Yes, I’m watching the episode again. The camera issue you’re having can be fixed by creating a small pendulum. I use thin copper wire and a very small fishing weight for this. Make sure the camera is secured tightly to the frame or canopy, but leave just enough looseness to allow slight movement between the camera and its mount. Don’t use too much weight, with all the high G maneuvering, the pendulum would probably tear the camera off. Attach the pendulum you made to the camera or module, as far from the hinge (pivot point) as possible to maximize leverage. When installed correctly, the pendulum will help the drone move around the camera, keeping the camera in its set position as the drone moves. If anyone has trouble making this work, get a library card and grab a book! Or, if that’s not an option, let me know and I’ll help you figure it out. Thanks for the video!
It makes sense that Caddx made his own cinewoop, no walksnail option for this drone. Speaking about the battery, I would try a 450 or 550, maybe it flies the same amount of time but it flies better due to the weight. 👍
DJI never makes new products backwards comp until they sell enough of the new product. Wait 6 to 12 months and the backwards compatibility will arrive in firmware updates.
Fun little fpv drone! Looks like a blast to fly. The playground you are flying at looks like it's straight out of a simulator. Great stuff! Thanks for the video!
Excellent video as always. A few questions…. I ve been flying R/C planes and a few helis for just over 30 years. I just recently stepped into the FPV drone arena with the purchase of the Aquila 16. It took a few flights to get accustomed to the headset and nuances of the controller. I think I will outgrow the Aq16 in the next week or two. The questions: 1. Would you consider the Talon a good next step from the Aquila 16 or are they too similar in flight time performance? I would like longer flight time and range with better imaging. 2. As the level of drone goes up , does one have to provide their own transmitter and headset (goggles)? If so, is it possible to have one transmitter to cover multiple aircraft if all are same Tx/Rx protocol? 3. I’ve only ever used Futaba or Airtronics radios to control my various aircraft. I have not seen a new Airtronics Tx in forever but I see Futaba all the time. Is Futaba a relevant controller for drones? Lastly, at what level drone is it possible to start customizing (ie, motor changes, rotor mods,sorry- propellers), etc). Thanks for your time. Any input will be greatly appreciated.
Futuba is not popular in the FPV Drone hobby, but Radiomaster and Jumper are as well as TBS Crossfire (Tango II). In the FPV hobby you buy your own goggles and radio, batteries and RC hobby charger. Then you buy FPV drones compatible with your gear. This is why FPV drones come with different camera options and different receiver options.
Thank you very much for this video! can you switch between using elrs and the dji fpv controller 2 by just changing some settings in betaflighy without having to solder?
Sometimes. It all depends on if the DJI O3 is fully connected. Then you can usually get away with changing settings in Betaflight Configurator…. But you really need to know which settings as all drones are different
Hey I’ve been saving up to a dji avata, but I just realized that it’s over 250 g so I’ve been looking, searching for different quad goggles and, a bunch of other thing. Well I came across this vid and I’m very interested in this HGLRC talon but I don’t know what does it mean when it says. Material “ ELRS or crossfire nano” like is it what controller can it connect to, like the radio master pocket.
The FPV hobby is called the Advanced Drone hobby for a reason. It take incredible skill to fly an FPV Drone that has no beginner features, like the AVATA, and worse it takes a massive understanding of how things work together as again, there is no simple beginner system. To gain some knowledge, you could always watch my video series entitled CAPTAIN DRONE FPV FOR BEGINNERS on RUclips.
Weaning myself off DJI and jumping into the FPV hobby proper. I'm waiting for a Nazgul Evoque F5 V2 03, so I can still use all my DJI stuff. This little fella looks great! Cheers, Steve!
Nope… no difference in stability. 5 blades are usually placed on motors that can handle them as they require a bit of motor power to spin them up instantly to give thrust.
Hi Steve, Great video and love the quad. If I purchased the Analog version, how difficult would it be to replace the VTX and Camera with the O3? Thanks.
Hey captain drone! I’m just barely getting into “FPV” but I need huge help right now. I’m so bad at figuring out how to charge LiPo batteries. More exact, “2pcs Explorer 900mAh HV 15.2V 80C 4S1P Lipo Battery Pack - XT30” please let me know how to charge these with a hub and what hub to use. And if it isn’t to much to ask, is the DJI FPV control V2 good. * btw this is for the Cinerace 20 v2. The neon green one. Please lmk when u can. Ty. ( and if it’s compatible with the DJI FPV control v2 )
Man I am enjoying my mobula 6 eco 2024 it took me about a week to learn how to flash the receiver and and the transmitter I had to email joshua for help
Yup, Banggood sets the countries. I’ve asked them to add CANADA to the code. If they do, then it will work tomorrow. I honestly have not control over which countries get a discount or by what amount. I simply request a discount for viewers & one is provided.
Hi cap, I have a question for you. How loud is it compared to the stingerBee. Also can I buy the analog version and upgrade it with the 03 air unit I already have or do I also need to change the flight controller for using it with my 03 air unit?
Hi Steve, I have some quick compatibility questions. Integra goggles I think OK , DJI fpv2 transmitter no go? Not sure if Yellow Jumper 2 is the right protocol maybe with the correct module ? It is pretty dated .Been flying for years but transmitter protocols confuse me.Really like the Talon. Any thoughts? Thanks
Integra goggles will work with the DJI O3. DJI Remote 2 will probably not work because they don’t offer a NO RECEIVER option, and the ELRS RECEIVER is part of the Flight Controller so I’m not exactly sure how to get around that. You could do like me and get the ELRS Radiomaster Pocket.
Ugggg... Banggood sets the countries for the coupon. They often leave out countries like Canada and I never know it until someone tells me. I'll ask them if they can add Canada, but no guarantees.
@@CAPTAINDRONE798 hi again thanks for the info, can you tell me what one should i get ie the controller (RadioMaster POCKET Radio Transmitter Controller EdgeTX CC2500 ELRS Mode 2) which Protocol: ELRS 2.4G or the CC2500 (FrSky/Futaba etc.), thankyou in advance
@CAPTAINDRONE798 I'm a fpv pilot but all my gear is 5 years old. I've been behind on the new fads I figured with new HD cams for analog we could finally record with them now.
@@PhuckenTacozYes, but ANALOG is prehistoric in picture quality so no one records good video with them. Instead they record with an external camera like a 4k or 5k GoPro, or they simply buy a drone with a digital camera.
Yes, I’m watching the episode again. The camera issue you’re having can be fixed by creating a small pendulum. I use thin copper wire and a very small fishing weight for this. Make sure the camera is secured tightly to the frame or canopy, but leave just enough looseness to allow slight movement between the camera and its mount. Don’t use too much weight, with all the high G maneuvering, the pendulum would probably tear the camera off.
Attach the pendulum you made to the camera or module, as far from the hinge (pivot point) as possible to maximize leverage. When installed correctly, the pendulum will help the drone move around the camera, keeping the camera in its set position as the drone moves.
If anyone has trouble making this work, get a library card and grab a book! Or, if that’s not an option, let me know and I’ll help you figure it out.
Thanks for the video!
Great video, curious how it compares to the Cinelog20.
It makes sense that Caddx made his own cinewoop, no walksnail option for this drone. Speaking about the battery, I would try a 450 or 550, maybe it flies the same amount of time but it flies better due to the weight. 👍
the footage is so clear
Excellent Tutorial Review Video On The HGLRC Talon FPV Drone. Beautiful FPV Drone. Thank you Captain Steve.
Hi Cap'n! Could you please do a review of caddx goflim 20?
Thanks, you always give the info that's needed to make a cash decision
Great location to fly, great footage.
I wish Dji would make their goggles 3 and fpv controller 3 (for avata 2) downward compatible to fligh O3-drones like these
DJI never makes new products backwards comp until they sell enough of the new product. Wait 6 to 12 months and the backwards compatibility will arrive in firmware updates.
Thank you for the video and the information your friend in Ontario Bob
Fun video ! 😃
Great review on a cool quad!!
woo, maybe i should take this one as my second indoor drone...
l really love 250g 4s drone.
You should try the analog one
Excellent video, Thank You
Always great information can't wait for next video
Fun little fpv drone! Looks like a blast to fly. The playground you are flying at looks like it's straight out of a simulator. Great stuff! Thanks for the video!
Looks insane
awsome video Captain
You should do a flight time test,, (using the 650ma battery) flying slown a cosy ,,,,most beginners would crash if they did try to fly like you do ;o)
Excellent video as always. A few questions…. I ve been flying R/C planes and a few helis for just over 30 years. I just recently stepped into the FPV drone arena with the purchase of the Aquila 16. It took a few flights to get accustomed to the headset and nuances of the controller. I think I will outgrow the Aq16 in the next week or two. The questions:
1. Would you consider the Talon a good next step from the Aquila 16 or are they too similar in flight time performance? I would like longer flight time and range with better imaging.
2. As the level of drone goes up , does one have to provide their own transmitter and headset (goggles)? If so, is it possible to have one transmitter to cover multiple aircraft if all are same Tx/Rx protocol?
3. I’ve only ever used Futaba or Airtronics radios to control my various aircraft. I have not seen a new Airtronics Tx in forever but I see Futaba all the time. Is Futaba a relevant controller for drones? Lastly, at what level drone is it possible to start customizing (ie, motor changes, rotor mods,sorry- propellers), etc). Thanks for your time. Any input will be greatly appreciated.
Futuba is not popular in the FPV Drone hobby, but Radiomaster and Jumper are as well as TBS Crossfire (Tango II). In the FPV hobby you buy your own goggles and radio, batteries and RC hobby charger. Then you buy FPV drones compatible with your gear. This is why FPV drones come with different camera options and different receiver options.
Maybe a 3S would slow it down to explore?
Thank you very much for this video! can you switch between using elrs and the dji fpv controller 2 by just changing some settings in betaflighy without having to solder?
Sometimes. It all depends on if the DJI O3 is fully connected. Then you can usually get away with changing settings in Betaflight Configurator…. But you really need to know which settings as all drones are different
Nice 1 Steve
I like the footage
Show de bola hein, já chegando e deixando aquele like, curto muito drones Fpv e esse modelo me parece ser muito bom, forte abraço 😃✌🏽
Always good videos🎉
Really great video nice drone I like the set up
@CAPTAIN DRONE can you also review the analog version of the Hglrc Talon.
Probably not as it can be EXTREMELY expensive for a person on RUclips to continously buy products to review.
Do they make a smaller model only w/gimbal 4 camera?
can you pls revew the eflite trojan 2m
Came in cause I wanted something to fly.
Stayed when I realized we're pretty much neighbors. xD
I am in love with this drone. Thanks for reviewing it. I will ask Santa for one😂. 👍👍
Hey I’ve been saving up to a dji avata, but I just realized that it’s over 250 g so I’ve been looking, searching for different quad goggles and, a bunch of other thing. Well I came across this vid and I’m very interested in this HGLRC talon but I don’t know what does it mean when it says. Material “ ELRS or crossfire nano” like is it what controller can it connect to, like the radio master pocket.
The FPV hobby is called the Advanced Drone hobby for a reason. It take incredible skill to fly an FPV Drone that has no beginner features, like the AVATA, and worse it takes a massive understanding of how things work together as again, there is no simple beginner system. To gain some knowledge, you could always watch my video series entitled CAPTAIN DRONE FPV FOR BEGINNERS on RUclips.
Hello from Rhyl North Wales 🏴
Hello North Wales!
Is it worth waiting for DJI O3 Bnf's?
Weaning myself off DJI and jumping into the FPV hobby proper. I'm waiting for a Nazgul Evoque F5 V2 03, so I can still use all my DJI stuff. This little fella looks great! Cheers, Steve!
Hi steve great video, i have a cuestion: 5 blade are more stable than 3 blade??
Nope… no difference in stability. 5 blades are usually placed on motors that can handle them as they require a bit of motor power to spin them up instantly to give thrust.
@@CAPTAINDRONE798 I appreciate your response, thank you very much.
Is that the first sighting of Tractor Man this year! Another great video Steve keep them coming
First sighting of “mini-tractor man”
Does the Talon have gps
I have the DJI goggles V2 and the the remote controller 2. is it compatible with this drone?
Only the Goggles. You would need a PNP Version of this drone in order for your remote to be compatible out of the box.
@captaindrone would you suggest this or the flywoo flylens 85
This one. I found the flylens to be very fragile.
Hi Steve,
Great video and love the quad.
If I purchased the Analog version, how difficult would it be to replace the VTX and Camera with the O3?
Thanks.
Very easy as the design is very modular (just remove bottom screws).
Thank you.
does it hover easily; that is, if I let off the throttle will it hover like a camera drone..
No. No FPV Drone does that unless it is a beginner drone with optical flow on the bottom or a DJI drone.
Hi, may I ask which module is below your Radiomaster Pocket?
ELRS
Hey captain drone! I’m just barely getting into “FPV” but I need huge help right now. I’m so bad at figuring out how to charge LiPo batteries. More exact, “2pcs Explorer 900mAh HV 15.2V 80C 4S1P Lipo Battery Pack - XT30” please let me know how to charge these with a hub and what hub to use. And if it isn’t to much to ask, is the DJI FPV control V2 good.
* btw this is for the Cinerace 20 v2. The neon green one.
Please lmk when u can. Ty. ( and if it’s compatible with the DJI FPV control v2 )
Watch this and take notes:
ruclips.net/video/5etSyHokb6Y/видео.htmlsi=fnVl4gobDuGAq6Y4
@@CAPTAINDRONE798 thank you I will!
@@CAPTAINDRONE798 I just finished watching that and omg so helpful! Now i know i need a 850 mAh and a smart charger. Thanks so much.
@@CAPTAINDRONE798 btw do u know of a smart charger that is good and around 40$? If not I’ll just get the blue one
Man I am enjoying my mobula 6 eco 2024 it took me about a week to learn how to flash the receiver and and the transmitter I had to email joshua for help
Holy Crap… Joshua responded to your request? Frame that! 😂
Welcome to the FPV hobby. I can tell you that one never stops learning in this hobby.
BG coupon does not work in Canada: "This coupon can only be used in United States,United Kingdom,Australia"
Yup, Banggood sets the countries. I’ve asked them to add CANADA to the code. If they do, then it will work tomorrow. I honestly have not control over which countries get a discount or by what amount. I simply request a discount for viewers & one is provided.
Amazing video as usual! I mean, I'm watching it in school so
Watch out... The teachers coming!
Hi cap, I have a question for you. How loud is it compared to the stingerBee. Also can I buy the analog version and upgrade it with the 03 air unit I already have or do I also need to change the flight controller for using it with my 03 air unit?
I never compared the two for prop noise. Yes cameras are usually interchangeable however you may have to set the UARTS correctly
This drone can work with R12SdS?
Also Is the drone FCC or LBT or other Because I don't know if a TX12 would work thanks
TX12 will work as long as your TX12 is ELRS 2.4
Hi Steve, I have some quick compatibility questions. Integra goggles I think OK , DJI fpv2 transmitter no go? Not sure if Yellow Jumper 2 is the right protocol maybe with the correct module ? It is pretty dated .Been flying for years but transmitter protocols confuse me.Really like the Talon. Any thoughts? Thanks
Integra goggles will work with the DJI O3. DJI Remote 2 will probably not work because they don’t offer a NO RECEIVER option, and the ELRS RECEIVER is part of the Flight Controller so I’m not exactly sure how to get around that. You could do like me and get the ELRS Radiomaster Pocket.
@@CAPTAINDRONE798 Great , thanks for the info.
By the way your Banggood coupon is not good for Canada! Are you not Canadian ?😊
Ugggg... Banggood sets the countries for the coupon. They often leave out countries like Canada and I never know it until someone tells me. I'll ask them if they can add Canada, but no guarantees.
Thank you.
hi there steve, what controller do you use with it ?? from Australia Brisbane
Watch the start of vid where it says. MY GEAR
@@CAPTAINDRONE798 hi again thanks for the info, can you tell me what one should i get ie the controller (RadioMaster POCKET Radio Transmitter Controller EdgeTX CC2500 ELRS Mode 2) which Protocol:
ELRS 2.4G or the CC2500 (FrSky/Futaba etc.), thankyou in advance
@@shanesstuff1321beginners enjoy this one: ruclips.net/video/GgaWMvAHZi8/видео.htmlsi=pFhVTYFp6VfleNDq
@@CAPTAINDRONE798 thankyou so much for replying
Súper 😎🤝
So what's the camera recording with analog?
FPV Pilots don’t record video with analog cameras
@CAPTAINDRONE798 I'm a fpv pilot but all my gear is 5 years old. I've been behind on the new fads I figured with new HD cams for analog we could finally record with them now.
@@PhuckenTacozYes, but ANALOG is prehistoric in picture quality so no one records good video with them. Instead they record with an external camera like a 4k or 5k GoPro, or they simply buy a drone with a digital camera.
@CAPTAINDRONE798 thanks for the information! Maybe one day someone will learn how to make DJI technology more accessible to the little guy
5mins has made me think 🤔 poss swerve 🏀
awesome vid but 400+ $ is rough
$400 US is a normal price for a modern FPV drone with a DJI O3 Air unit. FPV Drones are expensive.
Very Good Videó 😁😁 Thanks for Sharing My Friend 😁21. Big Like From in Hungary-Debrecen City 🫡😎
Hello Hungary-Debrecen City!
🙂❤👍
Dji mini 2 se
Decent video but it's ruined by the awful repetitive music 👎👎👎
Music? There is no music in this video. Perhaps you were hearing my awesome humming 😁