Adjustable router jig for square holes or recesses
HTML-код
- Опубликовано: 12 ноя 2019
- Hello friends
I made a simple router jig.
It can be adjusted according to what you want to fit.
It is also possible to process non-right angle shapes.
Jig plan convenient for woodworking
jisaku-koubou.com/downloads/r...
[Plan List]
jsk-koubou.stores.jp/
You must also watch this video to use this jig.
• Router Subbase & Cente... Хобби
If you find any unauthorized reproduction of the JSK-koubou video, please report it to me.
Thank you.
JSK-koubouビデオの無断複製を見つけた場合は、報告していただけると助かります。
Excellent DIY jig - Great design 👍
JSKさんはアイディアの宝庫で、このジグも他の海外の方々が製作されている物を見てもやはり一番です。作り方がシンプルで加工方法も素人向きで且つスライド調整及び締め付け方法が楽に出来ます。又、繰り返しの加工部分は省いてあります。特に海外の動画の時間は長いのでスキップしながら見ていますがこのJSKさんのyoutubeを見ている方々は理解されて居る方々ばかりだと思います。お迎えが近く成った爺じいですがファンの一人です。どの動画を見てもジグの精度は高く評価しています。本当に素晴らしいです。
A bottle of Jack as a counterweight! Man, you're a genius! :D
By far the best DIY channel I ever encounter. Thank you!
The most simple, straightforward and effective adjustable jig I've seen, many thanks!
I don't think I will ever understand why videos like this get downvoted. Personally I prefer dialogue to further explain what is going on but his videos are crystal clear with no language barrier. Another great video.
Simple, yet ingenious! It is so enjoyable watching these useful tools being created. Thank you so much!
Clever, simple and effective! Loved it!
Me encantan tus proyectos y la limpieza como los haces gracias maestro x tus enseñansas no dejes de seguirnos iluminando con tus videos
Nice work!! Thanks for sharing =)
Absolutely briliant! I need this level of preciseness. Many thanks from Czech Republic.
Your videos always inspire me! I went with Hardboard (HDF) and 2020 t-slot extrusions. It's given me a great deal more adaptability with being able to mount things to the sides, and to screw the hardboard onto the t-slot extrusion, from underneath. I made a 8-way version as well, with a few pieces, and can now do octagons.
Its way better than the others diy routing templates because you actually see the shape. Simply genius !
I like when creators continually use their own created tools to make stuff
Good job
Atticus Draco have you checked out Paoson woodworking?
@@cw4608
Yes, most certainly have
He caught my attention with an adjustable chuck a couple years back
:)
You always find a way to make jigs and tools completely accurate without a lot of unnecessary frills that waste time and money. You obviously put a lot of thought and experience into every project. Please keep on sharing your projects. Thanks so much!
Thank you.
I am distributing jigs that can be used safely as videos.
Please share the video with your friends!
Really fantastic idea, dude! Beautiful job! 😃
What an easy jig to make and the result is a PERFECT fit. Once again, you sir are the master.
Not that easy. I am making it right now if you dont have the right hardware you need a lot of extra steps.
@@PatchworxStudios yeah... like the thing at 5:16 ??? What's it called... I've been looking online for days. I just thought "Slotted bracket" but that put me into a rabbit hole.
Yes i made those Parts myself from some 3mm Aluminim. The Problem is that you need an absolute perfectly concentrical base... i mean absolute. If not this Thing will selfdestruct.
@@PatchworxStudios lol I just bought 20 of them on Misumi... I finally found them, and they seem to be the only premade version in existence (I assume @JSK-KOUBOU got them at Misumi as well.)
They are called Auxiliary Brackets if I can remember. (My brain is mush after the constant searching.)
@@carterscustomrods xD Nice that you finaly found them. I have seen them on some furniture but its still a non standart piece. I altered the designe to fit my local resources and my scrap bin xD. How are the results? Mine works well enough but like statet above needs a rebuild because i simply could not center the damn routerplate. I first need to rebuild the router circlecuting jig then the baseplate then recut the jig to make it perfect...xD.
ありがとうございます。シンプルで最高です。半年前位からRouterを使い始めてまだ初心者なのでこれは大きな助けになります。
Bravo, brilliant, gorgeous!!!
Very good jig, simple and accurate! Congratulations, good job!
The best homemade rectangular hole milling tool I 've seen!
I love the practicality of the designs and the quite unhurried peacefulness of the videos.
Absolutely brilliant Sir. Thanks for sharing this.
Watching you work is ZEN.
I love this channel because besides making incredible tools, the protagonist is always the wood, all very clean and visible. Impressive.
He IS the wood?
I like what you do ❤️
とても便利です!本当にありがとうございます!
A brilliant build, so useful, thanks for posting from Garry in the UK
Brilliant !!!simple jig and like the way you have demonstrated the making of this 👌thank you
more simple and effective impossible, thanks you so much
Some people do more talking than anything. This guy is the total opposite. Absolutely fantastic. Action speaks louder than words.
louder and clearer 😊👍
Fantastic Videos! Learn something new for each one I view. Very useful products. Thank you.
РЕАЛЬНАЯ ВЕЩЬ,ПРОСТО ГЕНИАЛЬНО! ЛАЙК
Thank you so much for the amazing knowledge you share with us! God Bless!
Great video and perfect build!
One question: for the cut to be precise, you have to use always the same bit?
Thank you for sharing!
Superb, simple but so accurate and usable, well done and thanx
Nice one, good construction, i love it, greetings Piet from Holland !
Просто и Гениально!!! Снимаю шляпу!!!!!
Thanks for sharing this design. Gotta say mine worked OK, but I really struggled to get a clean recess with it. My Makita router has a big knob sticking out at the base, which meant I had to keep rotating the router to avoid it hitting the rails, and I kept dipping the router into the recess accidentally. It's a wired router, too, so that compounds the problem of trying to rotate it 360˚ in a small rectangle. I also had some issues clamping it down...if one side was too tight the MDF boards wouldn't stay level with each other and I'd get another hiccup when moving between boards. Had a heck of a time getting the right parts in the UK, as well, and I didn't get the exact ones...nothing common fits comfortably in those t-rails; they don't seem to make nuts that fit snuggly and that would have helped (I think they do for the larger t-rails). I'm looking at other jigs for future projects that work better with my router.
Muito bom seu projeto, parabéns.
Wow, simple but great. Well done.
DE LO MEJOR Y SENCILLO QUE HE VISTO GRACIAS POR COMPARTIR TUS CONOCIMIENTOS HERES UN AUTÉNTICO MAESTRO ME DA GUSTO VER Y ADMIRAR TU MAESTRIA
Perfect your job! Congratulations! I will try to reproduce something on a smaller scale for use with Dremel with the 335 accessory! Thanks for the amazing DIY videos on your channel!
Simply PERFECT !!!
Шаблон festool курит в сторонке. Просто и гениально! Спасибо!
Шикарно!
Только где взять профиль?
Не понял, зачем такие длинные соединительные планки, выступающие на 5 см. Видимо, какие-то стандартные. Профиль вчера купил, вот эти планки как делать?
@@хтось_04 С 10-той минуты становиться понятно зачем. Формат "карманов" в принципе не ограничен. Я так понимаю, что при достаточной "нужности" можно добавить и больше направляющих для создания многоугольников.
Там они не нужны. Присмотритесь: достаточно соединительной пластины с тремя отверстиями.
Seems that I have t rethink my approach to making jigs. Thank you for the inspiration, you have me deepest admirations.
very simple to use, just like to know where you got your fittings.Great to see a tradesman at work well done have already started making mine and looking at more of your projects thank you for sharing
But anyway I like to express my highest compliments for your plans and projects, Well done!!
Parabéns pelo belo trabalho. E gostei da garrafa de Whisky como contra peso. Sou de Salvador/Bahia-Brasil e fã do canal.
Congratulations for the beautiful work. And I liked the bottle of whiskey as a counterweight. I am from Salvador / Bahia-Brazil and a fan of the channel.
I love everything you make JSK-koubou,thank you
You have a lot of great ideas. I love your videos.
Thanks for sharing
Wooooow! Great jig and, as always, superb instruction and video production 👍👍👍👍
Super man. Just what I was looking for. I'll make this over the weekend
очень познавательно,спасибо.Удачи.
Thank you for sharing this part, it is very helpful, for which I thank you very much.
Brilliant.The best one on YT by far.Thanks for sharing.
Полный восторг! Пошел искать такие направляющие.
Very useful and easy to build... thx for sharing 👍🏽
Gracias por el aporte y vídeo, excelente trabajo.....
Yet another simple but smart jig. I have some extra t-track that I may see if I can use to make one of these. Nice idea. 👍🏻
Это лучшее приспособление этого рода из того,что я видел на RUclips. Автору 5+++ ! Особенно учитывая его себестоимость по сравнению с Festool(около 300$) !
gracias por compartir sus conocimientos, esta genial esta plantilla
I love it. ✌😁
Hey you can put a tape measure on the sides.
If you need a 4 by 4 cm plate, you can adjust it exactly. 📏
Great stuff. Always interesting videos.
アイディアもさることながら、仕上げの良さと見栄えの良いのにはいつも感心させられます。ところでよく使われている電動ドリルのスタンドが欲しいのですが、氏素性を教えてください。(自作なのか購入品なのか)宜しくお願いします。
Good afternoon, I am always watching your videos, besides the impeccable works, your working environment is great, I would like to know about adjustable jig for router, the thickness of the mdf used, the width, and if possible the length, I know that too depends on my use, it's just a parameter. I would also like to know if it works using the column router?
Simple and smart, good job, keep the videos comming
Damn! You are awesome. 👍 thanks 🙏
A picture paint a thousand words great job
Ingenious...greetings from India.
ぴったりハマると
きもちいですねー
Awesome!!!!! Many thanks!
Super Arbeit
Dankeschön fürs Zeigen
Nice jig, thanks !
Very creative and great idea. Nice job and thanks for sharing!
Absolutely brilliant
Great job thats awesome, any issues with just the double sided tape on track?
Excellent I thort of this In my mind last year but didn't act on it. Your jig is brilliant 👏👏👏👌👌👌👍
Absolutely amazing. Nice Work :)
Impressive !!! Thank you for sharing.
Perfection as always JSK-koubou. I’m not sure if you read these comments but. On some of your videos you have a layout parts list with dimensions onscreen, the more recent ones, can you revisit this one and add them please?
Perfect jig . Brazil , Beni
Perfect! I am going to build this! Thank you! Your designs are always simple and elegant.
INTELLIGENTE E INTERESSANTE IDEA.
SALUTI
SALVIO
Merci pour la vidéo.... Difficile de faire plus simple efficace et peu onéreux...bravo
complimenti. Bella realizzazione
Я в восторге от фантазий этого мастера! Смотрю все его видео. Он просто мастер с большой буквы! Очень щипитильный, очень качественно все делает.👍
Genius . good job
Complimenti sei sempre in gamba . Super
This is some epic unintentional ASMR... A++
Nice work MASTER, thanks.
Another simple idea well executed. What do you call the metal brackets that connect the t- track ?
Thankyou
Did anyone find it out?
@@rafaelbezerra8048 I'm looking for them but nothing...have you found them?
@@rafaelbezerra8048 you find the item at aliexpress: universal right angle connector for furniture bracket
@@enricozucca2813 you find the item at aliexpress: universal right angle connector for furniture bracket
Vey clever idea.Nice work .Congratulations
Просто и легко. Браво автору
I like the counterweight on your vertical track saw.
... Servus, sehr saubere akkurate Arbeit👍Grüße aus Deutschland
あなたの動画は大変参考になりました。ありがとうございます‼️
Perfection !!! Bob
9:44 how you would fix bottom right corner, since you have over cut it with chisel or other way ?
Perfect !