a mig welder kinda wanna have some fun
Would this pass the FIA Karting spec inspection for competition karting?
I suppose no but if you dial it to 11 i guess no one gonna know it's a homebree race kart
I wonder if I could just get all of those tubes from old bikes
Do you have the plans?
Possible geometry??
What’s up man. Anyway you could take pictures of those blue prints and send em to me? I’ve been really interested in building one recently
Hello, i am Chilean. I Need make the support for cut tube (1:36)
You Can tell me how?
Did you design this?
Which Material are you using for chasis ...
1 1/4" Carbon steel tubing
What size tubing ?
There’s a slim Chance you’ll see this but can you release the plans and measurements for the frame if you still have the, cause I’m trying to make my own
I think they are in the description of the first part
@@D11amee i looked at thoes and the 3d files have no measurements of the angles
when is the turbo honda coming back? are we going to get dyno numbers?
where we can take measurements?
Ive seen popular people use a harbor freight manual pipe bender just fine
As far as the video shows lol
ruclips.net/video/Lc-PJQkOQq8/видео.html
Hey what are the outer diameter and wall thickness's of the tubes you're using?
1-1/4 .083
is that arc?
Do you sale plans?
Extreme Replica?
Can i buy those plans?
Hola, soy de chile, posibilidad de acceder al plano de ese go karts
Nice work a true craftsman would you be willing to sale the drawing for you build
Badass
Aye I see you wearing Lafayette college I don’t stay far from there we need get together and do some riding with a few ppl on karts
thanks
Hey dude can u send me the plans for your kart
Please could you give me the measurement on this go kart
I doubt you’ll see this but I’ll be passing by your area tomorrow. I’d love to meet up and take some pics or something. I have a sunlight silver rx8.
What is the background song?
Ikr
Would love to know the tubing type and bending tool.
carbon steel 1-1/4 inch tube 14 gauge bent with a protools bender and die. All info given in my part 1 of this series
Would carbon steel hold up the flex when cornering ?
Where did you buy the steel tubing and what welder are you using? I've been trying to find a supplier of steel tubing but the only place I can find it is at places like home depot where the only sell select sizes and it is extremely over priced.
I’m currently in the process of building a 125cc shifter kart for my senior project. I got 20ft long 1.25in OD, 1in ID tubing for $33 from a local metal place. (Type “metal place” into google maps and one should be relatively close)
as said in part 1, it is from the Pennsylvania steel company. frame is made of carbon steel round tube 1-1/4 .083 wall, Welder is a hobart handler 140
i need onee!!
Will you made for me a Frame please
Just wondering if you could send my the diagram for this build
Thank you.
im a 6 foot tall about 200 lbs and using a 450 bmw motor do you think this frame will work for me?
Christian Garcia yes just make sure the welds are proper
where is the third part of the go kart building?
bro are you serious?
@@PeterArmour yes I was. Why are you asking? It was uploaded 2 hours ago and I wrote my question a day ago.
can we get the dimensions pls??
I would spend more time and money trying to get that done then I would spend buying one.
Can you sell me your plans I have a personal project?
The volume of the music makes it impossible to watch on a smart tv
Does your dad know you’re using his tools?
ruclips.net/video/Lc-PJQkOQq8/видео.html
It's confirmed I'm an idiot
99.00%
Could have been great without that Crappy HipHop Gansta crap
what tube sizing did you use?
Hi what size and type tubing did you use?
How long is the axel?
Does your dad know you’re using his tools?
not sure what your culture is, but here in America, 20 year old people can make money too
Peter Armour No shit, I guarantee those are still his dads tools.
Peter Armour Here in central Florida we know what the fucks up.
@@wiawii considering that is me, I can assure you they are not my fathers tools. They are in fact mine.
Peter Armour Sure buddy. Try again