FJ40 Build walk around
HTML-код
- Опубликовано: 27 авг 2024
- #fj40 #landcruiser #toyotalandcruiser
Full FJ40 build details below at bottom:
Go Here to see the Shovels:
Use code at checkout for 10% off
LC4x4
agency6.com/co...
Subscribe to see the bronze accessories go on the 200 Series Land Cruiser
If you want the ActionTrax or Car cover, just reach out to me at
Cruisingtheland@gmail.com
All other cool gear can be found with links and discounts here:
Tool roll bags, Rosen Visors, Fast Air up compressor systems and more:
linktr.ee/crui...
-Vortech 5.7L with 50k miles from donor. Fuel injected with updated fuel injectors, painless wiring harness. 300hp off road tune. Rams horn shorty headers. Custom air intake. 145 amp alternator. Oil pan skid plate.
-SM465 4 speed manual transmission with recent rebuild
- New OEM fuel tank
- FJ80 Master cylinder, Stainless steel hard lines throughout. Manual brake bias adjuster.
-New Best Top soft top and doors.
-Bikini Top
-Un restored hard top, short barn doors, and Steel doors all in decent shape available if requested
-5 New tires Maxxis Trepadors 40x13.5R17 Bias ply
-5 New Raceline 7x8.5 beadlock wheels
-Warn XD9000i winch
-New synthetic winch line and Hawse fairlead
- Metal tech 4x4 front fenders with uncut skirts
- LED aux driving lights with integrated turn signals
-LED Headlights
- Tuffy center console with radio and all accessory switches built in
-Metal Tech 4x4 full family Roll cage with integrated front seat cradle, grab handles and oh sh#t bar. Tied into frame in 4 locations
-Man A Fre rear bumper with swing out cooler carrier and spare tire mount, 2 inch receiver.
-Comes with Yeti 45 cooler barely used
-LED reverse light wired for reverse activation and switch operated
-LED tail lights
-Custom exhaust tucked up high with Flowmaster mild muffler
- Aqualu aluminum body, front cowl and windshield with lockable tailgate
-Rhino lined color match interior, underbody and engine compartment.
- 3 coats of heavy clear to allow buffing of scratches
-PRP heated racing suspension seats with lumbar and slides on both sides
-New 5 point harnesses with quick 1/4 turn release
-Auto meter full gage set
- New Orion 4 to 1 transfer case with disc parking brake and twin stick shifter
- AA transfer case mount
- Custom built Toyota CV drive shafts front and rear
- Rear suspension heavy duty anti wrap bar with Johnny joint and shackle to allow full suspension movement
- FJ80 4.10 rear full floater axle with disc brakes, new calipers and pads. Factory locker with custom built cable actuator. Welded differential bash guard.
-Fj55 rear 8 leaf springs for rear springs
-Fj60 5 leaf rear springs for front springs
-Custom front Shackle reversal in frame
-FJ60 4.10 front axle widened 3 inches, cut and turned for 10 degrees of caster with axle brace moved to the top for clearance. Full Longfield cryo birfields and shafts. Cryo locking hub internals. New 4 Runner upgraded 4 piston front calipers. Aussie lunchbox locker. Welded Knuckle brace tabs and steering stops. Recent Knuckle seal reseal. High steer kit with New HD heim joints and double sleeved tubes. Full coverage front diff cover bash guard.
-Mastercraft nylon Limiting straps front and rear
-14" front Bilstein 5150 reservoir shocks with custom hoops and
-12" Bilstein 5150 rear shocks
-PSC hydro assist steering box, high pressure pump, ram, cooler and reservoir. One finger steering in the rocks. Almost normal feel on the street.
-Flexalite Black Magic electric fan on an immaculate original radiator.
- Tilt telescope steering column with hd steering shaft and grant leather wheel.
-Cage mounted 5ft highlift jack with a lift mate in the recovery bag
- Full and complete recovery bag, Warn 3" tow strap, tree saver, snatch block air compressor etc.
-Extended Poly bump stops front and rear
- Metal tech front radiator hoop and stinger
-Metal Tech Rock sliders
-Full boxed frame
-Tacoma Dual diaphram brake booster
-etc.
dude I can't wait to save up enough to buy one of your cars from you
That is a wicked FJ40!!
Beautiful fj40 blessings
That rear bumper is techically a 4Plus. Man-a-fre just resells them.
Ahh..Good to know.
Hey man, been following you for a few years or so now on YT and IG and thought I'd drop a comment. I managed to snag a Moonglow Pearl, triple locked 1995 FZJ80 about a year ago and have been loving wheeling it and building it! Got it pretty much stock and now I'm 100% going down the rabbit hole. So needless to say, I love your OTIS build. I believe it was the first vid I found of yours. Such a rare color to see these days! Although the California sun has massaged half of the clearcoat off of mine at this point unfortunately, haha! I'm from San Diego, would love to catch you at a cars and coffee sometime.
Hey Colin! Nice a Moon glow pearl. Sometimes you can wet sand and apply a new clear as a quick fix. Love that color, that's one reason why Otis is a Keeper.. and 3x locked.
I do head to Cars and Coffee San Clemente, but next one will likely be Jan 2024.. You should also come out to a YotaNights in Anaheim.
This is the rig dreams are made of! My FJ40 build is on its way to this level but lots to do. Just had my rear pumpkin blow up, so now I'm thinking about a total overhaul (new axels, suspension, leaf springs, etc. Any suggestions on the best place to go for advice/research?
Where are you located?
you can also message me at cruisingtheland@gmail.com
It looks like those rear AI shackle pins are very close to hitting the spring on compression?
- Rear suspension heavy duty anti wrap bar with Johnny joint and shackle to allow full suspension movement
Love this rig, one question can you tell me what the bottom door sill measurement to the ground is thanks @adventure-101
I like the allimium body do they make the long wheel base wagon too an alli body would be 👌and that 40s a beast 👍
yes Aqualu makes the longer wheel base.
Hey Jamie what brand are those car covers? My friend needs one for a 2007 Mustang. I think the ones iin your link tree would be too big. Or can you make a recommendation on where she can get one?
sorry, I only specialize in the Land Cruiser ones!
@CruisingTheLand I get that. Just didn't know if you knew of the brand because of the good luck you have had with them was all. Gonna get one for my Wife's 200 when I have to kick it out of the garage when we start the build on the 80 series.
I’m putting a 5.3 paired with a sm465, installed 60 series axles on 37’s, was wondering what kind of hwy speeds to expect? What does your cruise at normally on the freeway? Thanks
also pretty sure it’s stock gearing at 3.70. Tia
who built that 40?
Just curious why not the toyota 5.7 v8?
This is way easier and smaller
and mates up to a SM465 trans.
Manual!
What wheel base ?
Its FJ40..