Pt.2 Starter Rebuild For ATV's UTV's And Motorcycles At D-Ray's Shop
HTML-код
- Опубликовано: 17 мар 2017
- Troubleshooting and repairing an electric starter on your ATV, UTV, or motorcycle is easier than you think. Do it yourself and save some money! Thanks for watchin', Have a goodun'!
I am not endorsed, payed or compensated in any way by McDonald ATV for mentioning their products.
I created this video and I own all rights to all content in the video.
Music provided by : Jason Shaw://audionautix.com
Name of tunes "Big Blues Bed", and "Heading West" Jason Shaw (audionautix.com) Licensed under Creative Commons "Attribution 3.0" creativecommons.org/licenses/b... 
Хобби
D ray, your tutorials are awesome! Very thorough and clear from start to finish.
Wow I cannot believe this actually worked I’ve been struggling to start my bike for months now until I watched this video… #theRedNeckWay worked… big ups to you guys👊🏽👊🏽
like the armature in the drill press idea and the method of testing the integrity of the windings.
Thanks Tom!
Again thank you for the video. Very helpful easy to understand and follow.
Coming along nicely
Great video thank you very very much appreciate it I have a 2007 Yamaha Majesty 400cc starter I have to do I'm going to find that rebuilt hit hopefully someplace
Very well explained thank you guys 👍
Another great job from D~rays shop
Thanks Jeff!
Thanks again for a another great video 👍👍
just awesome thanks so much for the videos !!
Thanks Dan!
What if they are shorted to ground ... mine was working but hanging up .. cleaned it up bought new brushes ... now it will not work .. I placed a in line fuse to battery for testing and it blows fuse every time as soon as touching wires to battery.
Great vid, my starter spins on the bench but won't spin on the bike. Just clicks. Plus I show 6v at starter and have 12v out of solinoid. Grounds are .01.
This video was very helpful
The nose side sits in the engine oil? I don't think that's right. At least not on my bike. The manual says nothing about draining the engine oil before taking the starter motor off the bike
Good day sir, I have the same clicking issue. If I turn the main power stub on the starter ( 1/32'') it will then start the atv. Does this sound like a bad brush plate or is there a common fix for loose fitting? Thanks for the videos
Just a thought. You said you weren't going to change the one bushing cause it was good so you weren't going to dig it out. I'm not sure what you mean by dig!! I don't know if you know this little trick to get bushings out of a blind hole, but if you fill it full of any grease and then tap the shaft back into the bushing it will push the bushing right out.
Love your videos,
Oh ya, whats going on with the boat???
Brian
Thanks B! Yup used the grease and wooden dowel on many a pilot bushings back in th' day. The boat is still chillin' right now, got to get other stuff out of the shop first, Thanks for watchin' !
D ray help me out brother i got a 1995 suzuki quadrunner 4x4 i need rear axles for! could you steer me in the right direction
Great video. I put new brushes in my Armstrong 500 cc motorcycle, and now the starter is turning in the wrong direction! Any thoughts? thanks, Rob
Hooked up backward
I make bushing from nuts
got a $20 ct200 from the dump and it had mixed oil and water in the starter, would it be fixable?
Pitch only one way to find out
Do you ever need to use a "Growler test" on armatures?
I never do, usually a continuity test will do, if the windings are bad, I can tell by the dark color of the epoxy covering them. Thanks for asking !
Who carries McDonald ATV parts around Searcy area. Need a starter kit for trx 300 1999
Mcdonalds lol