Tutorial for Using FT85BS V2.0 for E-Scooter

[@aladkoi]

Greetings. The power switch has three wires: battery+, ground and signal. When you press the button, is there a short circuit to +battery? And is it possible to enable cruise on this controller?

[@XSAILOR65]

Thanks. What is the advantage on this over Flipsky 75100?

[@FlipskyTech]

This one can run higher current, more powerful and available for horn, front & rear lights.

[@AydinAdn]

can you run two of these in parallel from a single throttle?also what type of performance gain could i expect to see from using this over a generic bldc controller?

[@FlipskyTech]

Yes. Two single escs are able to be combined and build 2WD. At present, FOC only and not available for BLDC.

[@3ABXO300]

Will field weakening be added in an update?

[@JeffersonRodriguezHurtado]

Can it be used with vesc tool?

[@FlipskyTech]

No, this ESC needs to use Flipsky ESC Tool, which you can download from the manual.

[@JeffersonRodriguezHurtado]

The engine is not very good, very poor, how can I improve, use hall

[@FlipskyTech]

@@JeffersonRodriguezHurtado, pls specify the problem with why the engine is not good and what you want to improve. Pls send this email: [e-mail], thx

[@XSAILOR65]

Can be connected to USB port on PC?

[@FlipskyTech]

Yes. It's programmable via our EST TOOL by connecting the USB with PC.

[@boardinrider]

is there a no hardware limit mode for this esc?

[@FlipskyTech]

Hello, sir. Thanks for your message. There isn't a "no hardware limit mode" for this esc.

[@1HandyLad]

​@@FlipskyTechIs there a utility I can download and install for Windows or Mac? Is the utility compatible with other FlipSky ESC models?

[@FlipskyTech]

@@1HandyLad Hello, sir. Thanks for your message.
For VESC, you can use the VESC tool.
For FSESC, you can download the flipsky_esc_tool from this link: tinyurl.com/mrx7nssk