Nothing is nastier then black paint until a few years after new then plagued with swirl marks. I’ve had many black trucks and that’s why I won’t get my new GT in it
@@FYMM69 That’s because you didn’t get it ceramic coated after a paint correction. And if it’s swirl marks after a short time then you don’t know how to properly wash your paint.
@@mikehughes8023 well you’re right I’ve never spent the money on ceramic coat because I don’t keep my trucks longer than 6 months. I’d love to get a GT in black because nothings as gorgeous when it’s spotless. Is ceramic coating costly to get professionally done ??
@@Cyclopes00 I ordered a race red yesterday but I still want to change it to black. What’s this ceramic coating I see in a squeeze tube ?? Is it worth the time or money to do it
So glad I found you man... insanely good sounding 5.0 and I love the shifts! I was always scared about getting a Manual GT cause of the transmission but you're redlining that thing and it likes it!
good looking setup man, she hooking and booking. probably goes without saying, but just be extra careful if you ever get caught in the rain on those tires
Honestly the tire pressure that will work best has a lot to do with your suspension setup. On my foxbody i drove around at 35 psi and it ran the best at the track on 28 psi. My friends 3v worked best at 38 driving and 33 racing.
They are fine. I put 700 rwhp through my 2016 for a year and a half. I blew 3rd gear shift fork when I put a WOT box and tried a no lift shift with someone else's starter settings. The ignition cut was too short and I got locked out. If it weren't for that, the trans was holding up fine. I'm at 900 hp now though, and decided to do an autoswap for a number of reasons.
Hey bro, have you tested out the factory launch control on your MT Streets? If so, what launch rpm and clutch release method have you found works best? Thanks
I have a couple of quick questions for you 6speed. 1. Are you still on the stock clutch? If so, how many miles so far? 2. Did you upgrade your half shafts when you broke one a while back?
I like the drag setup 6speed! The lowering springs, coupled with the ET Streets give the car the perfect stance in the rear. Any plans to add the matching skinnies up front? I ran those tires on my 2013 GT and loved them. I drove on the street with them at 22 psi all the time and dropped to 17-18 psi at the track. I put about 4K miles on them and still hadn’t hit the wear bars, but I didn’t do long burnouts on them either (no need to), only quick hops to dust them off. Looking forward to seeing some footage of you snatchin’ on the competition down there in Mexico. LOL!
You would want a front skinny when running bias ply rear. If your alignment was good before switching wheels it was the same after .. the reason its swaying is because that’s how bias ply tires to especially when you are not running a front skinny
@@Real6speed awesome! Yea man its just a matter of time. I mean I'll dump it on the street but on a prepped track I haven't tried dumping it yet... but soon lol
I know it’s a little late but I’d run the tire about 20-25psi and drop it to 18 when you race and if you don’t hook decrees the psi by one till you find your sweet spot the last thing you wanna do it over inflate bias plys and ruin the center of your tire
with stock height, I believe you can go up to 315 or maybe a little wider, but i could be wrong. But you can definitely go wide, things really start getting tricky the lower the car is.
@@maxshaikhh99 bias ply are better for manual car. They wrinkle more absorbing some of the driveline shock and then spring back returning the energy to the acceleration.
What part of Illinois are you from? I live right over the border in Wisconsin. I have a 16 coyote. We should link up this summer we got a big scene up here.
Yo bro just a heads up with that soft of a sidewall the car will still sway left and right a good bit but nothing too bad. Missed your vids bro, i started watching right when you stopped posting lmao
Yo, I’ve got an idea for you. Keep making these videos and place a few more ads.(personally I wouldn’t mind them). Then Use the ad revenue to buy a supercharger or a twin turbo kit. It should take you a few months to get the money saved up. Then upload a video of the supercharger install and a few pulls. Would be straight fire content.
@@moisescristobal9740 i got caught slippin in my mickey street rs in my 5.0 on the freeway started pouring rain 1am... scariest shit even in 6th gear i was hydroplaning
Авто/Мото
Glad your back putting out these videos again. Missed you bro, be waiting for the next one.
thanks so much for your support man, means alot! More content is coming.
Black gt😍 im getting one eventually🤭
Nothing is nastier then black paint until a few years after new then plagued with swirl marks. I’ve had many black trucks and that’s why I won’t get my new GT in it
@@FYMM69 That’s because you didn’t get it ceramic coated after a paint correction. And if it’s swirl marks after a short time then you don’t know how to properly wash your paint.
@@mikehughes8023 well you’re right I’ve never spent the money on ceramic coat because I don’t keep my trucks longer than 6 months. I’d love to get a GT in black because nothings as gorgeous when it’s spotless. Is ceramic coating costly to get professionally done ??
@@FYMM69 it’s kinda expensive but definitely worth it in the long run
@@Cyclopes00 I ordered a race red yesterday but I still want to change it to black. What’s this ceramic coating I see in a squeeze tube ?? Is it worth the time or money to do it
It looks nice
Saw you driving on the highway
Was thinking about getting the same Mickeys. What are you getting for your 60 ft
I'm in chicago too. but where is the place you drive up and see willis tower at the beginning of the video
Just saw you on the road, just letting you know that you got a sweet sounding ‘stang
thanks a lot man! I appreciate it
So glad I found you man... insanely good sounding 5.0 and I love the shifts! I was always scared about getting a Manual GT cause of the transmission but you're redlining that thing and it likes it!
Man those are dope! Got skinnies on mine, really helped with weight and timings! 👌
Sickass vidz can’t wait for you to upload more 💯
What were the front and rear tire size of the white mustang?
Perfect 👌🏻👌🏻 congratulations 👏🏻
We're you been at weres the car at?
I'm feelin' that drag setup bro!
Mustang looking fresh 🔥👌🏼👌🏼 and the tires to
Badass look. Did the s550 body right huge respect. Car sounds fantastic too
Best 5.0 on RUclips glad your back with the videos bro sub since day one ✊🏽
Love tha vids, around how much a mouth do u pay if u don't mind
Love the car, the energy! You got a new member
First video I’ve ever seen of yours, and I can already tell you gonna be in my top you tubers, and you can drive like crazy! Clean shifts 🤌
that really means a lot, thank you and welcome to the channel man!
@@Real6speed do you have a Instagram? I would like to keep up with the build on there also if you have one
bouta look fire 🔥
good looking setup man, she hooking and booking. probably goes without saying, but just be extra careful if you ever get caught in the rain on those tires
yessir, thank you!
I never expected the tyres hook up that well. Great choice and keep up the good content coming👍🏼
thank you so much!!👌🏽
I’m new sub yo I love your videos bro you just different and understandable from the others keep up bro love it 💯👑
i really appreciate that, welcome to the channel brother💪🏽
Honestly the tire pressure that will work best has a lot to do with your suspension setup. On my foxbody i drove around at 35 psi and it ran the best at the track on 28 psi. My friends 3v worked best at 38 driving and 33 racing.
Your videos are sick bro and your intro is super dope im surprised you dont have more followers. Content is on point as well
One things for sure,,, you shifting the hell out of that stang!!!
Yessir lookin mean af 😈
I just got a ‘16 black gt im too geeked 🔥
wow congratulations man, have fun with your gt and drive safe 💪🏽
30psi usually for daily driving and probably around 20-25 psi for racing
setups dope i see a drag setup in the future for me lol
I appreciate that bro
There is a s550 for sale 2015 stick but I dont know if I should get it because the transmissions are ass😔
They are fine. I put 700 rwhp through my 2016 for a year and a half. I blew 3rd gear shift fork when I put a WOT box and tried a no lift shift with someone else's starter settings. The ignition cut was too short and I got locked out. If it weren't for that, the trans was holding up fine. I'm at 900 hp now though, and decided to do an autoswap for a number of reasons.
Hey bro, have you tested out the factory launch control on your MT Streets? If so, what launch rpm and clutch release method have you found works best? Thanks
Nice video. Your Mustang is amazing🔥🔥. Greetings from germany🇩🇪
wow, thank you so much!!!
9:27 favorite part of the video. Straight up HOOKS UP! Damn!! 😎
I would like to see that white 2020 Mustang more on your channel. By the way, what size rims were on the rear of his car, width wise.
Hey 6speed, did you install TPMS sensors in your Forgestars? If so, which ones did you install? Thanks
Dope damn I shoulda kept mine 🤦🏾♂️🤦🏾♂️
What gave you your 1.5in drop? That fitment on stock wheels and tires is fire!!!
I have a 2017 mustang GT PP as well.
Eibach sportline lowering springs
I have a couple of quick questions for you 6speed.
1. Are you still on the stock clutch? If so, how many miles so far?
2. Did you upgrade your half shafts when you broke one a while back?
turn the advance trac off too it cuts ur power from the digs
yoo im looking to get a 2019 manual gt how's the mt82 trans? or do you think I should look into the 10 speed auto
it all comes down to personal preference man, but the mt82 has held up great for me. I say go with what you’re more comfortable with.
11-17 stick 18 and up go auto
Been waiting for another vid 🥲🔥🌽
I like the drag setup 6speed! The lowering springs, coupled with the ET Streets give the car the perfect stance in the rear. Any plans to add the matching skinnies up front? I ran those tires on my 2013 GT and loved them. I drove on the street with them at 22 psi all the time and dropped to 17-18 psi at the track. I put about 4K miles on them and still hadn’t hit the wear bars, but I didn’t do long burnouts on them either (no need to), only quick hops to dust them off. Looking forward to seeing some footage of you snatchin’ on the competition down there in Mexico. LOL!
Love your vids! Want more content though! Weekly uploads would be great 👍
Finally back gotta keep the videos up this the meanest sounding 5.0
🐎 gang! Keep the 🔥 coming
You would want a front skinny when running bias ply rear.
If your alignment was good before switching wheels it was the same after .. the reason its swaying is because that’s how bias ply tires to especially when you are not running a front skinny
I have the same tires on my manual 2018 and I love them! How are you launching? Are you dumping the clutch or slipping it?
Dumping! Wbu?
@@Real6speed nice! I've always slipped it but im waiting on a RST clutch, driveshaft and axles so ill be dumping it from here on lol. What RPM?
like 4k-5k. It just depends, and im also looking into a new clutch and axles, I’m still on stock and i know it’s not gonna hold for much longer lol
@@Real6speed awesome! Yea man its just a matter of time. I mean I'll dump it on the street but on a prepped track I haven't tried dumping it yet... but soon lol
I've a 20' Mustang GT I need this...
But it's in the 10 speed automatic!
I know it’s a little late but I’d run the tire about 20-25psi and drop it to 18 when you race and if you don’t hook decrees the psi by one till you find your sweet spot the last thing you wanna do it over inflate bias plys and ruin the center of your tire
That’s bad ass man nice
Going krazy bro
It’ll hook harder with the traction control off off
Hook even harder when they’re heated.
I only redlined my car a few times watching this vid made me realize I don’t drive my car as hard as I should 😂
I said the same thing! 😂😂 I’m like I’m shifting to early!
what exhaust setup you running im tryna do long tube headers currently got steeda x pipe and roush axleback and do you rub on the springs?
Kooks 1 7/8 headers catted, x pipe resonator delete, flowmaster outlaw axle back. And no i do not rub on the springs. The fitment is perfect.
@@Real6speed your 5.0 is mean man earned a sub keep bangin gears you ever soflo we running it
Bro your car is just goals. How many miles are on it?
I like the D5s 🔥
Looks intense asf from that dig! Definitely liking the rims too! I ain’t gonna lie, a digital dash would set it off bro💯
not a bad idea bro🤔
I’m getting a s550 In a few weeks
congrats bro👍🏽
Hey bro, have you swapped out your half shafts yet ? Or still stock ?
still stock, but i plan on upgrading very soon.
Yo brotha how meaty can you go with stock height? I'm currently at 275 rear and 245 front but I wanna go wider
with stock height, I believe you can go up to 315 or maybe a little wider, but i could be wrong. But you can definitely go wide, things really start getting tricky the lower the car is.
Do you notice a change in gas mileage with the tires on ?
when u launch the car do u dump the clutch or slip it a little?
also, why do u have to get bias ply for manual cars?
@@maxshaikhh99 bias ply are better for manual car. They wrinkle more absorbing some of the driveline shock and then spring back returning the energy to the acceleration.
Oh and he's dumping at about 2750 rpm.
Bro my 15 mustang gt base model if I put headers and boma tune and JLT cold air intake can I beat a scatpack cuz my bro have 2020 scatpack
what headers are you thinking about getting? And also, i wouldn’t go with a bama tune. I recommend a lund tune or palm beach dyno tune.
@@Real6speed the buma tune is here now i dont konw what to do
@@OmarsMood get Lund or PBD.
Hell yeah 🔥🔥🔥🔥
Bro this intro 🤌🤌
you should make a video on how to downshift like you, mine arnt as good 😣
I have the same tire, 30psi daily 20 drag
What part of Illinois are you from? I live right over the border in Wisconsin. I have a 16 coyote. We should link up this summer we got a big scene up here.
Is it still stock if not what you running
What’s your exhaust setup ?
I would go 35 psi then drop it to 25.
why?
I drive my shit on 23psi no matter what it’s perfect enough to daily drive but it’s low enough to hook and book
I’m jus getting in cars and stuff , but why did u need a alignment like Ik it was off but why was that
Yo bro just a heads up with that soft of a sidewall the car will still sway left and right a good bit but nothing too bad. Missed your vids bro, i started watching right when you stopped posting lmao
ok cool, thanks for the advice bro!! More content is on the way
What 6speed in whiting indiana down the block from me nice set up👍🔥
what’s up man! Thank you👌🏽
Sheesh those mustangs and forgestars are sexy
I didn’t get the bias ply I thought they was gonna be to bouncy for daily driving
What camera are you using bro?
canon m50 mirrorless
GoPro hero 7 black
bro info on initial setup ?!
Yo 6 speed get with me on how to make intro for my RUclips channel! Pls.
Dude, relax your grip a little
We need more videos
Yessir🔥🔥
What year is your mustang ?
15
Meaty tires yessirrrr👌🏼🔥
You all set up now!
Yo bro can I know what the tire size and the wheels cuz I love the ones you have I want 2 in the back that’s it
D5 forgestar 17x10 wheel size
Mickey Thompson et street r bias ply(tire size is 28x11.50x17)
6speed yo brotha I got boma tune right and I got the customs tunes but should I run the 93 ghost or 93 race that’s my 2 custome ones
93 race
wwow the sound of your car....!!
What mods you got bro? You shifting at 8k lol
Yo, I’ve got an idea for you. Keep making these videos and place a few more ads.(personally I wouldn’t mind them). Then Use the ad revenue to buy a supercharger or a twin turbo kit. It should take you a few months to get the money saved up. Then upload a video of the supercharger install and a few pulls. Would be straight fire content.
Nice wit da mickie,,,, don’t get caught in the rain bruh...
These are street tires as well so they won’t be too bad on the rain
@@moisescristobal9740 i got caught slippin in my mickey street rs in my 5.0 on the freeway started pouring rain 1am... scariest shit even in 6th gear i was hydroplaning
What’s your Instagram bro and I’m definitely interested in seeing that 2020 Mustang GT some more!
@6.speed
@@Real6speed thanks bro and what’s your front tire setup looking like? Wheel & tire?
Back with another video ayeeee
more content? 😁
you know it😎
goodshit man
🏎💨
Bruh i thought you sold it for a while
neverrrr!!
You sound like dababy.
the only problem is that i cant rap
Cleanest 5.0 out there 🤝