Must-Have 3D Printed Accessories! for The Bambu Lab A1
HTML-код
- Опубликовано: 4 июл 2024
- This video details an essential upgrade that all Bambu Lab A1 owners should install right away! It's vital to the health of their machine and to personal safety. Aside from that one essential print, this list features many must-have accessories that can improve the A1 user experience.
⚠️Due to the recent callback, please take the necessary precautions by inspecting your A1 heatbed cable for damage as soon as possible. If your cable is damaged then 🛑stop using your machine and reach out to Bambu Lab for support. If not, still make sure that you print and install the heatbed cable protector to prevent damage in the future. Keep you and your loved ones safe!
🔗Link to Bambu Lab Blog Article :
"A1 Heatbed Cable Callback" - blog.bambulab.com/a1-heatbed-...
🖨️3D Print Links:
A1 Heatbed Cable Protector: makerworld.com/en/models/1588...
A1 Purge Management System: makerworld.com/en/models/9176...
Bambu Scraper Grip: makerworld.com/en/models/1270...
Small A1 Series Accessory Box: makerworld.com/en/models/9788...
A1 Build Plate Aligner: makerworld.com/en/models/1090...
Bambu Build Plate Caddy: makerworld.com/en/models/7580...
A1 AMS Lite PTFE Removal Tool: makerworld.com/en/models/1035...
Sunlu AMS Lite Spool Adapter: makerworld.com/en/models/4243...
AMS lite Top Mount for the A1: makerworld.com/en/models/9248...
A1 Top-Mount Extension Arm for Spool Holder: makerworld.com/en/models/1465...
🛒Shop (Affiliate Links):
Bambu Lab A1: us.store.bambulab.com/product...
Bambu Lab A1 Mini: us.store.bambulab.com/product...
Bambu Lab P1S: us.store.bambulab.com/product...
Bambu Lab X1 Carbon: us.store.bambulab.com/product...
Overture White PLA Filament: a.co/d/0NJCuXB
Sunlu White PLA Filament: a.co/d/cu8wVyE
Check out my Etsy Store➡️ etsy.com/ca/shop/Creatorrific
Check out my socials ⬇️
Tik Tok: / creatorrific
Facebook: profile.php?id=6...
Instagram: / creatorrific
📖Chapters:
0:00 Intro
0:53 A1 Heatbed Cable Callback Details & Heatbed Cable Protector
4:12 A1 Purge Management System
5:19 Bambu Lab Scraper Grip
5:53 Small A1 Series Accessory Box
6:24 A1 Build Plate Aligner
6:48 Bambu Build Plate Holder
7:23 A1 AMS Lite PTFE Removal Tool
8:34 Sunlu AMS Lite Spool Adapter
9:05 AMS Lite Top Mount for the A1
12:34 A1 Top-Mount Extension Arm for Spool Holder
13:11 Concluding Remarks
#creatorrific #3dprinting #bambulab 
Наука
🚨ATTENTION🚨 There's been an official update from Bambu Lab for the A1 heatbed cable call back since this video was released. Please disregard the information on the first accessory that I mentioned. Bambu Lab has escalated the matter and they're saying that ALL OWNERS SHOULD STOP USING THIER A1s IMMEDIATELY. There are 2 options available to move forward. Option 1 - return/refund the A1 and receive a $80 credit in addition. Or Option 2 - wait until the end of March for Bambu Lab to send replacement parts and receive a $120 credit in addition.
Read their updated blog article here 👉blog.bambulab.com/a1-recall-update/
I'll create a follow-up video shortly that goes into detail.
For most that cable is NOT an issue. Bambu is just covering their backsides by doing the recall. That cable guard would work forever.
BTW Bambu is NOT providing a cable replacement. They are proiding a complete heated Bed replacement. I just recieved and installed mine. Easy peezy with thier instructions.
Yo have they fixed this yet for the UK
Oh, that's good.
I congrat Bambulab for doing the right thing.
Just ordered an A1 - looks like I have the first set of projects to print! Thank you, very helpful and well produced video.
Thanks a lot for watching! I appreciate the kind support and I'm glad you found this video useful. Hope you have lots of fun printing with the A1.
Thanks for sharing, this is a great assortment of upgrades!
Thanks for watching! I appreciate the comment.
Very to the point.. Love it!
Thanks for watching!
Just baught this setup for my first printer. Ill be coming back to make these. Nice video production too
Thanks for watching. Hope you're enjoying your new printer.
Your suggested printings are good. The overall video is good, will watch more of your videos.
Thanks for the support!
Great video. Very helpful. I was always procrastinating because of the footprint of the printer, but the guide on getting the AMS on the printer bridge was really what got me eventually to make the buy. Thanks
Thanks for the support! Glad I could help you reach a decision. Hope you enjoy the printer.
Even if you dont have an AMS lite the Z brackets make the printer much more rigid and id highly recommned it.
Agreed. Thanks for watching!
Creatorrific: good job taking the time sharing. some of ur ideas with us.
Thanks for the support!
Great list of accessories. Love the video. Thanks!
Thanks for supporting!
@@Creatorrific So I did notice that when I tried to use the build plate aligner that I'm not getting "nozzle is covered with filaments" errors because it looks like it checks for filament in the upper left AND upper right corner. Great idea but it looks like the new firmware may cause some issues. Beat my head against this issue for HOURS before realizing what might be causing it.
"my plant's happy..." Nice touch, that. I need to find an X1-C version of that Accessories box.
😄 Thanks for watching. The X1C's a really nice 3d printer.
I just ordered mine yesterday, hoping to get it soon to compliment my behemoth Anycubic Kobra 2 Max! It makes awesome huge pieces like helmets and supports/shelving/organizers, and does decently well on smaller items but now i will have this for higher detailed, multicolored projects
That's a nice combination. Hope you enjoy the new 3d printer!
Thanks, this is one of the few, printed accessories videos, that was truly helpful, and not just go buy this go buy that. Thanks.
Glad you found my video useful. Thanks a lot for watching!
DAMN your so underrated! if i had only seen the video i wouldve thought you have 200k+ subs! Your video is just sucha high quality one! simple yet cool designed moving elements, nice voiceover, and good clips. perfect video theres nothing bad about it.
🙏 Thank you so much. I appreciate your kind words. Thanks for watching and for the support!
great list! very well done video
Thanks for watching! Glad you liked it.
This is the future. I just bought one a few days ago. It’s coming in. I haven’t looked up any news if they happen to solve them, but I’ll be printing these just to be sure.
That's great! Your new order should arrive ready to go with the heat bed problem fixed. Hope you enjoy it!
Great video!
Thanks a lot! I'm glad you enjoyed it.
Nice work, sir!
Much appreciated. Thanks for watching!
Excellent video! You'll go far on this platform. Well done.
Thanks a lot for your support!
Great video. I like that top mount. Most in the past do not have the stiffeners and the A1 is top heavy the the top mount AMS, this solves that problem. I didn't have any problem aligning the build plate with my pre-recall A1 but seem to with it's replacement I just got. Not sure it's it's the new printer or what. If they would remove or move forward the rear magnets on the heat bed I thing it would solve this problem or make the stops on the back of the heat bed bigger/taller. While I like my BBL A1 regretfully "getting back to you quickly" (14.32) is not a something BBL apparently can do. Their support is some of the worst I have ever seen.
Very nice video.
Thanks for watching. I appreciate the support.
the build plate alligner is now obsolete since the latest update. it now puts the hot nozzle over in the top right hand corner on the 2nd layer and it melts and collects the clip haha
Oh shoot, that's not good. Thanks for the info!
Got my A1 last week. The top mount screws were actually already included and the cable thingy has been fixed!
That's dope that it came with the screws already. Hope you enjoy the new 3d printer. Thanks a lot for watching!
Very nice selections. I have most of those printed. The newest a1 firmware has bed detection and sometimes had issues with the bed plate corner aligner, so I'd exclude they one. Great video, thanks.
And I'm keeping my a1, it's just so good. I've purchased an a1 mini while i wait for the revised a1 heatbed.
Thanks for the info! I'm going to keep my A1 as well, but I'm deciding between the A1 Mini or the Anycubic Kobra 2 Pro as a replacement in the meantime.
Had the same issue with mine since the update. Took a while to figure it out but then saw that the corner aligner was melted where the tip was touching it. Keeping my A1 as well. Nice machines and no issues. I've got my ticket in and will wait for new heat bed to arrive. Thinking of getting a P or X series in the meantime.
There is an updated corner locator for the new firmware which fixes this issue
I find the scraper to be a bit too scrapy for textured PEI plates. In my experience, the best tool for the job is a scraper made for an oscillating multitool. Spend the money to get a good one and it should be good right from the package. If you cheap out, make sure you take the time to remove the burr from the scraper before use. Either way, these never fail me.
Thanks, I might give that a try. You're right, the metal blades are probably best for the smooth plates.
About how tall is this printer with the top mounted AMS? I'm considering this model but I'm working with limited space.
@Creatorrific there is a print to make the scrapers more perpendicular to the plate. Also the scraper with replaceable blades on printables is amazing. Additionally search the bendable ones. They really get anything stubborn up
The Callback has been changed to a full recall, FYI.
I wanted to tell you what an awesome video this was! very professional, extremely informational and well put together! It's a very classy touch that you give links to all the things that you spoke about through the video. I also have an A1 purchased in December set it up after Christmas and after a slight adjustment to the heat bed it has worked awesome. My cable to the heat bed shows no sign of fatigue although I'm holding off using it and I am NOT returning it!I had considered buying an X1 Carbon but I'm holding off on that too to see how well they pull off the repair of this very nice little machine.
Thanks again for the great video! P@t
Thanks a lot for your support P@t! I'm glad you enjoyed the video. Hopefully, we can get back to fully enjoying this machine in a few weeks when Bambu Lab ships those replacement heat beds.
After recall I would add the A1 Heatbed Cable Chain by dalelovelace and the Bambu Hubcap - AMS Lite Rotary Spool Lock by SThane all are on Maker World.
Thanks for the suggestions! I'll check those out.
Good thing is i got this printer yesterday and that was first thing i checked and it was already fixed with a mesh tube if you call it that way
Nice! Great that you don't have to deal with that issue. Thanks for watching.
What is interesting about this damaged cable thing with Bambu Lab A1
I just watched aurora tech review on the printer.. and you could see, that their printers cable was damaged, just like in the example image from bambu lab
Great video and excellent tutorial on the AMS bracket. Have you come across a good solution for keeping the filament dry while on the AMS lite?
Thanks! I haven't found a solution while it's on the AMS Lite, but the Sunlu S4 filament dryer fits 4 spools - perfeft match. I''m going to grab one of those and I'll just dry filament in there before loading using the AMS.
Just ordered my A1 combo today. I’m going to start printing these models before it gets here. 😊
That's great! Hope you have lots of fun with the A1, it's a great machine. Thanks for watching.
another great video, thanks :) tbh I am not sure if you need any other build plates, from what I have read provided textured PEI should be the best in every regard, at least out of ones bambu sells.
Thanks! I love the textured PEI plate also. It's a nice finish for the bottom of prints but if the print's orientated on its side, I prefer a smooth finish to match the other side. Otherwise textured PEI plate all the way!
@@Creatorrific yeah that makes sense, thanks :)
the buildplate aligner mod you covered gives my a1 an error message (and others on Reddit too)
The shitty tubing fittings should have been recalled from the start. Biggest gripe. Ive neber in my life had such a hard time removing tubing and I deal with push connect air fittings almost daily at work.
What padding is that at the top and bottom? Guess to stop twisting
What about building a support for the top-mount extension AMS to the back wall for stability? Good or bad idea?
I've seen it done. I don't think it's a terrible idea if your wall material allows it, but I think the printed top mount works great since there's no need for construction.
I also bought the screws for 2$ with my A1, but it looks like in the accessories there are also the screws now, so this is only for people who have already ordered their printer and want to upgrade.
Its just 2$ wasted for me so im fine.
great video, thanks
i think there is a problem design of A1 Top-Mount Extension Arm for Spool Holder
with lasts layers, empty spaces
Thanks for the support!
I ordered mine yesterday. So this issue has not been resolved for cable damage? I mean i m worried already now after looking this.
Sorry for the late response but by now you've probably that you're fine. The printers sold at the time when you purchased and going forward are fixed.
my A1 just came a week ago and has a different cable
Awesome. The braided cable that it now comes with is really durable. Bambu Lab went beyond in correcting this issue. Thanks for watching!
Does the Top Mount affect the vibration while printing a lot?
I haven't found that to be the case at all.
What filament did you use to print the top mount? Can you use standard pla?
I believe that I used Sunlu standard PLA. It's plenty rigid and secure. Hope that helped!
@@Creatorrific I just pullede the trigger on the A1 combo :D I am so freaking excited :D
The hot bed cable protector is NOT a nessary thing since Bambu has done a recall to replace the heated Beds!!!!!
Can you print tpu on the A1?
Hey, thanks for watching! You can definitely print TPU using the A1.
Well thats silly. Thank goodness for the camera because i dont want my stuff tk burn. My childrens drawsing and photos are ao important. Whybdoesnt bambu actually make a real fix....
May want to reupload this as they dony want you using the A1 at all now and total recall. So that information old in the video and could be confusing.
30 bucks on amazon... a quad holder and 3 bowden tubes later and i don't need an ams.... btw its only there to tell the printer what you are using for filament...
How did you do this I am very curious
È un grave errore mettere tutto quel peso in cima all'albergo, le vibrazioni e il peso eccessivo dell'intero sistema AMS introducono ulteriori flessioni alla struttura dell'asse Z cosa per cui non è progettata, questo set-up non ha alcun senso
You're missing a fire extinguisher on the list
Great video!
Thanks for the comment! Glad you enjoyed the video.