CSWP Segment 3 Sample Exam HD
HTML-код
- Опубликовано: 15 июл 2024
- This video shows what you need to know to pass CSWP assembly segment exam, and some tips for faster modelling
You can find another video of CSWP segment 3 here: • CSWP Segment 3 Sample ...
You can find PDF document and existing parts here:
grabcad.com/questions/cswp-se...
Answers
question1: 3444,87g
question2: X=95.68 Y=12.77 Z=-30.00
question3: X=96.04 Y=29.24 Z=-30.00
question4: X=91.09 Y=29.87 Z=-30.00
question5: 11,85deg
question6: 117,32g
question7: 358,19g
question8: X=79.20 Y=42.03 Z=-30.00
question9: Arm_Lower, Shock_Housing, Piston, Knuckle, Arm_Upper
question10: X=76.98 Y=44.04 Z=-30.00
question11: X=104.28 Y=37.82 Z=-54.23
Greatest tutorial series for SW I've come across. Nice job 👍
Amazing tutorial I must say!!
Thanks for your help. Easiest one to completely understand new things I was trying.
One of the best SW video i have ever seen in the past 10 years!! Kudos to you!!
Thank you very much, I am really happy to hear that.
Most helpful exam prep I've found.. (Passed this segment with 100% immediately after watching these videos)
I am really glad to hear that! Thank you for sharing your opinion.
thank you so much, I learned many tips from your video
This was very helpful. I had nailed the first two segments, watching only this video (plus years of actual experience) I was able to get a 190/190 on the 3rd segment. Certified! ;-) Thanks!
Congratulations on the certification! :) I am really glad to hear that you liked the video
Hi TurbineJesse could you please send ur exam model or questions as it will be helpful for me to clear the cswp exam
Most effective video I have ever seen. Thanks a lot, Bro.
I am really glad you liked the video. Thanks for your support!
I passed the exam. thank you
Great video, very well explained. Thank you so much!!!
lovely A Thak you, I'm really glad you liked the video!
Thank you Nikola :)
Keep up the good work bro!
+Mourad Mouelhi Thank you for your support my friend!
Mate you are a Legend! Great Job
Thank you, I'm glad you like my video!
Thank you again for another assembly segment. Answer for 5th qn differ by 0.01 for me. Thats all. I am consuming much time, about 1 hr to complete this segment, while you just finish off in 40 mins with explanation to the procedures. I think you might have completed your assembly segment for exam in less than 30 mins. Well i have to practise more atleast to break your 40min record😄😄
Helped a lot... Thanks
+donkasuncham You welcome! I'm glad to hear that!
Thank you Nikola!
Možeš li na srpskom da uradiš ovako nešto. Verujem da bi naši ljudi to gledali.
Svaka čast.
Hvala ti.
+milan petrovic Razmisljao sam na tu temu, tako da je moguce da cu napraviti i na srpskom u nekom buducem periodu. Mada opet, sa druge strane, mislim da mnoge termine iz SolidWorks-a i ne treba prevoditi (Template, Features, DesignTree itd...), pa ispada prakticnije na engleskom, pogotovu sto danas vecina ljudi zna nesto engleskog. Al videcu da ipak bude nesto i na srpskom.
Hvala na komentaru i predlogu!
Thank you. Was very hepful
Glad to hear that! All the best!
great work bro
Sohail Khan Thanks!
Thank you very much for the documentation.
Currently, I´m preparing for the CSWP, but it´s not easy to find samples about part of ensambles.
I am glad this helped. Good luck with the exam!
great video Nikola! Do you maybe have a video for segment 2 ?
Thank you. I haven't made video for segment 2 because you can find some good tutorials for free on internet for that segment. Back then in 2014 you really couldn't find complete tutorial just for segment 3 and thats why I decided to make these tutorials
For the real exam, are we required to create assemblies or download the parts to make assemblies?
Slažem se. Ovo sam napisao krajnje dobro namerno. Slučajno sam video da si napravio tutorijal. Razmišljam da i ja pokušam da polažem ispit.
+milan petrovic Jasno, jasno, tako sam i shvatio komentar. Ovo sam namenski uradio za jednog prijatelj, pa sam odlucio da podelim na youtube, moze da bude od koristi i drugima. Ako odlucis da polazes, srecno!
Hvala. Pozdrav
17:43
I have question, how did you get the deg of the draft in the circle boss extrude? because on the drawing, it only mention '105.00deg', if follow this dimension, should use revolve?
Other question, i follow your procedure, and checked very dimension are match, but the mass at last was '3443.39' , different with yours, may u give suggestion, where was the wrong?
I was busy last days, I couldn't answer immediately, sorry.
1)Deg of the draft is simply a deviation of the edge from the vertical line, so i calculated 105 - 90 =15 deg. You can use revolve if you want, of course. The way i modeled this isn't the only way, it's just suggestion, or directive.
2)If you are sure about all dimensions, only two things come to my mind. Check if material properties are the same as mine. It is also possible that this mismatch appeared because you have different version of solidworks, so software calculated it differently.
Thanks so much!! i also watched your another video, love it.
I am using education version 2015, i have understood what your mean.
SOMEBODY HAVE THE ANSWER FOR THE EXMANS SEGMENT #2... OR THE VIDEO.. I DO NOT FOUND IT.
I WILL TAKE THE EXAM THE NEXT FRIDAY.
Bacite pogled na moj blog
+milan petrovic Interesantni i kvalitetni modeli na blogu, veoma lepo. Posebno mi se svidjaju realisticne slike pojedinih modela