How to replace the automatic transmission shifter in Freightliner Cascadia 2010 and above.
HTML-код
- Опубликовано: 18 окт 2024
- Welcome Back to Let's talk DIESEL. We are about to learn the steps to remove and install the automatic transmission shifter in the older and newest Freightliner Cascadia. If you are new to the channel remember never hurts to know more about your vehicle, even the most simple things can save you couple bucks down the road, so let's go and learn.
Please like if you find this video helpful, share it with those interesting in learn about diesel and if you have an opinion or a suggestion please leave it in the comments section below.
Thank You and May God Bless You.
#transmission #diesel #learn
Thank you, Bro. You did go slow so that we can understand, and you explained the process . Thank you
Glad it helped
Thank you brother for explaining 👍🏻
My pleasure
this guy idiot. he is replacing selector not a shifter.
Nice one bro!
I think what is wrong with my truck. Question did you get check engine light and it say shift selector problem?
Check engine light will pop up with a transmission issue, but to know for sure it is the shifter, Diagnostic Link tool is need it. Thanks for watching.
Mines saying Shift selector also
My 16 and up cascadias sometimes has that problem but it’s not that parts. This happens because the trans is cold. Wait for the truck to warm up all the way and you won’t have this problem. Works for my trucks
No it's the switch
I have a 2016 frightliner cascadia it’s automatic some times times I can’t go in to drive or Reverse it’s just stack in N. There are no codes or check engine light and sometimes it works just fine please help
Have found the fix? Cos I'm also having a same kind of issue.. Thanks
Thanks this will be helpful
Thanks for the support.
Hello! Do I need to replace a new shifter if the shifter button not working? It won’t shift to manual from auto while pushing the button.
Probably the transmission manual function is disabled, perhaps you could tell your technician with the DDL software to check it out, if that option is enable then you could check the shifter. Thanks for watching.
@@LetstalkDIESEL Thank you for replying!
Thanks for the info I changed the shifter but it still won’t go in automatic it’s still doing the same staying in manual mode any suggestions
Is the ABS light ON? Or did you check your shifter part number is the same as the old one?
I have same problem but my check engine light comes on and the abs and it stays on manual and it won’t let me put it back into automatic unless I completely turn it off
@@manuel_ppena6538 Try to fix the ABS light issue first, than might help.
Is the procedure the same for 2015?
Yes, it should be the same procedure, just different torx sockets, T30 I think will do the job.
I’m getting Fault Code 14 - Invalid Shifter Range Detection it’s says Trans prim selector
DO you need to update the computer system after replacing the shifter
No, you do not need to update the TCM software after replacing the shifter.
After changing the part my dt12 don't down shift when slowing down. I have to come to a complete stop for it to switch into proper gear.
I changed mine and I have this problem I got code spi 3187 fmi9 and truck inot start and light for the engine Breck on light transmission on the truck is not start
Did you figure out what the problem was ? My truck doesn't show what gear it's in or nuetrual and won't start
I have same problem.
Did you find any solution?
If that part doesn't work properly can it prevent the truck from starting?
Yes, your truck will NOT start if this part fails to switch properly between gears. Usually, the check engine light will turn ON.
@@LetstalkDIESEL thanks for getting back to me, yeah my truck is not starting and check trans light is on, and instead of showing which gear or neutral it has 2 dashes
I have same issue.
Have you find any solutions?