2016 Audi A6 3.0 Exhaust

Поделиться
HTML-код
  • Опубликовано: 10 ноя 2024

Комментарии • 17

  • @maxtorbstok
    @maxtorbstok Год назад +15

    gta san andreas neighborhood

  • @CT_SILVERnBLACK
    @CT_SILVERnBLACK Год назад

    Sounds good

  • @GregMiller-js2hm
    @GregMiller-js2hm Год назад +4

    Do you have video driving in the car at normal hwy speeds? Also some aggressive driving. Curious about drone etc. and if it is to loud inside the cabin. thanks

    • @avenhere
      @avenhere Год назад +2

      I straight piped my 3.0 A6 and rarely have an issue with drone. It can get slightly loud if you’re running sport mode on freeway speeds but it’s not an annoying sound. Gets super quiet in the cabin if you switch to normal drive

    • @Beanzy72
      @Beanzy72 4 месяца назад

      It's very easy to get these exhausts to drone. Most people don't acknowledge it, but my JHM exhaust is quite tame at most rpm except when cruising at 80mph at 2k rpm and while normal accelerating.

  • @axhiajro3940
    @axhiajro3940 9 месяцев назад

    Is it 2.25” or 2.5” inlet and outlet?

  • @ItsBig5ive
    @ItsBig5ive Год назад

    Car sounds good. What size are the tips 3.5”?

    • @fredvaldez5927
      @fredvaldez5927  Год назад

      BLACKHORSE-RACING 2.5" in 3.5"... www.amazon.com/dp/B07L57BBGS?ref=ppx_pop_mob_ap_share

    • @fredvaldez5927
      @fredvaldez5927  Год назад

      Yes...2.5" to 3.5" out

  • @patricmason9091
    @patricmason9091 Год назад

    Sounds great! Thanks for the video. Any inside drone?

    • @fredvaldez5927
      @fredvaldez5927  Год назад +1

      Very slight, that's why I did the rear magnapacks so that it will greatly reduce the resonance. It's still that family car and no one has said anything about it so it's working

    • @patricmason9091
      @patricmason9091 Год назад

      @@fredvaldez5927 man really appreciate the response. That’s exactly what im looking for, ima try to pull off this same setup. Thanks again

    • @fredvaldez5927
      @fredvaldez5927  Год назад +1

      @@patricmason9091 your welcome, I must have watched hundreds of vids regarding this and the one thing I couldn't find out was true details and visualizations of what people did. That's why I explained as well as show how I set mine up...I'm a huge Magnaflow fan so I just used their parts for how others have setup their exhaust...and it cost a fraction of what the catback systems were being sold out there.

    • @patricmason9091
      @patricmason9091 Год назад

      @@fredvaldez5927 yeah definitely thanks again for breaking your setup down. One last question, is the inlet/outlet supposed to be 2.5 inch or 2.25 inch for the Magnaflow resonator & mufflers? Would like to make sure before I order from Amazon so I can complete my setup in the next couple of weeks

    • @yzs4tony1
      @yzs4tony1 Год назад

      @@fredvaldez5927
      Can you please post a picture of the middle muffler installed if you have one. The guy at my shop didn’t think it would fit. I showed him the picture of yours partially installed from the back.(@ 32 seconds)Thanks again for the video.