ok the bed of the sled is 3/8 thick 8 by 16 the toggle block is 1 inch thick 7 long 2 width and the lock down plate with handle is 6,5 long 4 inchs width 3/4 plywood
I like this idea, simple with less to throw off the 90 degree setting. One question: do you find the 1/4" base rigid enough to remain flat on the table when under the toggle clamp pressure? Thanks.
hello thanks yes it stays flat 100 percent with the toggle pressure ive had no issues and you dont need alot off pressure with the toggle it has a good hold down with decent pressure
Thank you, I was looking for a simple design. I built mine yesterday and it works great
@@AlansMovies1 thank you
Really good idea for cutting the base you way did
Thank you
I really like your coping sled. Can you give us list of materials you used. Size and thickness.
hello thank you yes when i get into the shop tomorrow i i will shoot you a list and size
ok the bed of the sled is 3/8 thick 8 by 16 the toggle block is 1 inch thick 7 long 2 width and the lock down plate with handle is 6,5 long 4 inchs width 3/4 plywood
@@ltscustomwoodworks4052 Thanks for the update
I like this idea, simple with less to throw off the 90 degree setting. One question: do you find the 1/4" base rigid enough to remain flat on the table when under the toggle clamp pressure? Thanks.
hello thanks yes it stays flat 100 percent with the toggle pressure ive had no issues and you dont need alot off pressure with the toggle it has a good hold down with decent pressure
@@ltscustomwoodworks4052 Thanks for letting me know. Have a good day.
Nice simple sled.
thank you