Tacking, Spraying and gun set up
HTML-код
- Опубликовано: 7 фев 2025
- www.motivatedpainters.com
Watch some white pearl tips here!
• White Pearls & MORE! m...
INSTAGRAM: / motivatedpainters
MOTIVATED PAINTERS AS IS WOULDN'T BE POSSIBLE WITHOUT www.buddscolli... which is where I have worked for a decade now!
RUclips CHANNEL: www.youtube.co...
SNAPCHT: gabriel.merino / gabriel.merino
LINKEDIN: / gabriel-merino-70488384
TWITTER: ga...
Thanks for the gun setup tip. I have seen others try to explain this and it was not as simple and straightforward as your technique. I tried it this morning. It works well. Your gun setup is by far the easiest and best method.
Awesome glad I could help
Thank you Gabe, for showing the whole process. Your advice is appreciated as always. Awesome paint job from an awesome painter!
Thanks !!!!🤪
Good afternoon Gabe, that turned out real nice. I have finally gotten a pretty good source and supply of microfiber towels. I use them once in the spray booth and then they go out in the shop to be used for shop rags. I will have to try one of those basecoat guns that you suggested. I have just learned of the spray source for these guns. Thanks for another great video. You take care.
Awesome !!!😁😁 I will have 3 for sale soon with motivated painters logo social edition! They will be $750usd in your hands and it will come with a free blower and walcom didgital gauge! It's over $1000 worth !
Absolutely killing job my friend
Thank you my brother I appreciate you beeing here
Hey gabe....
Everytime i watch your videos i think i worke in the stoneage... 😮
No antistaticgun no pps ore rps .... no "revolver mixsystem"....a s o ...
I think i get old.... 😎
Nice video and work👍
Keep on painting 😉
Back at it again I see gabe, welcome back to reality. How much pressure (psi)do you have coming out of the wall.
Nice jobs same like always
As for the hardener and reducer
U use 75 or u use 85 and why and reason thanks gab
STYLIN!!! it gabe love ye buddy been doing pdr tooooo long miss my bay time bigtime!!! stay-rad!
Haha 😁
My two favorite painters in one video! Awesome. Btw, is there an aerosol can version of spray mask available anywhere? Would be really handy for those of us who occasionally paint in our garage.
Ok question about gun set up , your fluid is set to full out for the most part , when you spray do you squeeze full trigger and just move faster to compensate the amount of clear coming out or do you partial squeeze to a certain point from experience. Most who try this will run that clear off the panel with full fluid flow and squeezing full trigger . On my gun I set up to 3 turns out from all the way in and full squeeze-stops at the same place every time , now I’m learning so I’m just asking as a novice painter
Yeah I full trigger which is why I always mention look at what the gun is doing and adjust accordingly move closer, furthers, faster slower you know
MOTIVATED PAINTERS so for a production painter moving faster is more efficient and time is money , I may try the full open and adjust my speed and distance . My arm get tired moving so slow sometimes when spraying a lot
Hello. Question about the tacking what about sand pile in between coats what would you do then? how long would you use the same Micro fiber towel? Machine wash and used again?
Yes you can use it for up to a week if your jobs are clean when you out the in the booth direction of paint gun will almost eliminate most sand pile
Thank you ... I will be trying tomorrow
Awesome video buddy u can cocktail ppg 3000 and 4000 works great also just putting it out their that ppg has other products u can cocktail
padilla81005 dc 3000 and dc4000?
Yes dc3000 and dc4000 sorry
Great that’s what we spray right now ... I’m having trouble with solvent pop what’s your flash times and bake time and temp please
Factory Finish with 3 and 4000 they are back to back clears zero flash time I use hi temp Hardner usually dch3098 sometimes 95 I don’t bake sorry it’s usually out the both with with a half hour no need in my case
Hi Gabe. Love your videos 👍. What is the advantage of trizact 1000 over the traditional 1000 discs and interface pad? I didn't even know they made such a thing. Thanks
It's softer so you can't mistakenly scretch with edges but the traditional ones sand better
Whats the masking you use besides the paper i take it just washes off. cheers
Gabe i just finish painting a truck but the clear coat is not drying i totally forget if i put a hardener on..its 5pm now so have to wait till monday if i will get shit woth the owner..
Oh no man!! Hopefully it dries !
@@MOTIVATEDPAINTERS gabe it actually dries out like a normal spray can 1k clearcoat..but its not hard ad the normal clear like 2k and still tacky..so i just put another coat of clear with the hardener..and it turns out good..just sharing my experience..in a busy shop specially if u are doing lot of stuff..it happens that u will forget something...so hopelly the informatikn i shraed will help
The ws400 supernova is a awesome clear gun I use a 1.3 tip , you mentioned in another video that you were trying the 1.4 tip and liked it.Have you gone back to 1.3 or are you still using the 1.4 tip? Great video keep them coming .
Hey I went back to using the 1.3 I get beat results with it !
I dig the paint suit were and who makes it?
I designed it and making it myself! You can grab one at motivatedpainters.com 🤪😍
How good does it work using a microfiber cloth for grease and wax and how often do you replace and how do you clean just curious
Look at my previews videos on micro fiber it works really well
Where do you get micro fiber ??? Do you wash them first the towels ???
Yes wash them first Costco
@@MOTIVATEDPAINTERS air dry or slow dry in dryer???
Doesn't matter
Real pro.
Gabe is using dead eye with his clearcoat gamers will know what i am talking about 😂😂😉
How do you mask gas cap back mask ???
my friend, why are you using a carbon filter on your belt when you're on the wall?
Because it came with the mask and I can never be to sure haha
What do you feel the advantage of not tacing versus us a MF towel is? Doesnt leave any residue from the tac cloth?
Could be that and also you don't create more static from rubbing the car and also distorting the mettalics
Hi Gabriel on bigger jobs would you not tack off in between coats for like sand piling or would you do nothing now and just blow off with the stat gun?
Cheers Wes
If there is a panel that I haven't based at all the you can track it and the stat gun
How much are those blowers
Hey brother they are $57 motivatedpainters.com
Where can I buy that blower?
Motivatedpainters.com I sell them !!! Go check it out !
😍😍😍😍😍
How many turn the fan? 2or3?
2
What tip you used bro
1?3
Don't you cover the other side of the car?
The car has spray mask
Thats cool, not seen it before..... Will have to look into trying it.
Ws-400 is 1.3 HD o 1.4mm HD?
1.3
@@MOTIVATEDPAINTERS
1.4mm HD That's fine too?
Yeah
Hello. What kind of masking paper is that? Also, what are your preferred guns for base and clear. Sorry if this has already been answered.
It's a local brand here I don't remember the bame, walcom hte base for base and ws400 clear
That's a glass bro
Haha thanks !!!
Armour All silicone, 🤣🤣🤣
Love your work but....masking not good you should cover the whole car not just half, I do it and every youtube channel who is about spraying also do it....good job!
8:12
Lol thanks brother a lot of people don't care to listen or even think that maybe he is not a butcher and would care enough to protect the car haha
Spray mask
Lol.....you have to tell people that you use spray mask a lot on here Gabe. I would think that common sense would come in to play at some point. And people would have to realize you’re not gonna just mask part of the vehicle. I mean, you are, in my opinion, one of the top painters in our industry.
Haha thanks man!!! I would think so too but some people have genuinely never heard of it hahahaha
U have a nice partner