I said it once and say it again.... dude I love your style. Chilling music, just working.... no shit talking... please continue your work. I really enjoy your vids
Hopefully you remembered to re-torque your front control arms to the new ride height, as that will tear the bushings very quickly. Also, I highly recommend some AKG bump steer correction plates to keep the steering geometry proper when lowered. (I’ve installed a lot of coilovers on E34’s at my shop, I speak from experience)
I have all new bushings for the car so I didn’t do that with anticipation to change them but I haven’t heard of the AKG correction plates, will check them out!
1st time responding to your vids. Love your scenes and edits bro...music too. Chill. LOL...even I got the DCD pun 🙂 Keep up the good work. Cheers from Trondheim, Norway.
Seen that its already mentioned, but don't forget to loosen off the control arms and retorque them at the new ride height, bushes will last a whole lot longer, or even better get a set of E31 control arms, they have spherical bearings in them, and a set of moosehead spherical inserts for the other pair of arms, nice and tight front end then, it's what I ran in my old E34. Also, grab some euro bumper trims, gets rid of the side clearance lights for a smoother look.
Yessir! I have new bushings for the car so I’ll adjust it accordingly then. I haven’t heard of people using the e31 control arms on these, I’ll look into that as I’ll do a subframe/suspension refresh next winter
What a beautiful video homie. Who would have thought wrenching could ever be such a visually pleasing experience. Basically, it’s only possible when filmed, edited, and posted by Chromatic Garage. Love what you do bru.
I’ve been wanting to install a set of BC Racing Coilovers on my G coupe…then I woke up from my dream and the reality that I have 0 mechanical inclination. Great video brother
Let me know what you think of 16k on front and rear... I imagine it's going to be very jarring. I have roughly 12.5k fronts w/ helper springs, and roughly 9k in the rear w/ helper springs and it's perfect for all uses.
Man I was not expecting that lengthy dissy of the trunk to get to those upper strut nuts, but that just means more opportunities to clean! Loved the vid and can’t wait for the reveal
I feel a little guilty for not stopping by earlier... But excellent video dude! Great to see that these older cars get the love they deserve :) such a classic, that e34! Really appreciate your DIY attitude for all the modifications :) keep it up buddy! :D
Those look great! I had coil overs on my cobra but took them off cause it was just way to ruff of a ride. When my kids say it was a ruff sit in the back I knew it was time to do something different lol.
Great work, looking forward to the next vid. Although thought you may of refreshed the callipers prior to re-fitting, as those sparkly new wheels will show them off.
The “CZD” had me dying 😂🤣 but man you couldn’t have picked a better set of splits for that car, especially with the red OG style center caps to match!?.. 🤤 good god... wouldn’t expect anything less though haha Ive wanted to run a set of futuras on literally anything for forever. Classic, simple, timeless design, and gorgeous on any euro 🤌🏼 Idk if they already gave you a little hookup on the coils, but if not I wish I would have known, man! Could’ve got you a bit of a deal on a set of broadways 😬 your videos always get me so motivated to go work on my car 😂 and especially now that I got the daily Tiguan R somewhat where I want it, but I FINALLY landed my Estoril blue coupe/black nappa Vader interior e36 m3 project 🙆🏻♂️ Been looking for almost a year now, and actually found one that checked every single last box, about 2 weeks back 🤤 Another banger video in the build lineup 🙌🏽 you never disappoint. Can’t wait to see it all buttoned up with the wheels on, and w/e else you got planned for it, sitting next to your e36 😍🤤
That’s how I feel man! It’s absolutely a dream wheel for me. If not theeeee dream wheel haha. Congrats on the M3 man! Estoril blue is absolutely one of my favourite colours bmw has ever done. I’m sure your very excited to get started working on it. Thanks for the kind words man. Hope your week is blessed!🙏🙏🙏
@@ChromaticGarage man my mind is going a million miles an hour with ideas for it haha super hyped. Since I managed to somehow find one with almost every specific exterior/aero/interior option I wanted, the only thing I really need/want to do is source and refurb either the AC Schnitzer or Dinan exhaust (even though both are rare af), put it on coils, DTM diffuser, and rebuild an era correct set of splits for it 🤌🏼 then just maintain it and keep it as mint as possible haha I have the wheels narrowed down to a few sets haha if I could find some gotti 1001’s it would be the full 100% extra next level dream build, but doing a step up of some epsilons are next on the list. Thing makes me feel like a little kid on his birthday 😂 Also, idk if I’ve said it before, but if not, I highly recommend picking up some coilover blankets 🙌🏼 ever since I found out about them, and bought some for my old STi build, I’ve now bought a set every time I order new coilovers for a new build. By far the best investment and most favorite part I buy for every car. Keeps em sealed up, and staying brand new for the entire lifespan. I always unbox the coils, fully disassemble em, hit em all with some never seize/anti seize, spin em back together, and throw em on, and throw the coilover blankets on. BCs on the STi still looked brand new 9 years later 🤌🏼
Great looking wagon. I run a 535i sport saloon and am just looking at coilovers. Are these available here in the UK? I may do a couple of videos about my E34 but they won’t look as professional as yours do. Nice work!
Oh my GAWDDDDD!! How can you leave us not putting the wheels on like that 🤦🏽♂️🤣 can’t wait to see it on the floor with new wheels it’s gonna look HAWT!! What was that silver paste you put under the disk brakes? We have copper grease here in the uk but its brown never seen it in silver!
That wagon is going to look sick ones is done... My and you almost have similar cars BTW, only own 1 98M3 vert, & 1 07 rear wheel e91 wagon. Algo another e36 sedan & 1 F30 but that’s another story 🙂 Like you’re videos 🙏🏽
A réal awesome one like usually 😎😜by the way your rims are OZ futura very very Nice Classic rims ( italian manufacture😜)keep it going on your bimmer 💪 Cheers and see you on your next one 😎
Nice! Just need that E30 Touring now....🍩😎 Great score on the DZD's... I actually have some low quality reps of these from Italy. I think they where made by a shady company called O.Z. or something cheesy. Unfortanly cant afford any real wheels for the time...
That's not the greatest spray paint for exterior parts that I've used. If you can use some 2K to coat it that would be better. I personally like VHT Epoxy, little better for suspension parts but I get gotta work with what is available. Nicely done!
Irgendwie fand ich unseren TÜV von Zeit zu Zeit doof, aber wenn ich den Pfusch sehe, weiss ich wieder, warum der eingeführt wurde. 🤦♂️ Manche Autos sollte man Amerikanern echt nicht verkaufen. 🙆♂️
I said it once and say it again.... dude I love your style. Chilling music, just working.... no shit talking... please continue your work. I really enjoy your vids
Thank you Marcus! Imma keep making em if you keep watching em!
@@ChromaticGarage deal! 😉
saaame
just found this channel.Not to much talking.Just a casual laid back enthusiast doing what he loves.
we appreciate you!
Thanks Adam, I appreciate it!
Hopefully you remembered to re-torque your front control arms to the new ride height, as that will tear the bushings very quickly. Also, I highly recommend some AKG bump steer correction plates to keep the steering geometry proper when lowered. (I’ve installed a lot of coilovers on E34’s at my shop, I speak from experience)
I have all new bushings for the car so I didn’t do that with anticipation to change them but I haven’t heard of the AKG correction plates, will check them out!
1st time responding to your vids. Love your scenes and edits bro...music too. Chill. LOL...even I got the DCD pun 🙂 Keep up the good work. Cheers from Trondheim, Norway.
Thank you John! I appreciate you watching. Much love from Canada 😊
Nice to see Broadway Static is still around. I remember when the company started about 10 years ago. The Wagon is going to look awesome!
Very very cool man! Great guys. And thank you, I’m pretty excited!
Seen that its already mentioned, but don't forget to loosen off the control arms and retorque them at the new ride height, bushes will last a whole lot longer, or even better get a set of E31 control arms, they have spherical bearings in them, and a set of moosehead spherical inserts for the other pair of arms, nice and tight front end then, it's what I ran in my old E34.
Also, grab some euro bumper trims, gets rid of the side clearance lights for a smoother look.
Yessir! I have new bushings for the car so I’ll adjust it accordingly then. I haven’t heard of people using the e31 control arms on these, I’ll look into that as I’ll do a subframe/suspension refresh next winter
Best music on RUclips 🎧
I appreciate that bro!
@@ChromaticGarage might need that in a Spotify playlist man!
I love the attention to detail
Thanks Dillian! Hope you’re having a great week free of dairy products!
Beautiful E34! and I think the 'OZ' wheels looks great. I’ｍ looking forward to the next upload!
Thank you bro! I am very hyped to get them on
Found this channel yesterday and you’re inspiring me to work on my E30. Video quality is overkill for RUclips. I mean that as a compliment.
What a beautiful video homie. Who would have thought wrenching could ever be such a visually pleasing experience. Basically, it’s only possible when filmed, edited, and posted by Chromatic Garage. Love what you do bru.
Got a new phone, glad I can finally enjoy this craftsmanship without a home button. Shirts look awesome too, perfectly sums me up!
Haha I feel that man! I have had a cracked screen for a year. Upgrade soon🙏 Much love dude!
Wow man! Great work! This was a dope process to watch
Just can't wait to see those wheels installed. Absolutely gorgeous! Good for you.
Same man! Super super hyped about it 😎🖤
I’ve been wanting to install a set of BC Racing Coilovers on my G coupe…then I woke up from my dream and the reality that I have 0 mechanical inclination. Great video brother
You got that man! Always just a few nuts and bolts!
Oofda, this thing is going to look gorgeous. Looking forward to it.
Thanks Steve! I’m pretty excited 😊
very cool video and very cool touring , good luck !!
Let me know what you think of 16k on front and rear... I imagine it's going to be very jarring. I have roughly 12.5k fronts w/ helper springs, and roughly 9k in the rear w/ helper springs and it's perfect for all uses.
Man I was not expecting that lengthy dissy of the trunk to get to those upper strut nuts, but that just means more opportunities to clean! Loved the vid and can’t wait for the reveal
I feel a little guilty for not stopping by earlier... But excellent video dude! Great to see that these older cars get the love they deserve :) such a classic, that e34! Really appreciate your DIY attitude for all the modifications :) keep it up buddy! :D
Those look great! I had coil overs on my cobra but took them off cause it was just way to ruff of a ride. When my kids say it was a ruff sit in the back I knew it was time to do something different lol.
Haha I feel you, if kids mention it, it’s definitely too stiff. I’m sure it looked fantastic though!
i’ve been struggling deciding between bc extreme lows and broadway static and just wanted to hear your thoughts and opinion
All good stuff brother!
What were the black plastic crates being used for?!
Thanks man! They were just holding the brake calipers so there wasn’t pressure on the lines 😊
Love the easter eggs, E36 subframe at 46 seconds
Haha this guy has an amazing eye. Will be restoring that soon for the vert
Dope setup!!! Can’t wait to get my E46 done up
These are OZ Futura/Fittipaldi and they wolud be soooooo freaking good on E34 cant wait to see them on
Great work, looking forward to the next vid. Although thought you may of refreshed the callipers prior to re-fitting, as those sparkly new wheels will show them off.
Great job!! The car get‘s better than new
Wagon is going to look sick with either set of wheels. 🔥
Thanks bro! I’m pretty dang excited ☺️
Beautiful work as always, just did all 4 shocks on my daily yesterday. it always baffled me why bmw made the shock body and knuckle one piece.
Haha imagine all the return $ on service hourly rates at bmw dealerships! Thanks bro! Much love
your wheels are called OZ Futura very popular back in the day
The prettiest 5 series 😍😍
Love the video. Love them all, keep them coming!
I love everything ...white floor , red BMW ...👍
Love your videos to calm down from daily Stress ❤️
Thanks Daddy Chrome. Been waiting for the e34 touring to get slammed.
These are OZ Futura wheels (italian brand), very nice!
Amazing video again! Very relaxing! I was wondering what kind of grease? you are putting on the hub at 16:20 ?
Asking myself the same
@@1tausend He is using aluminium anti-seize.
@@SenD99 thanks man!
Getrag cart is on the move again🙌🏼🙌🏼 favorite little bit of each video😂😂 just like “ope there he goes again”👉🏼
The rims with the red logo are OZ Futura, I guess they come from the same factory where OZ racing rims are made. Big deal for us in Europe
The “CZD” had me dying 😂🤣 but man you couldn’t have picked a better set of splits for that car, especially with the red OG style center caps to match!?.. 🤤 good god... wouldn’t expect anything less though haha Ive wanted to run a set of futuras on literally anything for forever. Classic, simple, timeless design, and gorgeous on any euro 🤌🏼
Idk if they already gave you a little hookup on the coils, but if not I wish I would have known, man! Could’ve got you a bit of a deal on a set of broadways 😬 your videos always get me so motivated to go work on my car 😂 and especially now that I got the daily Tiguan R somewhat where I want it, but I FINALLY landed my Estoril blue coupe/black nappa Vader interior e36 m3 project 🙆🏻♂️ Been looking for almost a year now, and actually found one that checked every single last box, about 2 weeks back 🤤
Another banger video in the build lineup 🙌🏽 you never disappoint. Can’t wait to see it all buttoned up with the wheels on, and w/e else you got planned for it, sitting next to your e36 😍🤤
That’s how I feel man! It’s absolutely a dream wheel for me. If not theeeee dream wheel haha. Congrats on the M3 man! Estoril blue is absolutely one of my favourite colours bmw has ever done. I’m sure your very excited to get started working on it. Thanks for the kind words man. Hope your week is blessed!🙏🙏🙏
@@ChromaticGarage man my mind is going a million miles an hour with ideas for it haha super hyped. Since I managed to somehow find one with almost every specific exterior/aero/interior option I wanted, the only thing I really need/want to do is source and refurb either the AC Schnitzer or Dinan exhaust (even though both are rare af), put it on coils, DTM diffuser, and rebuild an era correct set of splits for it 🤌🏼 then just maintain it and keep it as mint as possible haha I have the wheels narrowed down to a few sets haha if I could find some gotti 1001’s it would be the full 100% extra next level dream build, but doing a step up of some epsilons are next on the list. Thing makes me feel like a little kid on his birthday 😂
Also, idk if I’ve said it before, but if not, I highly recommend picking up some coilover blankets 🙌🏼 ever since I found out about them, and bought some for my old STi build, I’ve now bought a set every time I order new coilovers for a new build. By far the best investment and most favorite part I buy for every car. Keeps em sealed up, and staying brand new for the entire lifespan. I always unbox the coils, fully disassemble em, hit em all with some never seize/anti seize, spin em back together, and throw em on, and throw the coilover blankets on. BCs on the STi still looked brand new 9 years later 🤌🏼
OZ futuras... dear God why did I ever sell my set?! Great video dude!
Thanks bro! Might be time to buy another set🥺
Low, Low, Low I Love it😁
Haha my thoughts exactly. Thanks dude 🖤
The Wheels are OZ Futuras I guess...will look nice! Greetings from Germany to ca
Ahh yes, DZD wheels. Top quality.
I heard they’re also modular or something!
Great looking wagon. I run a 535i sport saloon and am just looking at coilovers. Are these available here in the UK? I may do a couple of videos about my E34 but they won’t look as professional as yours do. Nice work!
Wish my e34 touring be this clean. Well one day. Nearly 3k worth of oem replacemt metal colected ready to get welded soon
mate what are those floor jacks you use?? another masterpiece as per 🤝
Very good, but I had a question, these cars are all yours
The e34 and e36 are mine😊
Tanks 👍🏻☺
So what about the BMW F30?
Never clicked so fast on a video before
Haha this one was exciting for me too. Hope all is well Kevin!
did you break the trim holding the seatbelt?? @6:35
Oh my GAWDDDDD!! How can you leave us not putting the wheels on like that 🤦🏽♂️🤣 can’t wait to see it on the floor with new wheels it’s gonna look HAWT!! What was that silver paste you put under the disk brakes? We have copper grease here in the uk but its brown never seen it in silver!
Aka "Chromatic-spec-cliffhanger" 🤣👍
You have a really good job and great video
It's going to look awesome. Nice to see its not that hard a job to change the suspension on the e34 😏😀
I’m hyped man! Definitely slightly harder than it needs to be but that’s okay haha
You tease 💎
Hahaha sooooon!😎
Chuck 70s cargo pants & e34s. He just like me fr.
This is going to look so good if the fitment is on point!
What kind of jack stands are those?
They’re the Canadian tire brand. They’re okay but they look nice haha
@@ChromaticGarage thanks man
カッコよくなりそう!
たのしみにしてます
Thank you friend!!🖤
That wagon is going to look sick ones is done...
My and you almost have similar cars BTW, only own 1 98M3 vert, & 1 07 rear wheel e91 wagon.
Algo another e36 sedan & 1 F30 but that’s another story 🙂
Like you’re videos 🙏🏽
Your BeeEmm is gorgeous 😍🇩🇪
Thank you bro!!
My boy said, “i got these really cool wheels, I can’t remember the name. DZD?”
“I usually trust people online” 😂
Man… how long did it take? That’s crazy, your videos are always better … just insane
When he works on cars and details them😩🔥
Great video as always brother!💀🤣
A réal awesome one like usually 😎😜by the way your rims are OZ futura very very Nice Classic rims ( italian manufacture😜)keep it going on your bimmer 💪
Cheers and see you on your next one 😎
Can you griddy 4 m3?
Hahaha bro I’ll griddy for a 318. Of couuuurse
Excellent as always. You never disappoint. The new wheels are 🔥🔥 How do you like the ride?
Love it. 👍👍
Thanks Danny! Keep killing it dude!
Gee that looks tricky.
Knuckle is annoying but everything else super light!
Oh my god isane my dream!🇧🇷👏🏽👏🏽👏🏽👏🏽👏🏽
You got that g!! Much love from Canada 🙏✅
Nice! Just need that E30 Touring now....🍩😎 Great score on the DZD's... I actually have some low quality reps of these from Italy. I think they where made by a shady company called O.Z. or something cheesy. Unfortanly cant afford any real wheels for the time...
Wait, shady? I thought f1 wheels made by O.Z?
Hahaha hilarious. Can’t trust those companies man! Let’s toss an E30T in a shipping container real soon!
@@ChromaticGarage I found one gem that might intrest you... hit me up when you can buddy 👍
So sick man
👍
Thanks friend!
Such a troll with the DZD :D
Ignorance is bliss man!😭
Чувак, у тебя просто афигенная машина
Мечтаю о такой
Респект тебе)
Thank you my friend!
Great job, awesome video
Thanks Mike!🙏
wheels are called OZ futura!
Mine are super bouncy, idk why e30
How are you liking the 16k/16k spring rates?
Car is definitely still in the air!
That's not the greatest spray paint for exterior parts that I've used. If you can use some 2K to coat it that would be better. I personally like VHT Epoxy, little better for suspension parts but I get gotta work with what is available. Nicely done!
It's baffling to me how rust free this car is. Is it originally a Canada car?
Anybody know anything about those wheels ?
that'a alot of work just to put the rear ones damn
Haha dude it’s so dumb. Much easer on the sedan e34s
По моему в стоке вся красота была и ценность
Love a estate car
Same bro! Hope all is well🙏
😍😍😍😍😍😍
I feel the same way bro😭
안녕 친구
자동차 정비도 잫 하는지 몰랐어
영상 재미있네 고생했어
다음 영상이 궁금해 기다릴께.
Those wheels are from Oz racing wheels
"Carolina blue kicks..."
Sneaky gearbox on the undertray of that cart
That’s for something else but definitely super sneaky haha 😭
You got a variety of sneakers 👍😄👌
I bet his walk in closet I bigger than his garage.... 😆
Variety is good! We like variety!
It's damping not dampening btw. 😉
Click the like button to see chromatic on a livestream
Would consider a podcast if the flames win a cup. That should be enough insurance to not have to 🙏
@@ChromaticGarage so i have a chance...... 😆
🗿🗿🗿
time for that belly to touch the ground
I have put on a little weight over Covid but god dang man! That’s a bit much
@@ChromaticGarage 😆 no, no…. was referring to the wagon
Irgendwie fand ich unseren TÜV von Zeit zu Zeit doof, aber wenn ich den Pfusch sehe, weiss ich wieder, warum der eingeführt wurde. 🤦♂️ Manche Autos sollte man Amerikanern echt nicht verkaufen. 🙆♂️
Paint the calipersssssssss...............for the love of Goddddddd...........nice work BTW :)
1st
I wrote the description, I AM FIRST
1st
You got by just 2 seconds after me😄👍
@@1stfrompuertorico568 beat ya again
@@1stfrompuertorico568 who cares?
@@MikesAutoDetailing nice try brother man 😄👌👍
@@aliaskink 😄😄😄look who's back, the one who cares.😄😄😄