Problems with 2014 Freightliner Cascadia with DT12 transmission

Поделиться
HTML-код
  • Опубликовано: 24 дек 2014
  • via RUclips Capture

Комментарии • 93

  • @Familyfun2006
    @Familyfun2006 4 года назад

    Could this be the same issue as always I warm the truck up sometime the dt12 goes in to Dr or rev very slow when I switch the shifter I did replace new shifter check engine light does not come back anymore so far

  • @sapil7944
    @sapil7944 7 лет назад +8

    Guys, there might be different reason for similar issues. Truck not going into gear or dropping down into neutral gear could be just computer problem not recognizing which gear it needs, or it could be clutch slip/clutch disengagement. What you can do IS check your code. Push the key and turn into ignition few times quickly and your screen should show a code. if it is 26 or 27 then it is clutch issue.

    • @duleiraldaloi
      @duleiraldaloi 4 года назад +1

      I put a new clath and cover everything new still not sheting gear, and now they want chrge me more just only not shefting ?

    • @adhanomtesfamariam2525
      @adhanomtesfamariam2525 Год назад +2

      @@duleiraldaloi so how you fixed at the end

    • @duleiraldaloi
      @duleiraldaloi Год назад +1

      @@adhanomtesfamariam2525 sorry for late was the transmission wire harness problem

  • @simonteklebrhan9562
    @simonteklebrhan9562 2 года назад

    What could be the problem the same thing happened during morning time in my 2017 Frightliner cascade automatic transmission.
    What could be the problem?

  • @sistabigbone5822
    @sistabigbone5822 3 года назад +8

    We need to start a class action suit

  • @melvinrexwinkle1510
    @melvinrexwinkle1510 3 года назад

    Does anyone know anything about swapping out a dt12 for a eaton amt13

  • @dayzinamerica
    @dayzinamerica Год назад

    i have an emergency question if you can help please … I have 2016 Cascadia with dt12 automatic transmission and my shift controller on the transmission is damaged … does that make my truck not to start at all ?????????????????????
    the guy who checked my truck with the computer said so but I kind of have a doubt as it doesn't make sense unless if you confirm
    i also changed the cpc4 and reprogrammed it to my vin and still doesn't start the truck and that's the only error it's showing
    just to mention ... the cpc was changed as it was stolen from my truck and i bought 2 used ones ... one is not programmed and it does crank my truck but won't throttle or put gear on .. and the second one is the programmed to my vin and doesn't crank the truck at all

  • @Amir-ky5db
    @Amir-ky5db Год назад

    hi how are you man my brother having the same problem how did you fix it

  • @marcuscrossgrove6272
    @marcuscrossgrove6272 5 лет назад +2

    Its an issue and needs to go to shop. But if u needs to move it out drive to shop, u need to put transmission in neutral and turn engine of for 10 to 15 mins then crank back up and then try to put in drive. If it doesn't go in drive then put in reverse and it should go in. But whenever it does just do not turn engine off until u reach ur destination. It will stay in drive until turned off

  • @AkashVerma-tw4rk
    @AkashVerma-tw4rk 2 года назад

    How much it cost to fix it ?

  • @Jimmy-on1er
    @Jimmy-on1er 5 лет назад +9

    What people don’t understand is. Automatic transmission you need to let the truck warm up. Water temperature is down to 0 and you want the transmission to do its thing. Not happening. Warm the truck up and try again my friend

    • @cryptochannel5754
      @cryptochannel5754 5 лет назад

      Jimmy bro, I’m running my truck for hours right now so it would work fine and it doesn’t.
      It’s clearly broken, don’t you see?

    • @rustychukadze6456
      @rustychukadze6456 2 года назад +1

      I have the same problem the problem goes away only when i warm my truck good temperature is up 80 F then truck runs good before that it won’t shift form 6-7 it goes back to 5,6

    • @raminshahin2440
      @raminshahin2440 6 месяцев назад

      did you find problem what was the issue, mine is the same at gear 6 - 7 ??@@rustychukadze6456

  • @imnotmelvin3
    @imnotmelvin3 9 лет назад

    So what happened?

  • @brad300ZXS16
    @brad300ZXS16 8 лет назад +3

    I have one now with USX. This damn thing can't decide what gear it wants when coming to a stop and I have to manually shift it going up a hill heavy. I'd rather have a manual transmission and I will never sit two days at a dealer like one of you said. I'd leave the damn truck there for someone to go get! Mercedes Benz will never have me as a customer either because they own freightliner. If that's how their service is too, I'd never own a benz.

  • @JisINSANE3
    @JisINSANE3 7 лет назад +2

    mines currently at the dealer with the same problem as well as numerous other stop engine problems, Mine would refuse to go into gear and just fart sound like it was trying to find a gear. Once it warmed up it started working problem free with no issues unless it started running hot in the summer pulling 45k loads over the mountains and temps hit 250f+ Then it would just dog out and fart the same way.

  • @Victor_679
    @Victor_679 6 лет назад +7

    Same problem but Only in the cold morning . Have to wait till shiftgear get warm at least 81°F than goes better

    • @faisalghafoor1413
      @faisalghafoor1413 3 года назад +1

      Yah after 50 to 60 mils it’s go better

    • @Victor_679
      @Victor_679 3 года назад +1

      Hehh))) now I'm driving on 13 manual shifting and have no any broblem with automatic faults, holds and errors

    • @Victor_679
      @Victor_679 3 года назад

      Heh))) now I'm driving on manual 13 shift and have no any broblem with anoint automatic faults and holds

  • @fahaddtl
    @fahaddtl 9 лет назад

    I have a same problem and sitting at freightliner for 2 days. How did you get it fix. What was the problem?

    • @Amir-ky5db
      @Amir-ky5db Год назад

      hey how are you man I have the same problem how did you fix it

    • @JW-ws5wm
      @JW-ws5wm 10 месяцев назад

      @@Amir-ky5dbI have the same problem, how you got it fixed?

  • @zafarjon130119
    @zafarjon130119 4 года назад +5

    You should warm it up a little more. I have exact same problem. After 10 hours of truck being off, I usually warm it at least 20 monutes. Once the water is between 0-100 F the truck shifts better.

    • @TheGandra
      @TheGandra 2 года назад

      Same problem here. What was the issue?

    • @sadikkucuk3207
      @sadikkucuk3207 2 года назад

      Thanks 🙏 sir .. I TRYED A LOT OF SOLVING BUT I DID NOT .. AND THAN I WARMED IT UP .. MY PROBLEM disappeared immediately

  • @erichilton2364
    @erichilton2364 5 лет назад +7

    This is a split pin issue, once the trans is warmed up the pin moves freely. There is a fix for this now, all trucks that experience this issue can be fixed at no charge at your local FTL dealer as long as the truck is within warranty still (5 years 750K miles).

    • @duleiraldaloi
      @duleiraldaloi 4 года назад +1

      what is the spilt pin now one shope charge me $8000 still not fixebul min auto trans freightliner cascadia?

    • @serapkatircioglu
      @serapkatircioglu 4 года назад

      Eric Hilton hi, we're here at the service now for this same problem. I showed them this video and comments, I said this should be split pin problem as people say here on comments and can you please change it? They said, it has main shaft sensor code. So they say they can't change split pin just because I tell them.
      What should I do ??? Please help me with ideas?
      Thanks

    • @kidanezere9607
      @kidanezere9607 4 года назад

      Hello brother or sister I get the same issue exactly with yours when I set up on drive it's really getting crazy and also truck so slow so what should I do to fix it can I get some ideas!!!

    • @kulyabskyg2793
      @kulyabskyg2793 Год назад

      @@serapkatircioglu it’s 3 years passed, what was the issue? Did you find out? Thanks

    • @kulyabskyg2793
      @kulyabskyg2793 Год назад

      @@serapkatircioglu Selam Serap kardes. Neymis derdi, tamir edebildin mi? Yardimci olursan sevinirim. Tesekkurler.

  • @56wb56a
    @56wb56a 6 лет назад +3

    Hey we have the same transmission and everytime we press on the brakes or put it in drive or reverse it lets out air from the transmission is that normal?

    • @zpk450257
      @zpk450257 4 года назад +1

      Yea the shift selector is a pneumatic driven

    • @ziondizzy2011
      @ziondizzy2011 3 года назад

      Yes

  • @mahera7375
    @mahera7375 7 лет назад

    what was the problem and how you fixed ?

    • @christopherscott864
      @christopherscott864 5 лет назад

      Thank you for asking the right question. I guess we park and wait.

  • @michaeldonaldson6993
    @michaeldonaldson6993 7 лет назад

    anyone seen dt12 trans stuck in reverse

  • @sunjulee1895
    @sunjulee1895 6 лет назад +9

    I replaced busing split pin.
    Now it is ok.

  • @MichaelBelenski
    @MichaelBelenski 4 года назад +2

    Let the water temperature rise to 120⁰ degrees Fahrenheit you'll be fine.

  • @USATruckersUSA
    @USATruckersUSA 4 года назад +4

    Need to replace transmission bushing split pin

  • @kpelkey6829
    @kpelkey6829 7 лет назад

    mine's doing the same thing it did come out of it for now dealer said there was a bushing inside the transmission that they have had problems with does anyone mind commenting on what they found out

    • @firstname6208
      @firstname6208 7 лет назад

      yes there is an update, one of the shift forks pivot in an aluminum boss (case housing) it gets worn . fix is to get repair kit- remove trans from truck pull left side off trans case , remove shift fork, ream housing install brass bushing and reassemble. newer trans have the brass bushing from the factory.

  • @ziondizzy2011
    @ziondizzy2011 3 года назад +1

    This guy is the definition of seat meat

  • @balrajsamra6164
    @balrajsamra6164 6 лет назад

    Same problem with my truck 2017 freightliner pulling out trany to replace some split pins...

    • @MannyGeb
      @MannyGeb 5 лет назад

      Did you get it fixed at a dealership? And how much, i have the exact same issue.

    • @erichilton2364
      @erichilton2364 5 лет назад

      @@MannyGeb its covered underwarranty. 5 years 750K miles. Take it up to your dealer and they will get you squared away.

    • @duleiraldaloi
      @duleiraldaloi 4 года назад

      did you fix problem

    • @hajimm2815
      @hajimm2815 3 года назад

      What was the issue?

  • @Yyyyyyyyyyyyy808
    @Yyyyyyyyyyyyy808 4 года назад

    That's the problem not enuff gas....😄😄😄

  • @ram03rod
    @ram03rod 6 лет назад +4

    I would hate to be going down a grade when the trans. acts up like that!

  • @ted3744
    @ted3744 7 лет назад +3

    there is problem with transmission wiring inside.
    it happen with 5 of my trucks. you have to replace wiring inside transmission case.WIRES are touching something inside, there is nothing you can do. shake the truck really good, by giving it a pull or push, and it will work till next time,
    it can happen every hour, or it can happen only 1 time per month,

    • @kidanezere9607
      @kidanezere9607 4 года назад

      Hi I get same problem with you guys my truck is freightliner cascadia 2016 when I set up on D it just jumped to Neutral and so many numbers come up on the dashboard finally the truck doesn't move so slow so how do I fix it

    • @ted3744
      @ted3744 4 года назад

      @@kidanezere9607 it was covered under warranty, but every time it brakes down , we have to tow it to dealer, and when it gets there, it works fine. until i figured out how to show problem to dealer, let the truck sit for couple days OFF , and then finally dealer see problem , starts and not working

    • @kidanezere9607
      @kidanezere9607 4 года назад

      @@ted3744 wwww you're lucky your warranty cover it they cost me $ 9000 for fix it

    • @TheTeto2213
      @TheTeto2213 2 года назад

      M

  • @markjastowski9057
    @markjastowski9057 4 года назад +2

    Replace the split pin

  • @zilkany
    @zilkany 7 лет назад

    I drive volvo vnl 300 with i- shift automatic 12 gears 4 years 361000 miles and no one problem so far.

  • @bigj200016
    @bigj200016 3 года назад

    I’m having the same problem.

    • @Amir-ky5db
      @Amir-ky5db Год назад

      hey how are you how did you fixed it I have same problem

    • @bigj200016
      @bigj200016 Год назад

      @@Amir-ky5dbhop had to reflash the TCM

    • @Amir-ky5db
      @Amir-ky5db Год назад

      thank you

  • @zilkany
    @zilkany 7 лет назад +2

    This is Benz transimision build in Detroit need more time to teach workers how to work right .probably they work with pfone in other hand.

  • @bacterie360
    @bacterie360 8 лет назад +2

    the cluch is finish

  • @fahaddtl
    @fahaddtl 7 лет назад +11

    always warm your truck for 30 min. this problem won't happen

    • @fahaddtl
      @fahaddtl 7 лет назад

      water temp is so low. warm the truck.

    • @fahaddtl
      @fahaddtl 7 лет назад +2

      I had same issue. Transmission start working good after I warm up and water temp go up.

    • @fahaddtl
      @fahaddtl 7 лет назад

      xxpr0nag3xx
      agreed

    • @richardvaughn2705
      @richardvaughn2705 7 лет назад +2

      xxpr0nag3xx the dt12 uses air pressure to shift. It's basically a 12 speed manual with air operated shifting forks.

    • @marcuscrossgrove6272
      @marcuscrossgrove6272 5 лет назад

      Right, thats really whats supposed to be done but frieghtlinr claims " these new automatics r designed to not need warming up like the oldr engines".
      They claim its ready to go aftr air pressure is fully charged. Yeah right.
      I totally agree u r supposed to let any diesel warm up at least 30 mins.

  • @Amir-ky5db
    @Amir-ky5db 10 месяцев назад

    i Sell the truck I don't know the problem

  • @apples1
    @apples1 3 года назад +1

    I had the same issue.. It’s becoz of truck is cold you need to warm up the truck to 100

    • @ziondizzy2011
      @ziondizzy2011 3 года назад

      Most drivers have no clue of mechanical engineering what do you expect?

    • @rustychukadze6456
      @rustychukadze6456 2 года назад

      yes if u have same problem warm up 1 our that halps , but next cold morning still the problem there it doesn’t go way.

  • @dontrustwhiteyevery1
    @dontrustwhiteyevery1 3 года назад +2

    First problem is it's an automatic.....

  • @Kingsr92
    @Kingsr92 Год назад +1

    I Have a code on my dash saying
    Gear Pos. Sensor Problem Detected Shifts Inhibited
    2015 automatic Frieghtliner cascadia
    Which it’s not allowing me to go into to gear once I go into gear it just Beep
    I had water in my air tanks I had to drain out
    It started to work but next day
    Same thing happened
    Fault code spn 521485 fmi 2

  • @hudsondonnell444
    @hudsondonnell444 5 лет назад +2

    Pull POS transmission replace with Eaton-Fuller Super 18, learn to shift.

  • @Kingsr92
    @Kingsr92 Год назад

    I Have a code on my dash saying
    Gear Pos. Sensor Problem Detected Shifts Inhibited
    2015 automatic Frieghtliner cascadia
    Which it’s not allowing me to go into to gear once I go into gear it just Beep
    I had water in my air tanks I had to drain out
    It started to work but next day
    Same thing happened
    Fault code spn 521485 fmi 2