Do you water down your accy primmer for the woodwork. If so how much water do you mix in with the primmer?? By the way, nice job, you make it look so easy Candleman.
I have to BIN prime all angle beads first before starting emulsion as rust will come thru nearly straight away. Even undercoat on beads sometimes but then drying time a problem if only doing 1 or 2 plots
I’m new to spraying and have a question. If you don’t back roll over the spray and you use tape on it does it increase the likelihood of peeling? I ask as Iv sprayed satin on woodwork (acrylic) and had to use tape on the wall and it all peeled off (the satin overspray on the wall). Just wanting your expert opinion thanks
Try it this way pal ,works for me, fill pin holes then ,while it's drying ,tape up the place , rub down all woodwook ,get yourself a dewalt blower ,40 quid, sweep and blow the place out ,get that accy in your sprayer 310 tip ,spay all woodwork, , then caulk up everything then if it's all going white double coat the place with a 517 tip , sand or denib between coats ,final day satin all wood work ,3 or 4 day's easy mate ,put your feet up friday😂, if the satin is waterbased may have done it differently and sprayed woodwork before finishing walls and if the walls are going a different colour to ceilings may have cut in around frame's and cieling lines with brush😊 thank me later
Don’t get why you wouldn’t mist directly after skimmers finish Shows up shit plastering /patching etc Plus good coat on plot especially kitchen Area Hour an half for a four bedder
Great ending clips loved story telling at the end
Do you water down your accy primmer for the woodwork. If so how much water do you mix in with the primmer?? By the way, nice job, you make it look so easy Candleman.
That 390 a nice bit of kit Mark 👍
What percentage of plots would you say don’t have power in them?
Get yourself a 12" extension wand for your sprayer
Definitely, saves your back
I have to BIN prime all angle beads first before starting emulsion as rust will come thru nearly straight away. Even undercoat on beads sometimes but then drying time a problem if only doing 1 or 2 plots
I’m new to spraying and have a question. If you don’t back roll over the spray and you use tape on it does it increase the likelihood of peeling? I ask as Iv sprayed satin on woodwork (acrylic) and had to use tape on the wall and it all peeled off (the satin overspray on the wall). Just wanting your expert opinion thanks
Don't use contract matt if you can help it, I use vinyl matt thinned down or optiva wall primer as first coat, much better
@@beecee985 Armstead contract matt got a good skin on it, not as soft a finish. Dirt cheap also the plaster will need to be fully dry for vinyl matt.
Try it this way pal ,works for me, fill pin holes then ,while it's drying ,tape up the place , rub down all woodwook ,get yourself a dewalt blower ,40 quid, sweep and blow the place out ,get that accy in your sprayer 310 tip ,spay all woodwork, , then caulk up everything then if it's all going white double coat the place with a 517 tip , sand or denib between coats ,final day satin all wood work ,3 or 4 day's easy mate ,put your feet up friday😂, if the satin is waterbased may have done it differently and sprayed woodwork before finishing walls and if the walls are going a different colour to ceilings may have cut in around frame's and cieling lines with brush😊 thank me later
@petra2885 yea, not straight away tho
what sprayer are you using if you don't mind me asking as i'm going to purchase one soon your set up seems bang on 👍?
Graco 390 cordless, comes with 2 x 6ah 🪫 🔋but may need 2 x 12ah battery’s on top 🕯
Thank you sir👍
Brilliant job .. sprayer paying for its self..
Do you not mask the skirts etc?
Bloody good show
I’m new to spraying I’ve got 50 rooms to spray on a student accomadation what advice can you give me thanks
get some one else to do it 😊
Who let this guy loose with a sprayer? 😂
Blue 1227 is what you want👌🏻 special order
I’m a year older 56 , you look better than me 👍
Don’t get why you wouldn’t mist directly after skimmers finish
Shows up shit plastering /patching etc
Plus good coat on plot especially kitchen
Area
Hour an half for a four bedder
55? Tough paper round
Same paint on the woodwork. Ok
Obliterated! Just one tip would you consider my old dear a blue 517 HP tip it has a bigger hole its mainly for mist coats .
Your gonna brush and roller around the windows and spray the rest 😂 not a sprayer then tape and film them up
Bollocks mate, cover the bloody windows, then just spray away, no sense there
Standing on the rad
Get a life
The overspray on those windows 🫣. At least use a shield or some corex . Btw use a 9” extension and a clean shot you will thank me later .