hey I need some help, I just made a custom loom for my K20A2, but the Primary trigger and secondary triggers are not responding.. cant figure out why.. got any tips?
Signals can't be spliced, as you can't feed multiple sensor signals into one input. Grounds can be spliced. There's no real limit for splicing sensor grounds as there's very little current.
Top vidéo ..mais j’ai pas tout compris car je suis français et je comprend pas l’anglais..pourriez vous faire une vidéo en français afin que je puisse m’acheter le matériel ecuMaster emu black sur votre site .
The Bluetooth adapter plugs right in the standalone. The "Intake Air Temp" sensor goes to pin 21 on the black connector on the EMU classic. The GM IAT sensor has 2 pins and it does not matter what pin is what but one goes to the standalone and the other gets grounded. I am running the GM IAT with the EMU classic on my Supra.
Useful. A Video On Auto-tuning feature and the use of that to potentially get a complete tune done would be nice.
Yeh I'd really like to see you pull the pins from the emu connector I've done 1or 2 wrong terminatoins and I can't get them out
hey I need some help, I just made a custom loom for my K20A2, but the Primary trigger and secondary triggers are not responding.. cant figure out why.. got any tips?
If you're in north america, email support@ecumasterusa.com with your project file and any relevant wiring details and a complete question.
Can you do a video on wiring up the outputs for fuel pump, fans, a/c etc ?
So how do you do this task if my ECU is the PNP for the Lotus?
I know this video kinda old but thanks how about any info with egt wiring sensors
Soon
Can we get a video on wiring and setting up DBW throttle bodies?
Adding that to the list of videos! Thank you!
Where can i find the pinouts?
How many wires can I splice into 1 signal or ground wire?
Signals can't be spliced, as you can't feed multiple sensor signals into one input. Grounds can be spliced. There's no real limit for splicing sensor grounds as there's very little current.
Top vidéo ..mais j’ai pas tout compris car je suis français et je comprend pas l’anglais..pourriez vous faire une vidéo en français afin que je puisse m’acheter le matériel ecuMaster emu black sur votre site .
Thank you
Hello,
Do you have the part numbers for the connector terminals? both the smaller and larger ones plug and socket.
Many thanks
Do a video on how to wire the blue tooth adapter. IAT sensor. Boost controller PLEASE
The Bluetooth adapter plugs right in the standalone. The "Intake Air Temp" sensor goes to pin 21 on the black connector on the EMU classic. The GM IAT sensor has 2 pins and it does not matter what pin is what but one goes to the standalone and the other gets grounded. I am running the GM IAT with the EMU classic on my Supra.
'very basic wiring' except you pinned the pressure sensor connector wrong. 0v and signal are swapped.