Freightliner cascadia DT12 automatic transmission clutch replacement installation cost components
HTML-код
- Опубликовано: 28 окт 2022
- WARNING!!: ⚠️⚠️⚠️
Always use the proper tools and safety equipment to perform this job.
Failure to perform the job correctly can result in personal injury or vehicle damage.
Don't do this job if you think you don't have the experience or the equipment to do this job correctly. REMEMBER SAFETY FIRST!
Warning!!! ⚠️⚠️⚠️
This video is just a demonstration of the labor to do to perform this job, the results may vary.
Also, the damage found can be greater that expected and it can result in a massive engine failure.
This video contains advance technician information.
keyworks
freightliner kenworth peterbilt international volvo mack western star cascadia coronado t660 t680 t700 579 389 379 589 vnl vn
cummins isx cummins isx15 cummins n14 cummins m11 cummins isb cummins isb DD15 DD13 DD16 Series 60 caterpillar C15 3406 C13 OM 460 OM471 OM472 OM473 mercedes benz atros DD13 DD15 DD16 60 series class 8 truck tractor
Topics discussed:
how to replace a DT12 automatic transmission clutch
why a clutch goes bad
how does a automatic transmission clutch replacement cost
what to do to perform this job
how to program a automatic transmission clutch
symptoms of the fault are:
check engine light on
clutch slips
rpm goes up while driving
vehicle does not move
truck stays in neutral
Tools need:
5/8 socket
1/2 ton+ transmission jack
impact tool (to speed up the labor)
DT12 clutch alignment tool
1/2 socket
15 mm socket
3/8 drive tools
19 mm 12 point socket
etc...
Parts needed
mak sure to use your vin number to get the correct parts. they vary from years and models.
Shop talk:
replacing the clutch in an automatic transmission is not much different that a manual transmission. there are less components to remove and there is a list of tools you need to perform this job correctly. keep on my that not all truck are equipped with the same components so the labor Challenge will increase or decrease depending on that.
Thank you for watching Francisco Amaya RUclips channel
FOLLOW my channel to get more informative videos and use the comment section to share opinions. Also, check my community section of my channel and be part of the surveys and questions about my channel so I can guide my videos in the right direction to give you the best information.
______________________________________________
Now acceping support and donation to my channel.
accepting: personal check, business check, money orders, gift cards, gifts, tools, shop articles, etc,..
send your checks or money orders payable to Francisco Amaya
send your support and donation to:
Francisco Amaya
Via
PAYPAL
www.paypal.com/cgi-bin/webscr...
(remember to add your address at PayPal donation)
OR
CASHAPP cash.app/$FranciscoAmayaYT
Follow me on Facebook
profile.php?...
Follow me on Instagram
/ francisco_amaya_youtube_
Check my channel for more videos and information.
/ @franciscoamayayt
Check my other RUclips channel
I.E. euros
/ @ieeuros
Question!?
Email me
franciscodamaya@gmail.com
______________________________________________
______________________________________________
#franciscoamaya - Авто/Мото
Excellent
Francisco muchas gracias por tus vídeos,
Thanks for the info bro👍. God bless
Very informative
The DT12 is an automated transmission. Automatics have torque converters and clutch packs. Automated transmissions have the same stuff as a standard but a computer does the shifting and there is a push type clutch instead of a pull so an actuator can do the clutching.
Hi Francisco thank you for your video I have a question my question is when you change new clutch and clutch acuator do you setup with computer like calibration,program ? Please write me answer thank your for your answer,
I've got 791,000 on my dt12 clutch. I think about just changing it ahead of time to avoid the tow truck
It happened to me today. 745k no prior warning.
@@Hellokinni oh my, get a quote yet. Can you ask the mechanic how long these clutches can go max? Thanks
@@Hellokinnifor me it happened today 🤦♂️. 806k on the truck. Had to pay $950 for towing. When I brought it to the shop mechanic said we can’t fix it since it’s automatic. I called to the shop before I towed. The only thing guy said in the office “ I apologize, I didn’t know that we can’t fix automatic transmissions”. So I lost $950 for nothing
@@vladislavhusnutdinov1523 The shop replaced clutch on mine and also the shifting mechanism. Said it was seized but as far as I know it was shifting just fine. Oh well but they didn't do the calibration using the computer. The shifting was rough. I guess the ecu has learned and has adjusted but still sometimes in gear 7/8/9 it's not smooth shifting sometimes.
My clutch failed on me today. I think I’m lucky that it happened 8 miles away from a dealership. Tow bill was still expensive. Without warning it shot itself at 860k. i knew, i wanted this job done sometime this year but it beat me to the punch.
Tengo una pregunta, yo tengo un camión automático, y todos los cambios suben bien, pero cuando bajo la velocidad se qeda en el cambio 6 aunqe el camion se aiga parado, y aveces baja en el cambio 5 pero se queda acelerado un poco y baja los cambios,, tienes alguna idea sobre ese problema, gracias
Hey tocayo tengo un problema con un Mac troc en el clutch instale clutch nuevo,nuevo activador y nuevo modulo pero de igual no se mueve oh y según ya lo programaron un. Un poco más de información porgas que devolver hacer de antemano gracias
Would recommend the Dt-12 or a manual?
That was a tire up clutch- how many miles were on that?? Great video!!
After replacing the clutch my truck is vibrating when it works on idle, what’s the problem?
Every how many miles do automatic clutches go bad
Hi Francisco What else you suggest can we replace as preventive maintenance while clutch is being replaced?
clutch, clutch actuator, flywheel, rear motor mounts, rear main seal, dt12 split pin, carrier bearing, pilot bearing, etc,...
some are more important than others but all of this is recommended to replace during a clutch job.
great video! I've heard these Eaton clutches have problems when calibrated after installation. Have you had problems with Eaton clutches especially on dt12 tranny?
so far no problems. I used generic brand the other day and no problems as well. the duration of the these aftermarket clutches can't be as good as the oem, but, when you see the prices of the oem clutches you wanna go straight to aftermarket regardless the quality.
Thanks for your videos. Do you get fault codes prior to this happening on a dt12?
No . Mr Amaya said it happens without notice.
It happened to me today. No prior warning.Had to get it towed. Original clutch lasted 1.2million kms on the truck. It's an automatic
@@Hellokinni have they told you what they are going to replace? Is it just the clutch?
saludos francisco,una pregunta , estas dt 12 son selladas o sea no hay forma de checar el nivel de aceite?? nadie sabe si el aceite de la transmision se cambia ?? le pregunto a mucha gente y nadie sabe decirme, me dijeron que el delear tiene un sistema para cambiarlo con un vacum o algo asi , que se debe cambiar cada 500 k millas , pero en verdad nadie tiene una respuesta ,gracias por tus videos.un abrazo.
Si se cambia. En la pagina de detroit busca una section de maintenance de transmission. Alli te dice cual bolt sacar para revisar y el Que tienes Que sacar para drain el aceite usado.
Se cambia a las 500.000 millas en el dealer , yo lo quise hacer en un taller de un amigo y me recomendaron que no lo cambie por que han fallado muchas transmisiones después del cambio ya tengo 790.000 millas y está todo bien por ahora
Will diagnostic link let you apply clutch without vehicle in motion ? Is there test you can do with diagnostic link without pulling out transmission ?
yes, you go to actions and transmission. you can do clutch learn if you what to calibrate the clutch or if you want to test the clutch functions go to Detroit transmission clutch center i think is its name. you can test the clutch journey and response.
Muy buenos los comentarios y repuestas tengo una pregunta para bajar la trasmission se tiene que bloquear con la computadora y poder retirarlo
after how many miles is it suggested to replace the clutch ?
and what is the oem part number for 2016 cascadia 125 evolution 14.8 ?
do i need to change the actuator with the clutch ?
and what is part 1 & 2 ????????
I have same truck and I replaced both it’s to expensive
@@21dt66like how much do you spend
How much?
Buen video puede hacerlo en video
En español quisiste decir.
Si
How long do automated clutches on cascade as usually last?
it varies, usually around 700k miles.
Yes mine died today 745k
Mine at 735k
Mine had to replace it at 845k
Mine at 570k
Only $1600 at empire Slidell la