Bought my 2004.5 - 2005, somewhat recently. Looks to have made to 308,000 completely stock with no problems. Idles great, drives fine, no blow by, nothing weird coming out of the tail pipe, coolant is normal, no bubbles in reservoir, etc Did upgrade the turbo inlet, deleted the EGR. Just waiting on a upgrade turbo down pipe, and passenger side up pipe. Think that should do it for now. Don't plan to sink a whole lot of money into upgrades yet (full HSP kit, lift, tires, etc). Need a 2nd job for that. And the truck should help me commute to a 2nd job long enough to make enough for that. Don't plan to upgrade the power, I believe it has enough.
I have an 04.5 that has 400,000 miles on factor head gaskets. Put an aftermarket turbo mouthpiece on it with a s&b air intake and never gets over 210 on the temp. I pull a 32ft cattle trailer and will gross around 32,000 pounds when fully loaded and will run 75 down the highway in 100 degree temps. Great truck. Out lived our Cummins and powerstroke we ran also.
04.5. Bought it with 110k, its got 180k now. Issues, headliner, cracked dash, headlight controls, window and heated seat controls, climate controler, steering column shaft, cylinder 2 and 7 injector harnesses, fuel pressure regulator, worn wire insulation rubbing on fender, front wheel bearings, water pump, and yes, when towing over a pass in 100F its gets very warm even with the new turbo inlet. I will be adding after market oil cooler to help the over heating. With that said, it has never left me stranded, and most the issues i named can be done if your handy.
Thanks for all the great info for all the different engines. Im doing some research for possibly buying my first diesel and you're info is super helpful.
Bought my 2005 recently and thanking about getting a cts 3 tuner so I can get some better fuel mileage and a 5” exhaust the truck has 177000 miles and been taken care of
Having a 6.0 power stroke that’s been “bulletproofed” but still having to deal with typical hpop problems I’ve been looking at getting another truck and found a 2005 Silverado lly with only 85k miles I’m interested in but I’m worried about how common head gasket failures are on them because looking through forums the general consensus is that they will go out no matter what. Do you think it’s pretty common and something I should watch out for with buying an lly with that low of miles.
n3wb - It is definitely common, but not at those mileage levels, so long as it has been maintained well up to that point. If it's been modded heavily or has towed a lot, i'd say no. However, if not, take it to a mechanic to have the head gaskets looked at. Keep us updated on this.
@@8020Media yeah so I bailed on the truck it took some prying to get information from the guy about it and he got really offended when I asked if it was a clean title because he wants almost 30k for it but it has a rebuilt title and he didn’t want to tell me what happened to it that caused it to get a rebuilt title and said if it was a clean title he’d want at least 40k for it. It looks really clean has a lift kit egr delete and exhaust. But I’m not buying a rebuilt truck for that much especially if the seller is being sketchy about the details. Im still looking around for an lly or lbz I’ll update you again if I get something.
Went and looked at tons of these before I bought the biggest fail point I saw was the head gasket which is serious. Check the radiator reservoir it needs to absolutely be clean no black gunk. Next delete the egr and do pcv reroute. Then air dog or fass lift pump. Check the transfer case seems to also be another fail point. Remember maintenance is everything to these trucks. The cs2 tuner it’s what I like I don’t want crazy horse power so 500 is plenty and more than most that’s out on the road. Next check the turbo up pipe on the pass side it break at the billet. Then 4 in not 5 straight pipe. I love my truck and to tell you the truth if im going to try to start pushing 750 plus I tear shit apart anyway and build the trans so I wouldn’t be worrying about the rods. Also the injector wires on 1 and 8 seem to chaff and through you into limp mod. If it does not already have the s&b inlet on it I wouldn’t but it. It means it’s had to of over heated before which mean that head gaskets at least on its way out.
Not necessarily, just depends on what you are looking to do with it. I would certainly recommend the 2006 models with the updated engine. But the older models are still solid reliability wise unless you are looking to mod it. Toss an upgraded inlet on it to help with heat issues and it'll be a solid engine. Now if you are talking a 200k+ mile engine and you are trying to tune it and push some decent power then I would say avoid the LLY. Maintenance history will play a big role in reliability too.
Bought my 2004.5 - 2005, somewhat recently. Looks to have made to 308,000 completely stock with no problems. Idles great, drives fine, no blow by, nothing weird coming out of the tail pipe, coolant is normal, no bubbles in reservoir, etc Did upgrade the turbo inlet, deleted the EGR. Just waiting on a upgrade turbo down pipe, and passenger side up pipe. Think that should do it for now. Don't plan to sink a whole lot of money into upgrades yet (full HSP kit, lift, tires, etc). Need a 2nd job for that. And the truck should help me commute to a 2nd job long enough to make enough for that. Don't plan to upgrade the power, I believe it has enough.
Sean - Sounds like you've got a nice setup! Hope you get another 308k out of it!
Two of my dads work trucks are a 2005 and a 2006 LLY duramax both have had no problems and have over 450,000 kilometres
I have an 04.5 that has 400,000 miles on factor head gaskets. Put an aftermarket turbo mouthpiece on it with a s&b air intake and never gets over 210 on the temp. I pull a 32ft cattle trailer and will gross around 32,000 pounds when fully loaded and will run 75 down the highway in 100 degree temps. Great truck. Out lived our Cummins and powerstroke we ran also.
Sweet, that's awesome thanks for sharing!
I haven’t seen videos of radiator upgrades but it should be doable without too much modification
T - We have a mod video for the LLY if you’re looking for that.
04.5. Bought it with 110k, its got 180k now. Issues, headliner, cracked dash, headlight controls, window and heated seat controls, climate controler, steering column shaft, cylinder 2 and 7 injector harnesses, fuel pressure regulator, worn wire insulation rubbing on fender, front wheel bearings, water pump, and yes, when towing over a pass in 100F its gets very warm even with the new turbo inlet. I will be adding after market oil cooler to help the over heating. With that said, it has never left me stranded, and most the issues i named can be done if your handy.
Jeff - Thanks for adding your experience with the LLY!
I’m looking at getting a 2005 lly with 190k miles. Its super clean and well taken care of. Should I not get it?
D - Is it deleted?
Commenting for support.
Love my ccsb lly.
Jay - We appreciate the support!
Thanks for all the great info for all the different engines. Im doing some research for possibly buying my first diesel and you're info is super helpful.
Nice! Great to hear, thanks for the feedback.
Is my 04.5 Lly exactly the same as the 05?
B - It should be.
Bought my 2005 recently and thanking about getting a cts 3 tuner so I can get some better fuel mileage and a 5” exhaust the truck has 177000 miles and been taken care of
Wyatt - You should definitely be able to get 175k+ more out of it!
Make sure to get a aftermarket lift pump
Although I love the LBZ, I would rather have a LLY than a LB7.
T - Thanks for sharing your experience. Different engines for different folks.
You might want to add FICM failures with no replacement parts. Also can add no stock replacement glow/quality plug modules.
M - Thanks for the insight here. Will certainly be helpful for future viewers!
Having a 6.0 power stroke that’s been “bulletproofed” but still having to deal with typical hpop problems I’ve been looking at getting another truck and found a 2005 Silverado lly with only 85k miles I’m interested in but I’m worried about how common head gasket failures are on them because looking through forums the general consensus is that they will go out no matter what. Do you think it’s pretty common and something I should watch out for with buying an lly with that low of miles.
n3wb - It is definitely common, but not at those mileage levels, so long as it has been maintained well up to that point. If it's been modded heavily or has towed a lot, i'd say no. However, if not, take it to a mechanic to have the head gaskets looked at. Keep us updated on this.
@@8020Media yeah so I bailed on the truck it took some prying to get information from the guy about it and he got really offended when I asked if it was a clean title because he wants almost 30k for it but it has a rebuilt title and he didn’t want to tell me what happened to it that caused it to get a rebuilt title and said if it was a clean title he’d want at least 40k for it. It looks really clean has a lift kit egr delete and exhaust. But I’m not buying a rebuilt truck for that much especially if the seller is being sketchy about the details. Im still looking around for an lly or lbz I’ll update you again if I get something.
N3wb - Sounds like it is probably best! Keep us updated on what you end up doing!
Looking at a 2005 lly with 194k on it anything I should specifically looks for?
Slush - The things we mention in the video and if maintenance has been kept up with.
Really nice to share Your very informative and helpful thank you
M - Thanks for the feedback! We hope it was helpful.
Vein position sensor is a common problem to I believe
B - Thanks for sharing this insight.
So if I plan to build my 2006 lly to 500whp can I reference your lbz 500whp video?
A - Yep, or we have a great article on our Chevy Trucks website: chevytrucks.org/duramax-lly-mod-guide/
Must be a ford boy!!
M - We own a Ford, but we wouldn't necessarily say we are a "ford boy". But okay!
Went and looked at tons of these before I bought the biggest fail point I saw was the head gasket which is serious. Check the radiator reservoir it needs to absolutely be clean no black gunk. Next delete the egr and do pcv reroute. Then air dog or fass lift pump. Check the transfer case seems to also be another fail point. Remember maintenance is everything to these trucks. The cs2 tuner it’s what I like I don’t want crazy horse power so 500 is plenty and more than most that’s out on the road. Next check the turbo up pipe on the pass side it break at the billet. Then 4 in not 5 straight pipe. I love my truck and to tell you the truth if im going to try to start pushing 750 plus I tear shit apart anyway and build the trans so I wouldn’t be worrying about the rods. Also the injector wires on 1 and 8 seem to chaff and through you into limp mod. If it does not already have the s&b inlet on it I wouldn’t but it. It means it’s had to of over heated before which mean that head gaskets at least on its way out.
Thanks for the hands on advice. Overheating is the biggest issue with these engines - needs to be addressed for sure.
So would you avoid a lly?
Not necessarily, just depends on what you are looking to do with it. I would certainly recommend the 2006 models with the updated engine. But the older models are still solid reliability wise unless you are looking to mod it. Toss an upgraded inlet on it to help with heat issues and it'll be a solid engine. Now if you are talking a 200k+ mile engine and you are trying to tune it and push some decent power then I would say avoid the LLY. Maintenance history will play a big role in reliability too.