How to Replace Cabin Air Filter 2011 Ford Explorer
HTML-код
- Опубликовано: 25 авг 2024
- Purchase this filter at: filterheads.co...
Verify that your vehicle has a cabin filter before purchase.
AQ1153 filter fits:
Ford Explorer 2011 - 2017
Ford Flex 2010 - 2017
Ford Police Interceptor Sedan 2013 - 2016
Ford Police Interceptor Utility 2013 - 2016
Ford Taurus 2009 - 2016
Lincoln MKS 2010 - 2016
Lincoln MKT 2010 - 2016
The model shown in this video is a 2011 Ford Explorer but installation is similar on the others models.
Timestamps:
00:02 Filter location
00:50 Remove old filter
00:58 Install new filter
Purchase this filter at www.filterheads.com/i-301-aq1153-cabin-air-filter-particulate-media.html
Verify that your vehicle has a cabin filter before purchase.
It's so weird how every video has dislikes even when there's nothing wrong with the video. This video is perfect. What's wrong with people?
The video is great but if you don't know what you are doing, just so you know $390 for new glove box. I broke the tabs and glove box would not close after successfully replacing filter. That might be why there are dislikes.
That's easy, it isn't the video we dislike, it is FORD making it RIDICULOUSLY difficult to do something that should be incredibly easy. IDIOT engineering.
To many idiots on drugs. We need to clean house. They cost us to much money.
He’s got his bitch mittens on is the only problem I saw😆😆
Exact same set up on a 2017 ford explorer. Thanks for the help!😊
You're welcome!
Tremendously helpful video, thanks. I'd never have figured this out on my own.
It is a bit hard to see on your video, but your old filter has the printing right side up, and the air flow arrow pointing down, which correctly shows the direction of the air flow. My OEM filter, which came with the vehicle, has the printing the right way up, but the arrow points up (which is incorrect(!)) as the air flow on my vehicle also flows down. What a weird error for the manufacturer to make.
The only point I'd clarify, is when removing the glove box ('17 Platinum), after the pins have been extracted, there are two flexible catches above the inside of the glove box, Reach into the glove box and gently press up on those catches. It will allow the glove box door to tip farther open, and it will come off the hinge more easily.
Now, the biggest challenge is to get the stiff tabs on the filter cover to release....
Thank you for informing us!
Congrats to Ford engineers for making this job unbelievably difficult. The locking pin on the outside (right side facing forward) was ridiculously hard to get loose. I truly believe the idiots at Ford ought to be made to do all of these jobs to understand how to design...Thanks for the great video (no sarcasm); without it, I would have destroyed the glove box door. Thanks for helping us out here in do-it-yourself land!
I had no problem getting those pins out.... that's funny. anyway great video! thanks so much it saved me $40 getting the Mr Lube to do it when I got my oil changed
+Joe Ricciardi The pins can be a bit tricky! Thanks for watching! We love hearing good feedback!
+Sherry Muckleston We are glad it saved you some money! Thanks for watching!
Joe Ricciardi I have the same issue. What was your trick? It looks like the tab is pinched behind the airbag.
OMG - I agree with you 100%. Why make a consumable/replaceable item SO hard to get to. This SUCKS.
Thanks - this saved us a few min on a remote start install.
You're welcome!
Saved my life! THank you for this video!
Glad it helped!
this is also applicable to 2015 model. however i recommend avoid trying to undo the right side locking hinge pin as there is a bar in the way blocking the lateral movement making it incredibly difficult. undoing the left side will give u more than enough space to switch out the filters. just be careful not to lean on the door as it will break.
+Ryan Deeds Thanks for the advice and thank you for watching!
I almost gave up when removing the right side hinge pin until I saw your comment. Thank you for the tip.
Yeah like every other piece of plastic on these pieces of junk. Never ever will I buy a Ford again.
A little more difficult than my corolla. Thank you.
You're welcome!
Thank you!!! 🤗👍
You're welcome!
Order your filter today: www.filterheads.com/
By the way thank you so much for the video me a lot of money,
You're welcome!
We took our ford explorer to a garage last year to have the filter changed. I decided to do it myself this year. I discovered they broke the hinges by not removing the pins. I cut off the remaining loops of the hinge and now the glove box is loose. Now I have to make new loops. They should have watched this video first.
That is lame that the garage didn't inform you about breaking the hinges.
Excelent, very helpfull video! Thanks
You're welcome!
Thanks, you helped me!
You're welcome!
2003 Ford explorer sport 2 door , same spot? Glove box?
The 2003 Ford Explorer did not come with the cabin air filter option.
Would it kill them to save a few seconds and leave the filter visible with the cover removed BEFORE Removing so the viewer can see the airflow direction indicator arrow to help orient the new filter?
The airflow arrow points down. Thank you for watching!
Do you know where is the cabin filter on Ford Expedition xlt 2002
The cabin air filter on the 2002 Ford Expedition was a dealer installed option. It would be good to check and see if your vehicle has a cabin air filter before buying the filter because it is rare for this vehicle to have a cabin air filter. The video below will show you where your cabin air filter would be located but the video does not show the installation of the filter.
ruclips.net/video/ByTR8Vip37E/видео.html&lc=Ugzilq4I-o9l3HUXGld4AaABAg
Says our '97 Ford Expedition Eddie Bauer Edition had an in cabin filter. Ordered a new one and the filter cover is not under the passenger dash as suggested.
This video is for the Ford Explorer 2011 - 2017 cabin air filter change.
It does not have one.
I have a question what is the daperta court is for ,that you hooked back up to the side of the glove compartment,
2013 Ford explore, limit
The dampener cord just lets the glove box open slowly.
Is there a cabin filter in explorer 2005? (I briefly looked behind the glove compartment but did not open anything further. Looks the same to me)
The 2005 Ford Explorer did not come with a cabin filter installed.
what if the pins dont pop out no matter how hard you try?
What is the make model and year of your vehicle?
Nice he doesn't answer. Lame
Hello, does the 2003 ford Explorer XLT have a cabin filter and will these directions work for it? Thanks
Unfortunately the 2003 Ford Explorer XLT did not come with the cabin air filter option.
how to do this on a 1996 ford explorer xlt 4.0 4wd? please help me i think it is close to being clog or something is in it. how much for cabin filter for this vehicle plus a transmission filter and a fuel filter and oil filter.?
Hi Larry,
The 1996 Ford Explorer did not come with a cabin filter. It would be good to contact your dealer to get further instructions to see how you can clean your clogged vents. We also do not have filters for this vehicle.
Thank you for asking.
Please help, where would it be on a 2007 ford escape limited?
The link below is a installation video of a cabin air filter for a 2007 Ford Escape.
ruclips.net/video/EK4cyKS_LJ0/видео.html
Do you know where is the cabin air filter on a 08 ford expedition ?
At this time I do not have data that shows the location of the 08 model. It may have not come with the cabin air filter option.
hello how to you change a cabin filter on a 1999 Chrysler. town & country limited all wheel drive,3.8l engine?
Hi Larry,
The 1999 Chrysler Town & Country did not come with a cabin filter. Thank you for watching!
Do you know where is the cabin filter on Ford Explorer xlt 2010?
The 2010 model did not come with the cabin air filter option.
Does this video apply to a 2009 Explorer Sport Trac? Great video.
This cabin air filter installation is for the 2011 - 2017 Ford Explorer. The 2009 model did not come with the cabin air filter option.
@@filterheads thank you.
You're welcome!
I have a 2004 Ford Explorer XLS 4.0L 4WD, will it work for this model as well?
Your model did not come with the cabin air filter option. Thank you for watching!
Do you know who to change the one for 2002 Ford F150
We do not have a installation video for the 2002 Ford F150 but we do sell the cabin filter
It is very unlikely that your vehicle can actually accept a cabin filter. Very few were equipped from the dealer with a filter access door. Verify that your vehicle can accept a filter before ordering.
The cabin filter can only be installed if Ford kit # F65Z-18D477AA has been installed by dealer.
www.filterheads.com/product/single/AQ1018
Do you really need thick work gloves to get in the way to simply pull some plastic pins?
You do not need the gloves. Wearing the gloves help with the cameras color balance. With out the gloves the hands would look like they are glowing.
Safety first sir. Safety first.
@@filterheads Thanks! Very smart.
how about for ford everest Gen 3
We do not have a video for the Ford Everest. Thank you for watching!
I got those pins out with a flat head screwdriver. The best thing to do is to have a dwarf do it for you.
Smart thinking! Thanks for watching!
IDIOTS at Ford for making an easy job hard.
Anyone know where the air filter is located in an 07 Explorer Sport Trac??
I do not have any data showing it has a cabin air filter option.
am I correct in believing that the 2004 Ranger doesn't have one ether?
It might be time to change your cabin air filter. filterheads.com
Thanks
You're welcome!
Where is the cabin filter on a 2007 Ford Explorer
The 07 model did not come with the cabin air filter option.
trying to find the location of my cabin air filter to change it 98 expedition. Help.
We do not yet have a D.I.Y. video for the installation of this filter. It is very unlikely that your vehicle can actually accept this filter. Very few were equipped from the dealer with a filter access door. The only data we have states if the vehicle is equipped with a cabin filter it is below the glove box on the passenger side of the car and you need to remove multiple plastic rivets to access the filter door.
2000 explorer cabin filter location how do i find it
The 2000 Ford Explorer did not come with the cabin air filter option.
How about the 1998 explorer 5.0 ?
The 1998 Ford Explorer did come with a cabin filter but we do not have a installation video for the 98 Explorer.
filterheads I have a 1993. Wassup. Do I have a cabin filter?
Hi Jean, The 1993 Ford Explorer did not come with a cabin filter. Thank you for watching!
@ Filterheads,...Thank you !!
Is it the same for a 2001 Ford Explorer Sport?
Our data shows that the 2001 Ford Explorer did not come with a cabin filter. Thank you for watching!
What tools you need
You just need your hand and if your filter is really dirty you may want to use some gloves.
@@filterheads I couldn’t do it 😂🥴
Great Video - I *HATE* Ford for making this so hard to do. It could have been SO easy. I guess we don't want to compete with the Japanese car makers. Sliced my hand open good trying to do this BS job. No wonder it's $100+ to have my Ford dealer do it - they don't want to do it either. First part of my new Ford Explorer Platinum that I truly hated.
I am sorry to hear you cut your hand during the installation. I hope it heals quickly.
does a 01 ford f250 have a cabin filter? if so where?
My data shows that the 01 Ford F250 did not come with a cabin fitler. Thank you for watching!
Is this the same for a 2011 Ranger?
None of the Rangers are equipped with the ability to change the cabin filter. Thanks for watching though!
i have a expedition 04 you have some video.
This model did not come equipped with a cabin filter. Thank you for watching!
Can be the same for a 04 navigator?
This model did not come with a cabin filter. Thank you for watching!
ما يكفي تنظيف الفلتر بالهواء
Thank you for watching!
those white pins are a pain!!!
Hopefully the Ford Engineers do a better job with the installation in the future.
13 Explorer the same??
The AQ1153 filter does fit the 2013 Ford Explorer as well. The model shown in this video is a 2011 Ford Explorer but installation should be similar on your model. Thanks for watching!
would this work for a 08 f150
This model did not come with a cabin filter. Thank you for watching!
I do not get a smell even if I change a filter. Please teach a way of the cleaning of the evaporator!
+KOUJI .K shut of air condition about 2 blocks from your stopping point but keep fan running, that will help alot. This dries out the system which helps minimize bacterial buildup. They are the source of the smell.
Purchase your new filter today at www.filterheads.com
Year of the car?
Verify that your vehicle has a cabin filter before purchase..
The model shown in this video is a 2011 Ford Explorer but installation is similar on the others models.Purchase this filter at www.filterheads.com/AQ1153
AQ1153 filter fits:
Ford Explorer 2011 - 2017
Ford Flex 2010 - 2017
Ford Police Interceptor Sedan 2013 - 2016
Ford Police Interceptor Utility 2013 - 2016
Ford Taurus 2009 - 2016
Lincoln MKS 2010 - 2016
Lincoln MKT 2010 - 2016
Cabin filters ford f150 limited location
What year was your Ford F150 manufactured?
filterheads 2013
Our data shows that the 2013 model did not come with a cabin filter.
Are these the same directions for 2012 Explorer? Filter costs $25 @ dealer, but $85 installed. Maybe I'll do it myself. Filter # I was given: AE9Z19N619
It might be time to change your cabin air filter. filterheads.com
A worker at autozone hold me to remove the smell spray like Lysol in the ac inlet that will kill all bacteria and smell. Haven't try it. Was wondering if anyone his heard of that
Have you checked your cabin filter to see what condition it is in? It is a good to change your cabin filter every year or every 15,000 miles
I did it on my 2008 mercury mountaineer premiere but it only lasts 2 days then it smells mildewy again
I have a 2002 Ford Explorer Sport Truck 4x4
It might be time to change your cabin air filter. filterheads.com
the description of "removing the pins" is unclear. The reinstall instructions are even worse.
When facing the closed glove box you will want to slide the pins towards one another to remove them. You may need to use some force to remove these pins. Pay attention to the orientation of the pins before removing them so you know how they should be reinstalled.
My '13 Sport has those damn pins. I got one out, but can't get the other out. I've contorted myself every way possible to even be able to see it. Can't even get pliers or needles on it when I do see it. F'n Ford...
+knightalumni Those pins can definitely be a hassle! We hope you got them! Thanks for watching our video! Hope it helped!
yo video was not helpfull... 😐
Let me help you. We can start with you telling me the year, make and model of your vehicle.