The Launch of Flipsky 75100&75200 Pro V2.0 with Alu. PCB
HTML-код
- Опубликовано: 15 сен 2024
- Hello, guys!
Today, I will introduce the launching of FSESC 75100 pro V2.0 and FSESC 75200 pro V2.0.
75100 pro V2.0: tinyurl.com/4v...
75200 pro V2.0: tinyurl.com/yv...
Please check them out.
Both of these ESCs' updates are as follows:
1. Built with phase filter
2. Designed with power on/off switch
3. Integrated in Bluetooth Module
4. The latest firmware: 6.02 (firmware update supported )
00:08' The appearance of both ESCs
00:12' The wiring diagram of both ESCs
00:17' The upgrades of both ESCs
00:22' How to do parameter settings
Follow Us On Social Media, thanks!
/ flipsky_tech
/ flipskytech
#flipsky
#vesc
#escs
#diyesk8
#flipskytech
Привет Отличный продукт Наконетсто !!!!
Thanks for your support.
75100 pro v2
100A is Phase or Battery current?
Nice , now just add a imu like the bmi160 and we're golden
Thanks for your support.
This does not tell me the real function of the phase filters and what does that change?
With phase filter, the real data will be more accurate.
So happy you guys finally made the key loop. Now why no 3 speed or dash signal wire???
Do you mean the servo PPM wire?
@@FlipskyTech I don't know what that means. I would sell flip sky but you guys don't have three speed.
@@Razorcrew_Cole The escs based on vesc are built without speed level limit and controlled the speed via throttle gear. Our new none vescs support different speed levels.
@@FlipskyTech Yeah but can we plug in a three-speed switch?? I'm trying to get Jordan Davis and Jeremy Madox to get you guys to do it. I will be reaching out soon and trying to start working with you guys if you can do that. I begged and begged for that key/volt meter
@@Razorcrew_Cole For this esc based on vesc, our engineers haven't tested successfully for 3 speed levels throttle bar. The new non-vesc escs are workable for different speed levels throttle
Nice with bt programing that's good hope it can be disconnected for hacking reasons lol. Might try to mod it to a Bafang bbs02b or bbshd
You can turn on pairing done in vesc and it won't connect to any new BT devices anymore.
It's sounds great.
@@FlipskyTechI sure hope it sounds, not great 😂 like silence 🤐 😂
and what phase filter do?
Hello, sir. There's no need to turn off the phase filter when you are doing parameter settings.
@@FlipskyTechVous n avez Pas répondu à la question !! 😅
@@jonathangueguen3352 🥰
it will kill your 75100 V1 if you turn it on!
@@jonathangueguen3352 The pro V2.0 version escs have built with phase filter, so no need to turn off the phase filter. Other versions without phase filters need to turn off the phase filter. Thank you.
Можете делать , Вещи Молодцы
Thanks for your support.