Great video and very nice job too, The only thing I would do differently is, I would have stack drill and cut the slots for the hats, that way both sides would be identical.
I was thinking the same. It would be a good way to widen the design and ensure they are still somewhat lined up... Like if this turned into a fishing pole rack.
Cool. This might help me cause I have a lot of Blackhawks hat and I've lost 2 I the past month so this might help me keep track of them lol. I probably won't be wearing them anytime soon because we just got swept by the preds tho
Hey man. is the size of the hole at the end of each slot of any real consequence? why not use a hole the same diameter as the width of each slot so that each slot is just a slot with a curved end rather than that 'key hole' (for lack of better description) looking slot?
Great video! But why use spray adhesive for attatching cutting templates?? It seems messy, expensive and very smelly. I'd suggest using regular old glue stick or a tiny bit of woodglue. And if your project is really rough, just use staples. EDIT: Also, don't run big forstner bits so quickly! They'll cut much better at a slower RPM!
I could see spray adhesive being somewhat useful when attatching large templates. Also, I'd like to say your videos are great. You along with many other youtube woodworkers have inspired me to build my own projects. Keep on making things!
Eric Lindberg That's crazy to now find out about a RUclipsr my age that's given me lots of ideas to start becoming a handy man lives near me and plays hockey as well! I hope to make your Sauce kit this summer!
Good stuff man. Nice to see a younger person wood working. Keep up the hard work.
Great video and thanks for the free templates, criticism is good as long as it is constructive, keep it up, man.
Nice kid just what I needed to see to get back into woodworking 👌🏾
Keep it up! All of your videos are very good quality!
You-da-man on free handing the dowels. I've just started to try them and I'm definitely in the "use a jig" stage. Nice project as usual.
Very nice project Eric! I especially like the joinery!
Great job Eric ! Keep up the good work !
Another great project!
Nicely done very cool design and with the ebony stain it looks sweet.
dude you've got a fantastic shop but where is your vise? there was some major pucker factor when you were drilling out the dowel pockets
Great video and very nice job too, The only thing I would do differently is, I would have stack drill and cut the slots for the hats, that way both sides would be identical.
Thanks
I was thinking the same. It would be a good way to widen the design and ensure they are still somewhat lined up... Like if this turned into a fishing pole rack.
Good job man.
Great video!
Great video The only thing I need are the tools! 😒
elfather20 600.00 💰on tools
Cool. This might help me cause I have a lot of Blackhawks hat and I've lost 2 I the past month so this might help me keep track of them lol. I probably won't be wearing them anytime soon because we just got swept by the preds tho
Thanks, turned out great!
That is cool. Great idea for my hats too.
Awesome video🤙🏾🤙🏾
good idea eric! would make a nice gun rack too! good stuff as always man
Great job like!!!!
Making this tonight!
Good job
That is a lot of work, but looks amazing. No wonder they charge $80 online. The tools alone would cost a fortune to buy.
I LOVE it 💙
thanks man great video ;)
Nice one
Hey man. is the size of the hole at the end of each slot of any real consequence? why not use a hole the same diameter as the width of each slot so that each slot is just a slot with a curved end rather than that 'key hole' (for lack of better description) looking slot?
Are you from Michigan? Great video
EXCELLENT TRAVAILLE J ADORE
great job " GO BLUE "
Go Green!
Awesome job dude!
What did you use to drill the holes? A drill press? If so, which do you use?
Cool. I have more caps than i know to do with.
Nice vid buddy
Nice project only bad thing for me would be that I'd need about five of them for all my hats lol
Great video! But why use spray adhesive for attatching cutting templates?? It seems messy, expensive and very smelly. I'd suggest using regular old glue stick or a tiny bit of woodglue. And if your project is really rough, just use staples.
EDIT: Also, don't run big forstner bits so quickly! They'll cut much better at a slower RPM!
I could see spray adhesive being somewhat useful when attatching large templates.
Also, I'd like to say your videos are great. You along with many other youtube woodworkers have inspired me to build my own projects. Keep on making things!
To each his own, I prefer spray adhesive myself. Goes on easier and quicker, the type I use has no odor and no residue.
mesmerizing videos :)
Might have played you a few times in hockey after seeing your Knights hat.
Eric Lindberg I've played against Livonia my whole life. From when I was in Garden City, Westland, Canton, and Redford.
Eric Lindberg That's crazy to now find out about a RUclipsr my age that's given me lots of ideas to start becoming a handy man lives near me and plays hockey as well! I hope to make your Sauce kit this summer!
I've been thinking of making a hat rack and well you may have just sold me on yours - nice work keep it up - BTW what is your College Major?
awesome - keep it up and don't loose the drive -
what size hole saw did you use?
gun rack also?
What size bit ?
Hermoso trabajo, muy orginal y bien realizado, pero ¿qué opina tu madre de la ubicación en la sala?
Sorry, my english is very bad... Great job!
Nooice!!
😊
Next project cross cut sled? Instead of mitre gauge
Eric Lindberg I understand
Only criticism I have is the saw blade was way to high. Otherwise awesome job.
You can't say nooice. Nooice is my thing.
can't find where to download template. please advise
Where’s the link to buy this
So where are the free plans ?
Eric, how do i get the template?
How do I get a copy of the template
Hmmm. I don't see any L.A. Kings hats up there ;)
Eric Lindberg that's a good one I'll give you that lol. Good luck to your wings next year. Hopefully the team isn't too......... mild XD
but my dad doesnt have those tools man so i would just have to buy one
Only thing I would do differently is throw away that MSU hat and replace it with a nice Purdue hat. lol #BoilerUp
Go Green!!
That hat rack looks like my patent pending design. Check out my work.
Alguien en español
Good thinking but too much talking bla bla just show the things next time, anyway good job
Omg I'm dumb asf this not the video for me 😭😭😭
Next, make a fidget spinner!
Nice! However, the rack is for caps, not hats.
Sweet a 80 dollar hat rack I could save on by buying 1300 dollars of woodworking machines
Why did you make it so wide? You don't need that much space in between the hats, it made it look dumb