How to Reset or Clone the code of 4 Channel RF Key Remote Control
HTML-код
- Опубликовано: 25 окт 2019
- Watch this video to learn how to reset and clone your remote control for gate or garage door.
You dont need to spend heaps for a new remote. I bought the ones from ebay for only a few dollars each rather than $50 for an old identical one. its very easy to program , here is how
Don't miss a video Subscribe Now! goo.gl/dDcLgJ
Follow Maxkil on Facebook / maxkilptyltd
Follow @Maxkil2 on Instagram / maxkil2
If your a professional and your business provides this service in your local area, wherever you are in the world, I invite you to add your skill set to a listing on my website global.maxkil.com/ - Кино
works! thanks a lot.
Awesome, definitely save money and time doing it yourself, nice work.
Best video of explaining how it actually works. Very simply explained. Thank you 👍🏽
Thank you!, I'd forgotten how to clear my remote, I lost my notes. Super helpful, easy, clear and concise, at least just the clearing part, thanks again!
Bought two of these remotes - both refuse to clear. All LEDs still come on when buttons pushed after following the clearing procedure.
same for me
I liked this scaffold. but congratulations on the gate controls programming tips
I reset mine doing the A and B and releasing B and B 3 times . Done it many time and the leds lights keep on coming on
Your rock
Hi, I just bought a couple of new 433Mhz remote controllers. But by pressing both buttons to reset, the light doesn't flashes to reset mode even holding on to it for 10 over seconds... Pls advise. The online shop that sold me the items wasn't very helpful. Pls advise. Thanks
Hi sir I lost my 2 remotes which components should I change to connect another remote
How to program it without original remote? Using garage door operator itself?
Yo, not sure if you figured out your issue but I decided to throw this out there for anyone else that may have my issue. I recently lost my fob for some motorcycle lights that I bought. I found that in the instruction manual, to pair a new remote without the old one (at least for the lights) you disconnect power to your receiver, then when you put power back on it it’ll enter pairing mode for 3 seconds. As soon as you connect power press and release A, then press and release B. Not sure if it will work for your door opener but it worked for my lights and I imagine it’s the same but it’s worth a shot
I just recently got one, but as soon as I program the second buttons the first one cancels out. The remote doesn’t have 4 channels, otherwise each Button would work separately, you can’t just have one signal you need multiple on the gates as the second one is half close, half open like the original, usually they have 3 buttons on the original and each one should correspond to that of the copy remote. Ripped off here.
I am STRUGGLING to erase my 4 channel remote. Please help!!!
ACCIDENTLY the remote was reset ( pressing A+B) how can I program the remote ? ( I dont need to clone )
Did you find an answer? I am trying for that with an aurduino
The original? Try holding in both C and D and see if that resets to the original programming.
Many of us, me included, found that pressing A + B did not work to clear the programming and asked you for help. You have not bothered to respond. Your advice is not at all helpful, so no thanks for nothing.
Have you subscribed to me? Have you become a member? DO I owe you something?