Cost to Build a Classic Bobber - 1980 HONDA CB650
HTML-код
- Опубликовано: 8 июл 2019
- ENTER TO WIN THIS BIKE here: bit.ly/cb650bobber
Winner also receives an $810 set of Speed and Strength Riding Gear.
Wonder no more the costs to build a bike like this. In this video I go over all the essential parts needed and even the extra parts to make the bike fresh. The total cost for this build, cost of bike included, is $4,032.00
ESSENTIAL PARTS TO BUILD THIS TYPE OF BOBBER
1980 HONDA CB650 - $1200
POWDER COATING - $550
PARTS FROM TUCKER.COM
Bikers Choice 2.4 Gallon Fuel Tank #488799 - $125 - tinyurl.com/y6tf9p5x
Bikers Choice Petcock #489643 -$36 - tinyurl.com/y5fmgm63
LaPera Buddy Boy Solo Seat #499345 - $169 - tinyurl.com/y6fc7ye2
Bikers Choice Headlight #666809 - $69 - tinyurl.com/y4geky5t
EK Chain 530-SRX2 / Gold #571122 - $125 - tinyurl.com/y68zdg8k
MAC Exhaust #206198 - $480 - tinyurl.com/y2wdcqaq
Paughco Exhaust Builder Kit #590484 - $255 - tinyurl.com/y3j9xdkp
Performance Machine Elite Footpegs #PM3031 - $100 - tinyurl.com/y4xm8mfz
PARTS FROM VOODOOVINTAGE.COM
VooDoo Vintage Hardtail Frame Kit MK46 - $349 - tinyurl.com/yxmy34wr
PARTS FROM AMAZON
4” Long Seat Springs - $15 - tinyurl.com/yyaufnnj
Satin Black Gas Cap - $16 - tinyurl.com/yya7mffj
Carburetor Rebuild Kit - $36 - tinyurl.com/y246rjkb
PARTS FROM TCBROS.com
6” Wide Ribber Rear Fender - $100 - tinyurl.com/y67pg6sy
Weld-On Seat Spring Bungs - $30 - tinyurl.com/y3bw535u
Ribbed Rear Fender Mount - $20 - tinyurl.com/yyhmo6ro
Universal Fender Strut Kit - $30 -tinyurl.com/y53dyllp
Universal Rear Brake Switch - $14 - tinyurl.com/y6xt8dp8
PARTS FROM DIMECITYCYCLES.com
Faux Oil Tank - $75 - tinyurl.com/y2jvsx8y
2.5” Black Mini Speedometer - $75 - tinyurl.com/yxegnr27
48mm Red Pod Filters - $10 ea. - tinyurl.com/yxmg6u78
PARTS FROM LOWBROWCUSTOMS.COM
Miller / Vincent Tailight - $28 - tinyurl.com/yyoj8ser
PARTS FROM EBAY
7/8” Z Handlebars - $34 - tinyurl.com/y3f8774d
7/8” Vintage Handle Grips -$9 - tinyurl.com/yyf4ultl
7/8” Front Brake Master Cylinder - $24 - tinyurl.com/y3zhw4b4
EXTRA PARTS FROM TUCKER.COM
Motion Pro Throttle Cables #062173 - $19 / #062174 - $21 - tinyurl.com/y3ogagqq
Motion Pro Clutch Cable #062199 - $19 - tinyurl.com/y3ogagqq
Motion Pro Speedo Cable #062047 - $12 - tinyurl.com/y3ogagqq
Goodridge Brake Hose (34”) #036277 - $33
Kenda Front Tire (110/90-19) #287256 - $90 - tinyurl.com/yy4m8r3o
Kenda Rear Tire (140/90-16) #287250 - $118 - tinyurl.com/yy4m8r3o
ADDITIONAL PARTS
Wheel Bearings - Front and Rear - $45
Carburetor Intake Boots - $28
VHT Engine Paint and Primer - $30
Satin Clear Paint for Tins - $12
Bel Ray Fork Oil - BikeMaster Motor Oil - $23
BikeMaster Oil Filter - $6
NGK Spark Plugs D8EA - $12 (for 4)
Lucas DOT 3 Brake Fluid - $4
Bikers Choice Petcock - $36
TOTAL COST: $4032.00 
Развлечения
ENTER TO WIN MY NEXT BUILD FOR AS LITTLE AS $1. Plus awesome monthly giveaways. www.patreon.com/motopilot
You should've hand built more stuff on it instead of ordering it, would give it more character!
@@dylanjones1012 Doing the hard tail frame, sissy bar, rear brake assembly, footpegs and battery box pushed my limits as it is - lol. This machine has "plenty" of character....and soul.
@@MOTOPILOT6 indeed, love what you do tho man It's looking good, keep up the good work brother!
... @ MotoPilot , you mentioned guys. No women are qualified to win?
@@sopascat7 so sorry. It's just a general term i use. Would be super cool to have a girl rolling this machine. MP
Can’t wait to hear it fire up!
Look forward to seeing more vids of you working on the bike and getting it finished. Love to see and hear it run.
Truly an amazing work! Congratulations my friend not only you made an incredible functional bike, but a beautiful one!!
If you have a welder and your decent at welding and like to make your own stuff you can do all of this and some for around $400. Js..
Looking good 👍🏼👍🏼 As always can’t wait for the next video and possibly see this in my garage when you give it away.
Hi man I'm loving the bike build videos keep up the good work. I am a subscriber for the country Trinidad and Tobago
Dude your watch is slammin'!!
Love the bike looks really good wish it could be in my garage
Muchas gracias!!!
Tu vídeo ayuda mucho.
Saludos desde Guatemala ✌️
Nice to have an overview video of the build near the end, very curious about the final cost, great job till now! Keep it up! 🤙🏻
I'm about to put the final cost in the description. Check it out. MP
I am building a Suzuki S40 bobber now and I am right around $3600 to complete it. I have enjoyed the series and hope you make more.
ruclips.net/video/kYw6ro-KjZg/видео.html
Great video!
And there you have it...BRAAAAP
Awesome video dude. I’m thinkin about picking one of these up as a first bike. Not sure if I want to deal with making it a hard tail, but I really want a bobber, not a cafe racer.
1:59 that chain is guna slap against the oil tank while your riding !
Good channel bud.. keep it up an don't pay attention to the know nothings that know everything..thanks
Thumbs up for cutting off the soul patch 😂 ...the video was pretty good too
The soul patch was "awesome" - lol. Don't be surprised if it comes back one day.
Great video, bike is looking very cool, but I couldn't take my 👀 if your watch. What make is it ? It's a BEAST.
very nice bobber brother one love from Pakistan Red
Удачи тебе бро! Все здорово.
bravo !
I need to learn how to weld haha it would make chopping bikes so much easier 😅
I'm digging this look! Does this setup and kit work on a CB750 as well?
I still have my moto pilot stickers back when you had the old logo and you sent them out for free to pass out.
You rock
@ Moto Pilot im doing a goldwing 1100...any idea on a fork if i rake it out? what will fit? PLEASE ADVISE!
Hello
The hard tail that you bought, will it fit on a 81 Yamaha xs400 fram
The hard tail frame should work for the cb550?
Doyou have any woring diagrams? I have a 1980 cb400 im working on and i need help with the wiring please help or guide me to where i can find a diagram
Que buenos videos que subís a tu canal. Me encantaría llevarte mi moto para las modificaciones. Un saludo Grande desde Mar del Plata, Argentina.
Soy Hernán
Hola hernan Gracias por los amables cumplidos. Sí, las bicicletas personalizadas son divertidas de construir y montar. Mantente a salvo, hermano.
I realize that you ran into some problems with the build but I was wondering if you ever considered taking a bike that's uncool like a Hondamatic and making it cool looking ? Or even a moped or something like that ?
That chain is going to foul on fake oil tank
I picked up a 1978 cb750 in ridged frame. Almost all there wiring is jacked. Missing small stuff, all cables cut off. But I only had to pay 480.00. My new project. Work on it in spare time. Starts by kicker only
Sounds very cool.
Keep up the work you are doing.
Would that speedo work on a 94 Sportster?
Beautiful but chain looks like its gonna rub the faux oil tank
You have a keen eye sir. I plan to move the tank as far forward as possible.
@@MOTOPILOT6 lol thank u.. looks amazing cant wait to see her finished and running
@@jpolhamus71 Me too, bud. I'm so ready for the next build adventure.
Where is the custom sticker from?
Where is the video of sound?
Are you available for questions about jetting the csrbs and pods plz help
I’m actually not very knowledgeable. I got lucky that these carbs didn’t need tuning. I’m sure there are good videos on the topic. A bigger issue is using those type of pods. I did a video on how to modify them for better air flow. Check the playlist on my channel for this bike build. Made a huge improvement.
Here’s the pods setup video
ruclips.net/video/32FroNFKq2M/видео.html
What does it cost to use the metal fab facility?
It's actually my buddies. Not for rent. Sorry
Thanks for the reply, really liking the series. My point was that there is a lot not factored into the cost when you have access to all that fabrication equipment.
牛逼
Do you work for tucker rocky or are you a dealer?
He mentioned at some point in the past that he works for Speed and Strength. It's one of the exclusive brands distributed by Tucker here in US. So the answer is yes. Speed and Strength is actually owned by Parker Synergies based out of Canada.
@@skyusable Hubert...you are very very close. Yes I do work for S&S. But Parker does not own the brand. Parker was actually contracted out to run the brand. Marketing and design. But MAG pulled it from them and we brought it in house where I was already working for MSR. So now TR has the brand back and we are no longer under the MAG umbrella. At least this is the word I got.
See reply below...
Hardtail is radical ? Not in my opinion been riding hardtails for 32 years..... oil tank is cool great place for your dope !!!!!!!!
ruclips.net/video/kYw6ro-KjZg/видео.html
I've actually never ridden one. My lowered softail fatboy gives me a fairly rough ride. I can just imagine a hard tail ride. It's still a hard core ride.
MOTO PILOT I guess I’m just used to it doesn’t bother me at all my back is fine I also have 24 inch apes on it and run a suicide clutch and jockey shift with no front brakes. I have a 99 Electraglide but it just sits there because for me it’s not fun to ride I just took it off the rode but someday I’ll probably need it when I get older I’m 52 now . Be safe out there !
@@hardtailsuicidaljockey6827 gracias por pasar por mi canal
@@MOTOPILOT6 👍👍👍👍👍👍
Can you ship it to Nairobi Kenya😃😅 if i win
Sorry. America only
get this bike for frrrrrrrrrr ..... free????? 1:03 lol
Muy buen vídeo 👍 me a encantado el trabajo y el estilo, todo mi apoyo en su canal
ruclips.net/video/kYw6ro-KjZg/видео.html
You are going to have to move the oil tank...it's going to get hit by the chain .
Dude...u look like...lol forget it....
Keep on rollin vanilla ice