How to Replace Inner Tie Rod 07-13 Nissan Altima
HTML-код
- Опубликовано: 8 сен 2024
- Buy Now!
New Tie Rod Set from 1AAuto.com 1aau.to/ib/1ASF...
New Tie Rod Set from 1AAuto.com 1aau.to/ib/1ASF...
1A Auto shows you how to repair, install, fix, change or replace a broken, busted, bad, or damaged tie rod. This video is applicable to the 07, 08, 09, 10, 11, 12, Nissan Altima.
🔧 List of tools used:
• Pry Bar 1aau.to/ofY/1AX...
• 14mm Wrench 1aau.to/omw/1AX...
• 19mm Socket 1aau.to/ooh/1AX...
• 21mm Socket 1aau.to/ooh/1AX...
• Inner Tie Rod Removal Tool 1aau.to/oh/1AXA...
• Locking Pliers 1aau.to/oaR/1AX...
• Pliers
• Side Cutters
• 1/2 Inch Breaker Bar 1aau.to/oiu/1AX...
• Socket Extensions 1aau.to/oTh/1AX...
• Torque Wrench 1aau.to/orL/1AX...
• Wire Ties
• Hammer 1aau.to/oiM/1AX...
For More Info visit us at 1aau.to/h/bQm/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Just replaced strut assembly to resolve clunking sound over bumps. Now I can hear a rubber squeak, like a hand on a ballon, when turning the steering wheel. This was not present before the new strut assemblies were installed. Help!
By the time you need this part you might as well buy everything in the front end because it’s all shot. Axles, lower control arms, sway bar links etc.
Did anyone notice that he didn’t use the washer for the bottom bolt. Is it needed or is it ok with the self locking nut alone.
Len is the greatest, He always makes it look so simple. I keep buying parts from 1A Auto for my Altima so long as I keep finding instructional videos. Thank you guys!
+Robbie R. Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
Great video it made it look so easy so I tried and was successful.
+bldyfinger Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
I got new boots with mine but the video was very helpful though thanks and God Bless 🙏
Does it matter in what position is the steering wheel (left, right, straight) when you remove the Inner TR or when you torque it down? Thank you for the film.
6:06. “I need more cowbell!” IYKYK
Hi, great informative video. Question? What causes clicking sound on a 2008 Nissan Altima? I've already replaced brand new cv joints on both side and brand new struts assembly kits on both sides and still clicking sound when steering is turned even when parked and steering turns I hear loud cluncking noise. What can this be?
its the driveaxle itself. Replace that and you'll be fine
Sounds like a steering rack issue if it's doing it while parked
Hey, thank you very much for this video it’s super helpful
Nice tutorial! one question, does that car need to be lifted up in the air to do this or can you just jack it up enough so that it's off the ground?
+Benny If you can easily access this area with your jack, you do not need the lift.
@@1AAuto thanks!
Thanks for being so helpful 👌🏽💯
There was no locking clips or washers holding the inner tie rod in?
Freaking awesome video... Also learned a trick or 2 from you my friend... Keep up the good work my guy.
Quick question: Why did you not re install the flat washer
Is the process exactly the same for 09 to 14 maxima? I never see professional level content for 7th generation maxima.
Thank you
If my inner tie rod ends didn't come with grease, what kind of grease should I be looking for?
Just replaced strut assembly to resolve clunking sound over bumps. Now I can hear a rubber squeak, like a hand on a ballon, when turning the steering wheel. This was not present before the new strut assemblies were installed. Help!
Same here using kyb assembly. Replaced control arms and nothing
is there a video for a 2014 Altima?
+Neida Ojeda We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c
Don’t you use a locking washer on the inside end?
How long between doing this do you need an alignment
Soon your tires will tell you everything they will become uneven on the sides without alignment then you’ll need new tires and another part
Dosnt the plastic tie will break in the future?
+HENRY ACCORD SPORT Thanks for watching! You should be able to source zip ties that are pretty durable, so you won't have to worry about failure for a while. You can also use metal bands if you don't want to use zip ties.
You forgot the washer on the end...
+Alex Fiore Thanks for the feedback!
Doesn't look like it had one. My 2006 doesn't have one either. Why I'm here
My car doesnt have them either and I'm pretty sure it's never been touched seeing how the car has 36,122 miles and it's a 2005
That’s why I’m here too. 2011 Nissan Leaf. Didn’t have a locking washer when I removed it but I keep seeing people use one on other cars. Will have to check with dealer.
You did not put a cotter pin back on there
Did anyone notice the rotor is facing the wrong direction? 🤣
hi quick question. hw many tie rods are on a 2013 Nissan Altima. Im guessing theres 2, am i correct? Sorry for asking.
+Martin Thanks for checking us out! There will be 2 inner and 2 outer tie rods. 1AAuto.com
bro forgot to put the cotter pin back in
what about the cotter pin ? lol
You forgot the cotter pin
+Dre Elite Thanks for the feedback!
those rotors are mounted on the wrong sides
+JustAnAverageBrad Thanks for watching! They are actually mounted correctly. Please check out this video for more info: ruclips.net/video/xFBUUAaYSOg/видео.html
No torque spec? Use your own judgement?? Are you kidding, that's a first.
I didn't see you use the safety clips
+Jose Esquivel These tie rods may have an updated design that uses a lock nut instead of the clips. Thanks for checking us out! 1AAuto.com
Next time show and identify the parts. You jumped into doing the job right away anddid not explain what to look for and if we even needed that part in the first place. Good videos but missed that today.
If you specifically looked up this video most likely you have the parts needed and this is just a how to video showing someone who IS replacing tie rods on this specific vehicle how to properly replace them themselves.