Nice car I am looking into getting one myself. What are your model recommendations? Also is your car stock height w body kit, or did you lower it a bit?
If you care about performance get the 2.0 and tune immediately. Intake downpipe and stage 3 tune. Then work on the small parts like intercooler and turbo
Where did you jack it up cause I’ve never seen a jack point where it was in the video? Just the jack stand points and the one behind the engine along with in the rear near the trunk?
@@JDUB2580RUclips yeah I’ve been using the exposed pinch weld right next to the jack stand point but was unsure of overstressing the thin metal there🤷♂️ just felt like I was the only one and doing it wrong
Thanks for sharing. Do you have a video of the install for the black front lip @8:49 you installed? Also, how is the overall fitment and quality so far? TIA
@@JDUB2580RUclips just bought the car a month ago..but from what i remember the whole headlight assembly (low beam and high beam )goes lit up whenever its on "auto" and "on"
@@JDUB2580RUclips just downloaded the owners manual..the car didn't come with it..just noticed that last week. Yes..i need to pull the lever for 30 seconds or so to turn it on, will try that later.
@stevemarty6229 if anything it add width yo the base so in theory it handles a little bit better. But not noticeable if you want better handling get better tires, wider wheels, coil-overs, then alignment arms like camber and toe
@@JDUB2580RUclips exactly how I thought about the situation. Thank you for the help. I haven’t talked to anyone with them. I wasn’t sure if it was more of a look thing rather than handling. I got the 1.5t base with like 17 x 7.5 so it’s shot. Soo i definitely need bigger wheels. But I wanted to try it first since it looked sick. U think 9” wheels will fit without rubbing ?
@@JDUB2580RUclips i heard do alignment after you add them, i did lowering springs and got alignment done so im just gunna run the spacers and wish for the best😂
@@JDUB2580RUclipswait so ur telling me that this didn’t increase performance when taking turns?? I literally just as going to buy becuz it “helps” with handling,,, i was told
I may go with this route once I buy my D2 springs on my 2.0T. Cheap alternative for now
Exactly. Looks good for cheap
Much better!!
Nice car I am looking into getting one myself. What are your model recommendations? Also is your car stock height w body kit, or did you lower it a bit?
If you care about performance get the 2.0 and tune immediately. Intake downpipe and stage 3 tune. Then work on the small parts like intercooler and turbo
@JDUB2580RUclips what's cost of downpipe and tune? No issues passing smog right
Where did you jack it up cause I’ve never seen a jack point where it was in the video? Just the jack stand points and the one behind the engine along with in the rear near the trunk?
Honestly not sure I use the points where the pinch weld is exposed
@@JDUB2580RUclips yeah I’ve been using the exposed pinch weld right next to the jack stand point but was unsure of overstressing the thin metal there🤷♂️ just felt like I was the only one and doing it wrong
6 months passed after installation. Do you have any problems in nowadays with wheel spacers ?
No nothing yet still the same as when I put them on!!
I know I’m late to this video. But how did the spacers hold up? No problems to be looking out for?
Thanks for sharing. Do you have a video of the install for the black front lip @8:49 you installed? Also, how is the overall fitment and quality so far? TIA
Unfortunately no I threw it on really quick
love it
Hey brother..could you show your headlights operation..please.
I did a video on high beams if that helps
@@JDUB2580RUclips just bought the car a month ago..but from what i remember the whole headlight assembly (low beam and high beam )goes lit up whenever its on "auto" and "on"
If you see a little symbol with a “A” in the light your auto high beams are on you pull the stock towards you to turn it on and off
@@JDUB2580RUclips just downloaded the owners manual..the car didn't come with it..just noticed that last week. Yes..i need to pull the lever for 30 seconds or so to turn it on, will try that later.
Did you take off the hub ring?
Wont the tires hit your arc now when going over a pot hole?
I never rubbed and I also don’t hit potholes intentionally
This may be a dumb question but adding spacers doesn't mess up the alignment right?
No but it wouldn't hurt to get one if you notice anything
@@JDUB2580RUclips aight thanks
did you have to cut the lug nut shorter because i saw that some people have to cut it shorter if the lug nut is too long
If you go shorter than 50MM you will have too that’s why I went with these
@@JDUB2580RUclipsI think you meant to say 25mm
Does it drive different?
No not in my opinion
@@JDUB2580RUclips handling is no different? Not any better?
@stevemarty6229 if anything it add width yo the base so in theory it handles a little bit better. But not noticeable if you want better handling get better tires, wider wheels, coil-overs, then alignment arms like camber and toe
@@JDUB2580RUclips exactly how I thought about the situation. Thank you for the help. I haven’t talked to anyone with them. I wasn’t sure if it was more of a look thing rather than handling. I got the 1.5t base with like 17 x 7.5 so it’s shot. Soo i definitely need bigger wheels. But I wanted to try it first since it looked sick. U think 9” wheels will fit without rubbing ?
It comes with set of four or each one is 200 $ ‘ ?
Set of 4
Need alignment after putting spacers on?
Probably but I never did
@@JDUB2580RUclips i heard do alignment after you add them, i did lowering springs and got alignment done so im just gunna run the spacers and wish for the best😂
Just put some washers
What size tires were you running here?
245/40/19
@@JDUB2580RUclips do the tires look like they're wearing in evenly?
Does it fit for 2022 accord 2.0 t bro.?
10th gen for sure possibly 11th
What size are those
25mm /1''
Do they make any noise ???
No
What size wheel spacer did you get 20mm or 25mm spacers?
@seamandemon19 25mm
@@JDUB2580RUclips did you keep the regular lugs with the wheel locks or did you have to change?
Kept the OEM lugs
How much did the set of 4 cost?
~ $250
What size did you get?
1 inch
You notice any difference in mpg with this particular mod?
None feel and drives the same just looks a whole lot better
@@JDUB2580RUclipswait so ur telling me that this didn’t increase performance when taking turns?? I literally just as going to buy becuz it “helps” with handling,,, i was told
Was this stock suspension?
Yes
What size spacers ?
25mm ~ 1 inch
Shoot the link for the spacers fam
www.ebay.com/itm/313617446478
@@JDUB2580RUclips good looking 🫡
will this fit with my accord 2022?
Yes it will all tenth generations with sport wheels at least