Видео

The battery is 13s.

Rinse with fresh water after each use to reduce corrosion

The setting parameter is per motor. After inputting one motor, switch to another motor and input data again.

@@FlipskyTech Ah good to hear, also have you sorted out the capacitor issue where they were loose and came apart? Saw another video from months back so asking, thanks

If your motor is brushless then it can be used with this controller.

After setting the corresponding data, it can be displayed on tftdispaly through UARE. However, this display only accepts VESC and FOCBOX

What remote controller do you use?

@@FlipskyTech Обычный велосипед курок газа простой велосипедный

Колесо редукторное

​@@teist111 This video is about setting ADC control with cruise mode, you can refer to it: ruclips.net/video/6QgsopBVO8I/видео.html

This is the latest motor, and there is no plan to make it into underwater propellers currently. But If there is a demand we can also accept mass customization.

@@FlipskyTech The people need a motor to be efficiency about 4000-4500W and give thrust over 60kilos for surf board to get speed over 30kph , did you have this motor?

​@@xenofonlive The motor 85165 can satisfy.

@@FlipskyTech I saw a video on youtube with the motor 85165 it use SUP board on normal motor rate 3000W gets about 18Kph! this is very far from the goal.

@@xenofonlive The 85165 can reach 30km/h. This is related to ESC, battery, or setting parameters. If you want to use high speed, can match with 75200/75450/75300/75350.

60V/3000W is 38.5KG

@@FlipskyTech if i use battery 12s lipo 22AH the normal voltage is 44.4 X 68A =3000W i have lower efficiency? lower thrust with the same Watts?and if yes how it is about?

@@xenofonlive If you want to achieve higher efficiency and thrust, you need to use Flipsky NON-VESC or FSESC 75200. Under the same environmental conditions, efficiency and thrust are similar. However, efficiency and thrust will vary depending on the environment.

@@FlipskyTech Yes i know efficiency and thrust are similar. How much better efficiency have the NON-VESC?

Do you mean you want 84V but can only use 72V?

Please provide a video of the problem to this email address, it will help us find the cause. fs_service@flipsky.net

The max current is the battery current, and 75A is the maximum protection current for the motor if over this current will easily damage the motor.

@@FlipskyTech ok so what’s your max settings forr foiling with 46,2V battery (11S) with 75100 FSESC PRO V2 and 6374 motor ? Motor current : Absolute max current : Battery current (11S2P) :

@@Nitro552 The maximum battery current isn't over 70A. The motor current can be set to 60A first, and then adjusted to the required current based on the battery current output. The absolute value can be set to 220A.

@@FlipskyTech great 👍 thank you so much !

We do not recommend using such a high battery, as this exceeds the specification range and may easily damage the ESC.

Due to different serial port protocols, this ESC can't be used with other displays.

Our official website has detailed graphic instructions, you can click this link to view：flipsky.net/collections/remote/products/flipsky-remote-vx1

Yes, this ESC can be used with ninebot, but Incompatible display. BMS is mainly for battery protection and does not affect the use of ESC.

It can work underwater but it can't be built with Jetpack suit.

@@FlipskyTech have you motor that can built for underwater Jetpack?

​@@trailerqu3464 Plz send the picture of what kind of underwater Jetpack you produce. e-mail: fs_promotion@flipsky.net

That is a good idea!!

When we launch this product, we will announce relevant information. Pls follow our social media account, thanks.

The video mainly shows the basic details of the product. The laboratory we test in is as realistic as possible. We also test outdoors, which is essential. We will try to show this part later. Thank you for your suggestion.

We tested it many times, and the motor mount is suitable for high-power motors. They were driving well.

Thanks for your support SO MUCH.

The official website will have occasional discount activities, and we will publish them on social platforms, you can follow us. Also, you can contact our website sales, thank you.

There is a link to 65150 in the details, where you can learn more details. If you need the motor 65150 with guard, you can check this link: tinyurl.com/ms6w5tn8

This motor can provide a lot of power and it can also be used on boats。

There is no impact between the regeneration function and the cruise function.

This ESC doesn't switch functions. If you want to use a key switch you can try to use 75100 pro v2.0 tinyurl.com/59wsr2es

hahaha, the lightning board can support strong power and high speed.

Thanks so much, bro

That is a good choice you can try it that will be a lot of fun.🙌

Yes, this motor is indeed powerful. But it is a good choice for some advanced riders, provided that safety measures are taken. Yes, safety is important.😎

This motor is a larger power, we recommend using FSESC 75450/75350/75300, as they can support high voltage and current.

What about this mounting: tinyurl.com/422jwdhe If you want the mount pls private message the official website backend

@@FlipskyTech Ok thanks, but i just need the one covering the back of the motor and the top part as i mount it on my rudder.

The battery is 62(22.2v)

The lightning board is not waterproof

Yes, it is powerful enough for Efoil.

@@FlipskyTechwhat is the max thrust with the folding prop?

@@Djosua12 The thrust is 28.5kg

When using voltage is 48V and current is100A the thrust is 49.4KG