I have the same problem i had to use a thick piece of plastic using double sided sticky pads just to give some more area to stick camera on, been working spoton
Thanks for the great review. I was looking at both the immersion kit and also the Govee flow pro light bars. Not sure if you've used those or not but do you know if there's a performance difference between the two? Or even which you think is best? Cheers
Agree. I ordered 75"-85" one for my 85". It was really short. I needed to move in 5" from both side and 3 inch from top and bottom. But they were not really fit yet but still ok.
I had trouble calibrating using those orange tabs. There was too much reflection. I found the BEST way to calibrate. Find on RUclips "white screen". There's a very long video of white screen. Play the video and whole screen is white. You can see exactly where your calibration lines should go.
Thanks for this tip! I'm considering buying this kit. I already have their bars which I currently adjust manually more like an ambient indirect light rather than something that responds to the screen but I'm drawn to the LED strips. Anyway, everything is fine and I'm okay with sticking stuff to the back of the TV but I abhor the idea of sticking anything to the front!
@@CrazyBunnyGuy I have the bars on my TV upstairs and the strips on my TV downstairs. The bars work good but the strips are definitely better. More immersive!
What these reviewers and Govee do not tell you, is that it takes 21ft of LED strip to cover an 85"inch TV from corner to corner, they sell and advertise a set of immersion lights for TV from 75-85" but that kit only comes with 16.5 ft of LED strips, that does lot cover your 85" inch TV, and the corners will be awfully dark.
I dont lile how the camera sits on top of the TV. I've seen people connect them to bottom of the tv. I have tv on wall 6 inch above the tv and was wondering if I can sit the camera on the tv unit?
*Someone asked this question below*… “How long is power cable?” Everything mounts to the back of the tv. -LED power cord is 2.5-2.95 ft and goes straight To the back of the TV, -Camera cord is short just like the led power cord (goes to the control box stuck to back of tv.) -Main power cord goes to 12V plug 3.1-3.25FT. If you are on a entertainment center (power strip is built into the back of stand, every thing is perfect being short.) But to answer your question Main power cord to the control box- to the 12V plug is about 3.25-3.5 ft.
Does it set and save your settings and turns off and on automatically when your tv is turned off and on? Or do i have to turn on the tv and govee separately and configure the settings i want each time i turn on the tv/govee?
Hello I just started getting into led lights And found out yesterday that Immersion tv led lights are a thing. My tv is a 49in tcl roku tv. Do you think I’ll have an issue with set up? (I think it’s kind of foolish that this brand doesn’t make smaller led lights)
hello I have a question I want to buy a Govee DreamView T1 TV backlight for my Samsung 65 inch curved TV, I read that it doesn't work for curved, why? are there any alternatives?
Hello, I have a question. I have a goove led kit installed on my tv already. Could I use that existing one and connect the immersion control box to it?
@geeky stuff, did you have an issue with sticking the camera on, I have a very thin OLED tv and there’s no part for the large sticky pad of the camera to stick to
I had a similar but far superior product called Dream Screen for a long time. Looks like they went out of business which is sad. It didn’t use a camera and was perfectly accurate. Oh well maybe another will come along again.
I was wondering what is the relation of the strip and the wifi, because i am not able to connect the device with the Bluetooth and i am really trying to make it work do you have some clues for me. Thank you :)
Hi, great demo thanks. Can you choose a static colour setup for when the tv itself is switched off? In other words ... can you switch this led strip on to have a lighting scene/effect on the wall when the tv is switched off?
Only question I have, how do you get it to turn off with the TV? When I turn my tv off the LEDs remain on. Do I have to manually turn it off in the app every time?
I have an lg g2 series for ps5 and I installed govee. It’s ok and nice but is not as accurate as a my main tv for movies etc Phillips which works fantastic if you add hue and add other lights of your house.
Mine is only showing reds. I have it set to video so it'll display the colors that are on screen, but it's only showing reds. Is there something I'm doing wrong?
Hm my TV stand is in the center and bulky. Not sure how I'm going to install the bottom strip. I'm afraid if I go above the stand the lighting will be weird and if I just stick them over it I'll have similar problems.
Hi there, I've been trying to set up the govee immersion for days but cannot figure out how to set up for DreamView. The camera won't calibrate. It's on a 2ghz router, all wired up correctly, lights work fine but i really wanted this gadget for the DreamView, so i can enhance movie viewing. If it's not to much trouble, could you please talk me through your set up on the app. Also, the app has uploaded the latest firmware. Cheers
I bought the TaoX ones first but they have audio issues where they don’t really let my tv play audio for the longest time while they’re on and off they’re off I can’t switch the audio source back to tv workout unplugging them which is a real hassle, how does the govee kit handle audio?
Hi, do you know if there is any difference between this product and Goveee DreamView T1 TV backlight? Only I ordered the DreamView directly from Govee, but when it arrived it said Immersion on the box.
They are completely the same . If you want the best one it's the gaming box . It's about 200 But does way better than the camera lights. I have both the regular and the drain here and they are nothing compared to the gaming. The gaming box actually gets all the colors on the screen right exactly where they are, unlike the camera.
I wasted money on these because they did not meet my expectations that I wanted for my lights . But like I said the gaming box is what you want . . The price for these are not what they should be. I'd pay 60 for these , but the gaming I'll pay 300 cause they are wayyyyyyyy better .
What quality is this camera? Got this as a gift. But concerned about govee having access to seeing the inside of my house. Is it just a light sensor or is it like a 1080 type of camera?
I have a 70' tv, i honestly thought i had a 75' tv, so i got the 75-85 one, its too long on each corner, about 4 inches too long on each corner. Stupid me. So i was just about to order those clips so i could cut it down so it would fit perfectly, but i was reading the questions on the Amazon app and on the answers it says no you cannot cut these, but one answer says you can, so can you cut these and use the clips?
I’ve set up the 2 camera version and tested movies like Blade Runner 2049, Tenet, Dune and Interstellar on 65” C2 and it’s just not doing it for me. Sometimes it seems to output quite accurately and adds immersion - other times it looks way off and seems more a distraction. Even in this video if you pause at 7:32 - why is it displaying orange in the upper corners when it’s clearly blue/white? I have Hue+ with 3 light bars for my computer, wanted a cheaper option for my TV and I wasn’t necessarily expecting the same quality but I guess it’s relative to its much lower price. Not sure if I’m gonna keep it. It literally sometimes seems like I just have a light strip doing its own thing while I’m trying to enjoy a 4K UHD Blu-ray and at that point I’d rather focus on the TV.
Installation issue-app never asks me about connecting to wifi and can’t get to camera installation. Followed instructions and have a bright blue light on camera, but will not initialize. Everything I read says to make sure you do not skip the wifi connection portion but it never asks for it. When I try to go to wifi settings it just goes straight to initializing camera which fails. I’ve tried deleting and reinstalling the device on the app and deleting and reinstalling the entire app on two different phones that are connected to wifi. Any ideas??
I like this unit for the price. But the Phillips kit has corner and midline mounting brackets for the light strips which look to be valuable. You might be able to 3D-print similar brackets for the goveee.
@@fadedlogic1 Exactly what is the issue with the installation? is it the mounting of the brackets or that the led strips don't stay attached? Are the instructions not well written or clear?
@@PWingert1966 the light strip is quite difficult to place into the grooves, at least for me. After placing it in the top groove, installing it in corner groove would cause it to fall out of the previous groove and half the strip stopped working. I also found out the hdmi sync box is not 2.1 compliant and does not pass along a 120hz signal. 5 times the cost, increased points of failure, and not nearly as easy to install as the Govee.
Do these lights save your settings?? I bought some from Amazon and EVERYTIME i turn the TV on i have to manually select what color i want. Its annoying
Help please Anyone know why my back-light is one solid colour, it picks the most dominate colour on screen instead of multiple colours around the screen
I still have no clue how to Connect this govee system to my phone. I have the govi home app but I see nowhere to connect the device. I tried to connect to Bluetooth and it says I need an app that I already have. Any suggestion
I’ve had mine for a about two months. They’ve worked every single time, and I was just cleaning my TV stand, and they went off suddenly. And now they won’t turn back on any suggestions
@@jramoschristie haha yeah. It could technically work, but wouldn't reach right near the edges of the TV lol. Would be a smaller rectangle on the back.
I have bought it from ebay & everytime i try to connect it says “unbind from other device” i tried to reset it but it doesn’t work at all … any solution to this ?
question bro 2:24. is there a indication in the strips on which side of the tv it is supposed to be stuck on? or you can just put them randomly and they will still work the same?
The dam box don't say how to bend a 90 or what the clips are for. I sent it back to the store bc I shouldn't have to be searching all over the web for instructions. But this video was dope
Obviously this would work best against a flat wall, but our TV and stand have to be at a 30-45 degrees. Any thoughts on how well this will work when not very close to the back wall?? (I know it's not ideal) Great job on the video and setup steps!
Hi, so I just got these in today and took your recommendation of plugging them in before installing. But mine didn’t light up which I found to be weird considering the little blue light on the camera was blinking, just wanted your thoughts and what you think the problem could be. Thanks !
I dont get. Is the led strip longer and you cut some of it? Because if this is 55" tv and led is perfectly around tv then for 65" you wont cover all the tv back?
after pluggin in my lights for some reason they arent lighting up anymore. ive unplugged everything many times and they dont light up. anyone know why?
Quick question, since I’m an Apple guy and this doesn’t have Siri support, will this turn on automatically if I connect the power to a Siri enabled smart plug? Basically does it turn on as soon as it gets power or do you have to manually turn it on every time?
Hi Bob! In the app you can set timers to turn on or off. Otherwise you have to do it manually. You could get a smart plug too though. I set timers in the app for mine. 👍 On and off timers.
@@GeekyStuff thanks! The smart plug basically only turns power on and off to the device. I’m wondering if the device automatically powers on when it gets power.
I am getting conflicting answers on this question and hoped you can help; My TV is 77" so I purchased the kit for 75-85 inch TVs. Can I simply loop the excess evenly at the corners or do I cut off the extra length as is done with some other brands? Govee answered someone on Amazon who asked by saying you should never cut the lightstrip. Thanks in advance!
Thank you for showing how you dealt with the wire "dog ears" at the back of the TV. Much appreciated.
Just ordered this kit for my new 75 inch Samsung and I'm excited. Your review helps ease my mind about installation. Thanks a bunch.
How did it turn out?
Also curious...I have a 75 as well
same...
Same! Just installed it on my 75inch samsung!
Picked mine off my front porch this morning before work. Super excited.
Enjoy it
@@GeekyStuff Thank you
✨ Get Govee Immersion On Amazon here ✨ - (UK): amzn.to/3jLonlc
I have the same problem i had to use a thick piece of plastic using double sided sticky pads just to give some more area to stick camera on, been working spoton
Thanks for the great review. I was looking at both the immersion kit and also the Govee flow pro light bars. Not sure if you've used those or not but do you know if there's a performance difference between the two? Or even which you think is best? Cheers
I recently bought the 75”-85”inch one for my 70”inch tv and it covered it perfectly I do recommend sizing up and just hold down the left over cable
Agree. I ordered 75"-85" one for my 85". It was really short. I needed to move in 5" from both side and 3 inch from top and bottom. But they were not really fit yet but still ok.
I had trouble calibrating using those orange tabs. There was too much reflection. I found the BEST way to calibrate. Find on RUclips "white screen". There's a very long video of white screen. Play the video and whole screen is white. You can see exactly where your calibration lines should go.
Thanks for this tip! I'm considering buying this kit. I already have their bars which I currently adjust manually more like an ambient indirect light rather than something that responds to the screen but I'm drawn to the LED strips. Anyway, everything is fine and I'm okay with sticking stuff to the back of the TV but I abhor the idea of sticking anything to the front!
@@CrazyBunnyGuy I have the bars on my TV upstairs and the strips on my TV downstairs. The bars work good but the strips are definitely better. More immersive!
What these reviewers and Govee do not tell you, is that it takes 21ft of LED strip to cover an 85"inch TV from corner to corner, they sell and advertise a set of immersion lights for TV from 75-85" but that kit only comes with 16.5 ft of LED strips, that does lot cover your 85" inch TV, and the corners will be awfully dark.
Thanks for telling us
Imagine being named Rodolfo 💀💀💀 bro change your name wtf
They offer 3 options the 16.5 ft around 22.5 ft and other one is around 30ft
They offer 3 options the 16.5 ft around 22.5 ft and other one is around 30ft
Would you recommend just buying the 65ft lights for 85inch tv?
Thank you! Going to try this… as I set my sisters up but it isn’t following the colours on the screen at all!
I dont lile how the camera sits on top of the TV. I've seen people connect them to bottom of the tv. I have tv on wall 6 inch above the tv and was wondering if I can sit the camera on the tv unit?
Is there anyway I can fit this on a 45’ inch tv like if I move the light strips?😊
*Someone asked this question below*…
“How long is power cable?”
Everything mounts to the back of the tv.
-LED power cord is 2.5-2.95 ft and goes straight To the back of the TV,
-Camera cord is short just like the led power cord (goes to the control box stuck to back of tv.)
-Main power cord goes to 12V plug 3.1-3.25FT.
If you are on a entertainment center (power strip is built into the back of stand, every thing is perfect being short.)
But to answer your question Main power cord to the control box- to the 12V plug is about 3.25-3.5 ft.
Thanks! Mine just came today! This is a lifesaver!
Ah brilliant, glad it helped ☺️
Just got mine today from best buy, they had them on sale
The cables that you tried shortening around the corners of the TV, do they come in with the box?
Yes they do
Trying to set up mine now
Can I cut out the remaining led lights away from the tv
I like eating apples?! You got a comedian on your hands lol
Thankyou for the guide, twas very helpful!
How do I work this with my Alexa? Have you tried that yet?
Does it set and save your settings and turns off and on automatically when your tv is turned off and on? Or do i have to turn on the tv and govee separately and configure the settings i want each time i turn on the tv/govee?
Did you ever figure it out ?
@thegarcfamily5270 it's seperate.
Hello I just started getting into led lights
And found out yesterday that Immersion tv led lights are a thing.
My tv is a 49in tcl roku tv.
Do you think I’ll have an issue with set up? (I think it’s kind of foolish that this brand doesn’t make smaller led lights)
I’m also curious of this as well
Do you need to attach the HDMI’s to the Govee? I use HDMI 1. HDMI 2, and HDMI 3. Would they all work? Thanks, great video.
hello I have a question I want to buy a Govee DreamView T1 TV backlight for my Samsung 65 inch curved TV, I read that it doesn't work for curved, why? are there any alternatives?
Noticed your TV is not smooth plastic. Looks like samsung with rough surface ridges. Do the LED lights stick properly ?
Yea it's Samsung and yep the LED lights are still stuck on to this day too 👍
Can’t get my iPhone to find it on Bluetooth. Sticks around the enable Bluetooth section of the app. Any ideas? On 2.4ghz
Hello, I have a question. I have a goove led kit installed on my tv already. Could I use that existing one and connect the immersion control box to it?
@geeky stuff, did you have an issue with sticking the camera on, I have a very thin OLED tv and there’s no part for the large sticky pad of the camera to stick to
I had a similar but far superior product called Dream Screen for a long time. Looks like they went out of business which is sad. It didn’t use a camera and was perfectly accurate. Oh well maybe another will come along again.
I was wondering what is the relation of the strip and the wifi, because i am not able to connect the device with the Bluetooth and i am really trying to make it work do you have some clues for me. Thank you :)
Hi, great demo thanks. Can you choose a static colour setup for when the tv itself is switched off? In other words ... can you switch this led strip on to have a lighting scene/effect on the wall when the tv is switched off?
Yes you can mate. 👍
hey people scrolling through the comments, i have a question. does this also work with a gaming monitor?
Can you connect more than one strip light source?
Who needs the Phillips Ambilight tvs now?
possible to put the camera at bottom ?
Only question I have, how do you get it to turn off with the TV? When I turn my tv off the LEDs remain on. Do I have to manually turn it off in the app every time?
I have an lg g2 series for ps5 and I installed govee. It’s ok and nice but is not as accurate as a my main tv for movies etc Phillips which works fantastic if you add hue and add other lights of your house.
we detected that your strip light camera has not been installed, or you did not wait for 20s after ins؟؟؟؟؟
Great review however you dont mention power source how does it get power? My tv in past says not enought power to run usb device?
Mine is only showing reds. I have it set to video so it'll display the colors that are on screen, but it's only showing reds. Is there something I'm doing wrong?
Hi i have a sound bar fitted to the top of my tv how would you fit the lights so the light does not bet obstructed
Do you think this will this work with a 38" ultra-wide monitor ok? I will the wider aspect ration confuse the software?
Thanks for the reivew. Nothing beats Hyperion I guess.
Hm my TV stand is in the center and bulky. Not sure how I'm going to install the bottom strip. I'm afraid if I go above the stand the lighting will be weird and if I just stick them over it I'll have similar problems.
Can you please check if the power is 110-220v? Or only 110?
Hi there, I've been trying to set up the govee immersion for days but cannot figure out how to set up for DreamView. The camera won't calibrate.
It's on a 2ghz router, all wired up correctly, lights work fine but i really wanted this gadget for the DreamView, so i can enhance movie viewing.
If it's not to much trouble, could you please talk me through your set up on the app.
Also, the app has uploaded the latest firmware.
Cheers
Did you fix it?
My TV is on a stand. Can I configure it to only be on the top and two sides but not bottom?
I bought the TaoX ones first but they have audio issues where they don’t really let my tv play audio for the longest time while they’re on and off they’re off I can’t switch the audio source back to tv workout unplugging them which is a real hassle, how does the govee kit handle audio?
So will this work on a 65in Samsung curved tv. Just wondering if the curves will affect camera at all.
Hi, do you know if there is any difference between this product and Goveee DreamView T1 TV backlight?
Only I ordered the DreamView directly from Govee, but when it arrived it said Immersion on the box.
They are completely the same . If you want the best one it's the gaming box . It's about 200 But does way better than the camera lights. I have both the regular and the drain here and they are nothing compared to the gaming. The gaming box actually gets all the colors on the screen right exactly where they are, unlike the camera.
I wasted money on these because they did not meet my expectations that I wanted for my lights . But like I said the gaming box is what you want . . The price for these are not what they should be. I'd pay 60 for these , but the gaming I'll pay 300 cause they are wayyyyyyyy better .
Great video. BTW, Brown is DARK Orange.
Hi what size would in metres would I need for 65 inch TV thanks
Everywhere I read it's not fits curved tvs, but you add on it, does it work on curved tv?
Yep, works on my curved TV fine.
What quality is this camera? Got this as a gift. But concerned about govee having access to seeing the inside of my house. Is it just a light sensor or is it like a 1080 type of camera?
I have a 70' tv, i honestly thought i had a 75' tv, so i got the 75-85 one, its too long on each corner, about 4 inches too long on each corner. Stupid me. So i was just about to order those clips so i could cut it down so it would fit perfectly, but i was reading the questions on the Amazon app and on the answers it says no you cannot cut these, but one answer says you can, so can you cut these and use the clips?
Nope, you cant cut these mate. You can try and fold them and stick on TV.
I’ve set up the 2 camera version and tested movies like Blade Runner 2049, Tenet, Dune and Interstellar on 65” C2 and it’s just not doing it for me. Sometimes it seems to output quite accurately and adds immersion - other times it looks way off and seems more a distraction. Even in this video if you pause at 7:32 - why is it displaying orange in the upper corners when it’s clearly blue/white? I have Hue+ with 3 light bars for my computer, wanted a cheaper option for my TV and I wasn’t necessarily expecting the same quality but I guess it’s relative to its much lower price. Not sure if I’m gonna keep it. It literally sometimes seems like I just have a light strip doing its own thing while I’m trying to enjoy a 4K UHD Blu-ray and at that point I’d rather focus on the TV.
Installation issue-app never asks me about connecting to wifi and can’t get to camera installation. Followed instructions and have a bright blue light on camera, but will not initialize. Everything I read says to make sure you do not skip the wifi connection portion but it never asks for it. When I try to go to wifi settings it just goes straight to initializing camera which fails. I’ve tried deleting and reinstalling the device on the app and deleting and reinstalling the entire app on two different phones that are connected to wifi. Any ideas??
I like this unit for the price. But the Phillips kit has corner and midline mounting brackets for the light strips which look to be valuable. You might be able to 3D-print similar brackets for the goveee.
The Phillips strip is a nightmare to install on those brackets and way over priced; I just sent it back.
@@fadedlogic1 Exactly what is the issue with the installation? is it the mounting of the brackets or that the led strips don't stay attached? Are the instructions not well written or clear?
@@PWingert1966 the light strip is quite difficult to place into the grooves, at least for me. After placing it in the top groove, installing it in corner groove would cause it to fall out of the previous groove and half the strip stopped working. I also found out the hdmi sync box is not 2.1 compliant and does not pass along a 120hz signal. 5 times the cost, increased points of failure, and not nearly as easy to install as the Govee.
@@fadedlogic1 Thankyou. This is the information I was searching for to help me make a decision.
Do these lights save your settings?? I bought some from Amazon and EVERYTIME i turn the TV on i have to manually select what color i want. Its annoying
Help please
Anyone know why my back-light is one solid colour, it picks the most dominate colour on screen instead of multiple colours around the screen
I still have no clue how to Connect this govee system to my phone. I have the govi home app but I see nowhere to connect the device. I tried to connect to Bluetooth and it says I need an app that I already have. Any suggestion
Got mine today thanks for the video !
Oled tvs have a small bezel so I feel like the camera will hang a bit on the screen
I’ve had mine for a about two months. They’ve worked every single time, and I was just cleaning my TV stand, and they went off suddenly. And now they won’t turn back on any suggestions
what happens if you accidentally hit against the camera, do you have to calibrate from scratch again?
Of course
Will it fit a 75 omni smart TV that's mounted on the wall good
Wdy do if you have a 75" tv and the kit for 55-65?😊
So do these need to be plugged into outlet or into the USB?
My TV is in a corner. I don't get the full effect. Any tips mate?
My Roku stream stick already uses the USB port on my TV..now what do I do?
can i use it without the camera?
i don't wanna sync video or sound
9:59 thanks my guy , I set up it up watching this vid, forget the instructions lol
I'm glad this video is still helping years later 🙏 😂
How do you connect the lights via WiFi? I can't get them to connect via bluetooth
With the heat generated from the TV, does the adhesive come off overtime?
If it does you could just use Velcro stickies to stick it back on.
Thank you! Looks like I'll be buying!
Nm. No 75inch option
@@jramoschristie haha yeah. It could technically work, but wouldn't reach right near the edges of the TV lol. Would be a smaller rectangle on the back.
I have bought it from ebay & everytime i try to connect it says “unbind from other device” i tried to reset it but it doesn’t work at all … any solution to this ?
question bro 2:24. is there a indication in the strips on which side of the tv it is supposed to be stuck on? or you can just put them randomly and they will still work the same?
It doesn't really matter where. They'll work whatever. Always best to start in a corner then work it round though.
Can we use govee immersion 55-65 RGBIC on a 24 inch monitor?
Nope, it would be too long. You can't cut this type of either. So it's one size.
Very thorough! Thanks so much😊
Glad it helped 👍
Do you have to install the led strips in any order? How does it know the orientation and where to display color from the camera?
Yea the camera does all the work mate. It captures colour from the TV and sends it to the LEDs. It doesn't matter which way you install it
@@GeekyStuff thanks!
Anyone have issues with running the strips on the bottom? Especially when tv stand is in the way
can you connect other led bulbs/strip or you are limited to the one connected to the tv?
Was wondering during the same thing, planing to use extensions for a larger projection screen.
@@kenckenc Sent a mail to the Support. You are able to do it only if you buy RGBic products
my tv isn't right up against the wall. Its about 15 inches away. Would it still be worth getting these if it isn't close.
Yea but when it's dark
Just got mine. Amazing !
Does this take up one of your tv HDMI ports, or is it all controlled by the box? Tempted to give it a go
Nope, this doesn't use any HDMI ports. 👍
The dam box don't say how to bend a 90 or what the clips are for. I sent it back to the store bc I shouldn't have to be searching all over the web for instructions. But this video was dope
Would this be difficult to install on a 43in TV?
Did u ever find out
Obviously this would work best against a flat wall, but our TV and stand have to be at a 30-45 degrees.
Any thoughts on how well this will work when not very close to the back wall?? (I know it's not ideal)
Great job on the video and setup steps!
Can i use them without camera thanks in advance
Great video, if you do t mind me asking how did you find the best way to calibrate to a curved tv?
Hi, so I just got these in today and took your recommendation of plugging them in before installing. But mine didn’t light up which I found to be weird considering the little blue light on the camera was blinking, just wanted your thoughts and what you think the problem could be. Thanks !
Hi Alan, I am not sure. Probably best to contact Govee support about that. Thanks for watching though.
Mine working weird too
This happened to me. Try plugging it the other way.
@@Coralnanoreef what do you mean plug them in the other way?
I dont get. Is the led strip longer and you cut some of it? Because if this is 55" tv and led is perfectly around tv then for 65" you wont cover all the tv back?
Nope you can't cut this unfortunately. The 65" it will fit perfectly all the way round. Should do anyway.
after pluggin in my lights for some reason they arent lighting up anymore. ive unplugged everything many times and they dont light up. anyone know why?
Thank u man. U are great 💖🙏
Does this require your phone to always be connected to work or do you only need the app to configure it initially?
Phone doesn't need to be connected.
Does this work with tv integrated apps or is it for consoles and fire stick only?
Just for govee app only.
Quick question, since I’m an Apple guy and this doesn’t have Siri support, will this turn on automatically if I connect the power to a Siri enabled smart plug? Basically does it turn on as soon as it gets power or do you have to manually turn it on every time?
Hi Bob! In the app you can set timers to turn on or off. Otherwise you have to do it manually. You could get a smart plug too though. I set timers in the app for mine. 👍 On and off timers.
@@GeekyStuff thanks! The smart plug basically only turns power on and off to the device. I’m wondering if the device automatically powers on when it gets power.
the kids were so cute omg 😂❤
Lol thanks for watching 😊
I am getting conflicting answers on this question and hoped you can help;
My TV is 77" so I purchased the kit for 75-85 inch TVs.
Can I simply loop the excess evenly at the corners or do I cut off the extra length as is done with some other brands? Govee answered someone on Amazon who asked by saying you should never cut the lightstrip. Thanks in advance!
Hello - Yea, DONT cut these one. You can simply fold the excess in the corners just like I did on my installation. Hope this helps.
03:52 in the video I show you how I did mine.
@@GeekyStuff Thank you so much!
That seems easy enough.
THANK YOU
Hi may be a daft question but do they work on a 120 HRZ TV
Yes it will 👍 refresh rate makes no difference.
Will it still work if, the pphone where it is connected is not within the room, nor far away?
Yes it will 👍
@@GeekyStuff thanks for quick reply, great review btw😉