A Simple Router Sled anyone can make
HTML-код
- Опубликовано: 17 окт 2022
- In this video I make a Router Sled,
This Router sled will allow me to flatten larger Cutting boards, and also any other large surfaces in future woodworking projects
Tools I use in my workshop and vids
*Disclaimer: This video or video description contains affiliate links. That means that I am awarded a small commission for purchases made through them, at no added cost for you.
AMAZON USA
Battery LEDs (not exactly the same as I used in my vid)
amzn.to/3UTY1yp
Dowel Screws
amzn.to/41s8Rhn
DeWalt D26200 Router 120v Corded.
amzn.to/3N0DCph
Sanding Disks
amzn.to/40oXk1a
AMAZON UK
X-Protector Pads
amzn.to/3mRBPZb
Battery LED’s
amzn.to/3oAlUin
Titebond 3 waterproof glue
amzn.to/3oxjGAr
Dowel Screws Wood to Wood
amzn.to/3KSbhyS
DeWalt D26200 Router 230 Volt
amzn.to/3LkeEQt
Sanding Discs
amzn.to/3oBIYx2
Bosh Router
amzn.to/41NCo5x
Pipe Clamps
amzn.to/3LfV7Qb
#woodworking #cuttingboard #choppingboard #diy #exoticwood #endgrain
#router #routersled #router Хобби
Hello , for me putting together a router sled is similar to putting together a train set . What I mean is that I’ve tried making one before and I made plenty of adjustments since the old design , now my rails are being glued in my brace , the materials I used the last time were too thick , so now I learned that thinner material for the rails are much better for the size of my router , you learn how to make router sleds you’re way I see many different ways, and different materials, but mine is still in the learning and growing process , I want to make oak cup holders for vans and suvs I exchange the grain and glue different types of oak to make one board and when it’s router planed and sanded it will look very sharp , well that’s all for now my brother , all the best 😊
Brilliant mate good tutorial and an Englishman 90%of all the videos that I've seen are mostly American so thank you I've just started doing and making cutting boards
So some good advice ❤
Hi thanks for your videos your manner and how you put things across are just right, I'm very new to this and learning,all be it slow from what you do. Thank you, Geoff
Thanks for the video. You are the only one who has emphasised getting the frame flat. I think you could have gone a bit further though and used a laser level but if you don’t one of those then the “Winding Stick” technique would be adequate (youtube vids available). Good stuff, thanks.
solid project. easy to make
Thank you :).
Hey Man. Thanks a lot for sharing your videos, I just found your channel and really liked this video. Could you tell me how deep do you put your Router / how many mm you take down from your wood. Like 3 mm or more. Thanks for your advice and best regards from Germany. 😊
No issues with sound for me young man 👍
Do you like that bosch router? I get to see it in home center, it was hard to push down, and I find the locking mechanism is awkward.
I have the same problem with it. Pushing it down is really hard. You start pushing it and nothing happens. Then it suddenly drops because I’m putting more and more pressure on it. There is no smoothness to it. So I always set the depth I want first then go. Stop then adjust the high, Then go again. It’s a pain and I will get a replacement at some point.
@@hazelnutwoodcraft If its available Erbaur 2100 was a great one its was the smoothest and has a 2100watt powerful motor comes with great accessories would recommend it
Thanks. I will make a note of that
Mines the same , too hard
Simple sled anyone can make as long as you have a joiner and planer already that make the sled obsolete 😂
Good video idea, but you need to remake it with proper volume. sorry it was very annoying to try and watch
You have good information, but your bad audio makes it impossible to understand your instruction. You should consider redoing the entire voice over.
Thanks for the feedback. I have watched this on several devices both with and without headphones. The sound seems fine to me other than when wearing headphones and the sound only comes out of one ear. However it still sounds clear.
I do need to improve my audio as it has been up and down on some videos. For now I will see if other people have the same issue with this video before thinking of redoing it again.
Thanks