How To Disconnect VW Electrical Connectors (Also For Skoda, Audi, Seat, and other VW Group cars)
HTML-код
- Опубликовано: 27 июл 2024
- Content of this video:
00:00 Intro
00:40 About the "D" type connector
01:34 How to disconnect VW electrical connectors?
02:26 Common mistakes that you should avoid
04:10 Conclusion
__________________________________________________________________________
One of the most common obstacles when doing some repair on a VW group car are the electrical connectors.
The chances are if you don't know the correct procedure you'll probably end up either not taking it off or damaging it.
This video will try and show you how to disconnect VW electrical connectors and you'll see it takes only seconds to remove.
Visit us at our website despairrepair.com/ where you can find more useful car and driving tips.
Please like and subscribe, it's a huge help for what we're doing.
Thanks for your time and thanks for watching!
Music: www.bensound.com - Авто/Мото
Just what I needed. Thank you! Gotta love German logic: to pull it off, you need to push it in first.
Hi and thanks for watching! Yes in most cases, it's certainly worth admiring 🙂.
LIFE SAVER
Excellent demo. And now I know why it's called a D connector :-)
Thanks for watching!
From Iraq greetings and thanks for the useful advices you provide
👍🏼👍🏼👍🏼
Hi, thanks for watching and for the kind words!
Hope the video help 🙂
So simple, yet I had no idea. Thank you
You're welcome and thank you for watching!
Thank you for cooling me down 😂😂😂. It worked after that . Thanks again
1:34 The main point of the video should be that what is referred to as the "clip" must be pressed down before pushing and pulling the connector out !! Why does the video not emphasize the clip more? The "clip" is just mentioned in passing as if it has already been explained. The "clip" *is* the locking mechanism referred to at 1:15, but the appearance and position o f the "clip" on the connector was never clearly identified. The clip is what is pushed by the thumb at roughly 1:43 !!
Okay, tyou can sort of guess that fingers are pressing down after seeing more examples. but still the pressing down is not properly explained.
In general: The difficulty people have with connectors is always to know where the locking mechanism is and what one has to do to it to unlock it.
my friend how can i remove this the clip is broken by previous owner it’s to disconnect the connector on the coilpack cylinder 2 help please thank you
Hi, thanks for watching, and sorry for the late response!
You've probably already solved the problem but here's what I'd do: press the connector inwards and use a small flathead screwdriver to press the broken clip.
It takes some time and fiddling around but it should come off.
What is the clip is broken
Hi and thanks for watching!
In that case, I would try to prone the clip on the connector with a small flathead screwdriver, raise the clip, push it in, and then try to take it off.
Done that, tricky business and it takes time but it can be done.