Thank you boss seen other videos of them taking pcv out a lot more work this was so simple thank you I got a all white lly from AZ ship to IN I will be following now
Was curious how you delete after putting the new LLY Engine Turbo Mouthpiece, Inlet Manifold Intake Elbow But mine on and after taking the old one off that broke out Don't think it does anything but what jonk in the Turbo is curious how you delete it
Thanks! They were on the truck when we bought it, but they appear to be the ones sold by Topgear Autosport “GMC Sierra 2500HD 2003-2006 White Towing Mirrors LED Lights”.
Do you think it makes more power or just flows better and is more efficient? I did some turbo inlets on my truck and I peak notice boost comes on at 2200-2300rpm now.
I have ? I Just in installed the same mouth piece on 05 lly and i smashed the wire connector under it. Didnt notice it until i had to reinstall clamp on one side! What im wondering what wire is to?
Somebody convinced me to buy s&b "brand name product" is an outright piece of junk! $195 for a piece of poorly - YES, POORLY - cast of aluminum alloy is ridiculous. This thing is all rough inside so it's YOUR responsibility to sand it to the acceptable condition. The picture on their site shows polished shiny hose surface while in reality, even cast ribs are carefully preserved. I seriously doubt Chinese stuff for a fraction of the price is any worse. CONCLUSION: They sent me a replacement that has been machined but it's still kind of rough inside. I am not good at upgrades - never had anything to do with detroit - but I was under impression that smooth surface makes a difference...
There is a link in the description to purchase this product. I gained 4+psi of boost from this part alone on tune 3 of 5.
Great video! Nice truck! My LLY also benefited from a 3" hot side intercooler pipe......LML drivers side exhaust manifold flows better as well. 🙂
Thanks, and yes those are definitely good mods to do as well.
Small little upgrade for a big difference , Awesome brendon 🙌🏽
Thanks! It gained 4psi of boost and I didn’t get to full throttle. I saw 30psi after this mod!
Thank you boss seen other videos of them taking pcv out a lot more work this was so simple thank you I got a all white lly from AZ ship to IN I will be following now
You’re welcome
Nice video man! Definitely helped a lot noticing the difference before purchasing the mouthpiece👍🏽
Thank you! It is definitely nice when you can get a good gain for cheap and not much work.
Great video bro!
Thank you!
Sounds great!
Thanks! I’m kinda hooked on that turbo diesel sound.
Nice! I did turbo inlets on my 2.7 ecoboost. I see peak boost at 2300rpm. Vs 3500rpm. Throttle response is improved like you described as well.
I saw 30psi today!
Was curious how you delete after putting the new LLY Engine Turbo Mouthpiece, Inlet Manifold Intake Elbow But mine on and after taking the old one off that broke out Don't think it does anything but what jonk in the Turbo is curious how you delete it
Are you talking about the PCV system? Or something else?
Nice video! Can I ask what type of mirrors you have? I hate mine.
Thanks! They were on the truck when we bought it, but they appear to be the ones sold by Topgear Autosport “GMC Sierra 2500HD 2003-2006 White Towing Mirrors LED Lights”.
Will this fit the lbz? I seen even the S&B brand supports 2004.5-2005? I have an 06.
As far as I know, this only fits the LLY. LBZ already has a good turbo inlet.
@@whiplashtv2022 awe darn, I know the LBZ has a good one but was looking to ditch the rubber/plastic look more or less. Thanks for the response
@@aaronledesma6214 you’re welcome
Thank you very much
You’re welcome
Do you think it makes more power or just flows better and is more efficient? I did some turbo inlets on my truck and I peak notice boost comes on at 2200-2300rpm now.
It definitely feels like it makes more power and the boost comes in sooner for sure.
I have ? I Just in installed the same mouth piece on 05 lly and i smashed the wire connector under it. Didnt notice it until i had to reinstall clamp on one side! What im wondering what wire is to?
Hmmm, I didn’t have that problem. Hopefully it didn’t damage anything.
@@whiplashtv2022 it just smashed connector was wondering what it for? Thanks for getting back to me
@carloscastellanos1559 I would have to see a picture of the connector to know which one it is exactly.
What kind of exhaust is that?
It is just a 4” exhaust with no muffler
Lb7 turbo inlet is aluminum. And wont fit. You're probably thinking of the lmm.
I guess this was a reply to someone else’s comment…
Will this improve gas mileage?
It can, but that will also depend on how much you put your 🦶 into it
You have a word to reroute that part that you came off the factory outlet didn’t show that
It was already rerouted by the previous owner
Somebody convinced me to buy s&b "brand name product" is an outright piece of junk!
$195 for a piece of poorly - YES, POORLY - cast of aluminum alloy is ridiculous.
This thing is all rough inside so it's YOUR responsibility to sand it to the acceptable condition.
The picture on their site shows polished shiny hose surface while in reality, even cast ribs are carefully preserved.
I seriously doubt Chinese stuff for a fraction of the price is any worse.
CONCLUSION: They sent me a replacement that has been machined but it's still kind of rough inside. I am not good at upgrades - never had anything to do with detroit - but I was under impression that smooth surface makes a difference...
Good to know. That is terrible that it was that bad and cost you that much.
I went with the one in this video . Wasn’t going to spend 200 for the same thing
Yup, no need to spend $200. Save that money so you can buy other mods!
@@charlesc5983 Smart choice. Wish I did the same...
That is a lot bigger for not much money.
Yup, it is very cost effective!