I sold my soul to kiss a long time ago. Been using the simple camera osd for a long time and always thought it was enough. But now I want this on my reverb so much.
Professor FinalGlideAus in the house . Good to see ya ! My next 6 inch build will need your guidance . As well as helpful others . Looking forward to it .
FinalGlideAus yeah...i probably would have peaced out on that....my patience would have given out. I haven't used a kiss board but steele raves...and a few others.... I want yours..(your frame).and i think i will use kiss for it....i know nothing about it other than just listening to you guys. Its nice to see you around btw. You are one of the most down to earth of all the high profile crowd.
Jeff Venable cheers mate, I appreciate the kind words. There will be a full build video coming out soon so that might help with building if you decide to give it a go.
This is all very well and good, but like trying to get hypetrain motors in the UK, will it become a unicorn. Out of stock Out of stock for months on end!
Where I see this is in the Graupner shop if it was able to support the Graupner Falcon reciever supplying it with full telemetry.. Very interesting... You should investigate Graupner to see if they are interested in a version..
I was going to buy the alien butter kwad off your store but I noticed that it has recently been taken of the site. Is this a process of putting it back into stock or is it no longer being sold on the rotor riot store? Thank you.
definitely buying, now would i solder my vtx, receiver, and camera wires to the pdb or to my FC? ive never had a pdb , just AIO FC's. dont laugh im only 4 months into the hobby lol and also, in order to utilize the microphone, do i need to do anything specific or just plug my earbud in and it will work
Hi, is there any way to get the RSSI-Value in the OSD with Wolf PDB V3 and SPort(RXS-R) ? Read that this is only possible throuh an analog input ..???? There are a lot of people struggling with that issue. KISS & Wolf PDB V3 claims to be "Super-Simple" - but why is such an important value that hard to get on my OSD ??? btw .: on my Taranis Telemetry is working properly (s-Port is soldered on telemetry of Kiss FC V2) , I´ve set an alarm, but I prefer to have RSSI on my OSD ! Is there any solution ??? The GUI is really wonderfull, all the other stuff works properly.
Yeah, I have been looking and haven't found anything. The Wolf github page has a file you can download and print out that is suppose to show the footprint of the PDB, but the scale is either way to big or way to small. I haven't had a change to try and scale it to the correct size. It does seem to fit the Chameleon frames though. Let me know if you find anything.
Wolf will fit , I had and old Steele PDB and it fits between the arms by a few mm on each side so wolf will definitely fit . Will be ordering one in the next few weeks
Good to see you are so amped about this pdb :) this video reminds me of the RR vid where you assembled the alien, I think your enthusiasm is why i got into the hobby :) I just purchased the PDB today, just wondering what GPS is recommended to use ? also does it have an onboard barometer ? just wondering what to look out for when conformal coating it
Thanks mate. This is the first PDB that has convinced me to run an OSD. No onboard barometer. GPS altitude is a much simpler and accurate enough for most operations. All you'll need to watch out for on the board with regards to conformal coating is the connector. As for GPS module, there are many to choose from and it all depends on what you are after. Something like the M8N is a good one but I would ask the long range groups also.
The noisy clicking issue unfortunately is directly related to smart audio and not something an OSD can fix. Other telemetry setups like on the Tramp don't have this issue.
Thanks a lot, Do you know how it can be ordered? I also use the TBS jello guards at the moment and don't like the mounting I use now... This one looks way better! (Never mind found it ;) )
Thanks! I already found it, they put them on there site ;) www.brain3d.co/products/nd-filter-session-mounts-tbs-jello-guard-filter?variant=7533995687966 You can choose from a several frames or universal ;)
Damn I have the reverb and wanted to use my kiss stuff but dropped 100 bucks on a hobbybwing because it was a pain not having something that works well with kiss and saving spaced
Maybe look at some 1mm (or what ever thickness is needed to clear) double sided tape to stick it down. That's what I would do. Then you would just need some strain relief for the battery cable.
I’ve got the Steele pdb in two Stingy’s with a setup kinda like Chad mentioned, so I’m sure it will work with this pdb as well. I can’t wait to get my hands on one to try out! Great work Chad!
Ian Bailey You would have to ask ImpulseRC for the specifics. I think it has something to do with them not having access to flightone’s code to be able to clachieve what is needed among other things
I don't care if people know Im wearing pants, It's when I have to wear my adulting pants because of other people & I dont wanna that gets me.... Good to see ya back & about, hope to see more of you soon! :)
I prefer to meet Devil-Dodgers/God-Botherers/Door-toDoor Sales with no pants on- claims of 'shift worker' tends to mollify their outrage without reducing the brevity of their stay & usually in a hasty apology trailing a hasty retreat... I tend not to think about the feels too much.........'cause my Mummy always thaid I wath thpethial! * *Flies mode3... :v
Great product, I already ordered one. But I have to say, as an electrical engineer I'm always triggered seeing MW and MAH instead of mW and mAh. It's right in the GUI and I know that you guys are doing it because it "looks" better and more consistent. But yeah, nonetheless, Im triggered :D
For real I am right there with you! Trust me, we have had this conversion. The real issue is the limited character space in the memory of the OSD chip, we sadly just don't have as much space as we would like. Believe me though, I have an issue with this and I won't let it go, hopefully we can fix it in an update lol
So is it an FC too? I'm joking, I don't think it is. But this board is doing a lot of what FCs are controlling today. So there is a comm link between the FC and the this "pdb" (more like an mini FC)? Where this PDB is more like a QC.... Quad Controller.... You LikeThat? has to be, its doing way more then a typical PDB/OSD... like giving BF FCs more Uarts = mind is blown = game changer? Get BLHELI_32 support ASAP....... Sorry that was a lot
for real though, i just woke up forgot my glasses and saw that VAS antenna poking up from the taranis lol, i actually thought you had modded it onto the gimbal, and really nice PDB!!!
ImpulseRC hey man don’t wanna mislead anyone here.. I have seven working quads, all of them are Impulse RC Alien’s 👽, all of them have the Steele PDB and all of them have the Kiss v2 flight controller. I’m 100% satisfied with every single one of them. I just think it’s interesting how everyone always compares it to Betaflight and I just see no comparison what so ever... Kiss all the way, Alien All the way. This is the first time I’ll be building a different quad and it’s a Reverb , I’ve been waiting for this PBD since the Reverb was launched!! 🤘😝
Unfortunately this PDB does not fit my Rooster neither my AstroX X5, it needs to be attached with double sided tape on flat carbon. Any frame that has excess of bolts or does not have the appropriate shape cannot accommodate this PDB. Well annoyed especially since Chad mentioned that this can be used with many frames.
I don’t need this because I fly FlightOne and I want to be the best lol really tho this is great I think people will start using non all-in-on flight controllers now knowing they have a reliable PDB With osd
Good to see you back Chad. 👍
Omgdoosh finalglide is back!
Hell yes, haven't seen Chad in a while. Glad to see you back.
I sold my soul to kiss a long time ago. Been using the simple camera osd for a long time and always thought it was enough. But now I want this on my reverb so much.
Thanks for sharing this back in July Chad. Greatly appreciate this even months later. Went and got a Reverb and wanted to KISS it...
I thought "A PDB with an OSD, what's so special about that?"
Then I watched the video - wow, massive box of tricks in a tiny little package! Way cool.
Professor FinalGlideAus in the house . Good to see ya ! My next 6 inch build will need your guidance . As well as helpful others . Looking forward to it .
Great to see Chad Back! That should be his new tag ChadBackBoomFPV
Once Chad is back in the game Rotor Riot feels like Rotor Riot. MVP
This was sincerely a treat..... welcome back Chad !!!
OMG OMG OMG! really impressed Alex and Sean! I cant wait to get my hands on one (or more) of these!
Been testing this OSD PDB for a few weeks and I can say it's FREAKING AWESOME!
VIK FPV it’s look great !
Hey. Can You please suggest FC to use with this OSD/PDB? Thanks~!
pliskanova kiss fc v2!
Thanks, was thinking along those lines ;)
Loved it before and now it's just wow
Does it run doom?
ImpulseRC OML, I’M DYING😂😂
Auzzie auzzie auzzie oi oi oi!
Glad 2 c u back duuuuude!
Been wanting something like this for a minute!!
FAT minute
Great seeing Chad back!
Best PDB I've ever seen.
Great stuff man. Looked hot in the studio
I'd been filming for 8 hours by then with the air conditioning turned off because it was too loud. :)
FinalGlideAus yeah...i probably would have peaced out on that....my patience would have given out. I haven't used a kiss board but steele raves...and a few others....
I want yours..(your frame).and i think i will use kiss for it....i know nothing about it other than just listening to you guys.
Its nice to see you around btw. You are one of the most down to earth of all the high profile crowd.
Jeff Venable cheers mate, I appreciate the kind words. There will be a full build video coming out soon so that might help with building if you decide to give it a go.
Good to see you back Chad.
Is that chad the mos optimistic FPV pilot ever :D good to see your back!
When’s the monthly highlights comin😕?
I absolutely love mine! Highly recommend it!
Awesome PDB. I am assuming it's the same size as the Reverb PDB? If so, too bad... it's not compatible with my frame (Rooster).
great to see you chad. missed u lots.
what an awesome surprise...
Are there any plans to possibly make this work with dji digital system?
Damn man where you been???
i missed you Chad!! good to see a new video from you :)
This is all very well and good, but like trying to get hypetrain motors in the UK, will it become a unicorn. Out of stock Out of stock for months on end!
Where I see this is in the Graupner shop if it was able to support the Graupner Falcon reciever supplying it with full telemetry..
Very interesting... You should investigate Graupner to see if they are interested in a version..
I was going to buy the alien butter kwad off your store but I noticed that it has recently been taken of the site. Is this a process of putting it back into stock or is it no longer being sold on the rotor riot store? Thank you.
Missed you Chad!
The background in that configurator, it looks like a snapshot from the Ibiza trip?
That is a frame stolen from a video of one of our pilots SchemenFPV, check out his stuff he is pretty good!
Yes it's from the Ibiza trip :)
Does the board provide clean filtering for vtx & cam power? Also how accurate is the current sensor has it been pre-calibrated?
Yes it has filtering for VTX so you have clean video. The sensor is pre-calibrated and very accurate.
FinalGlideAus Cheers fella
Awesome pdb. my next for sure.
Is it still necessary to use a capacitor with the Flyduino KISS 32A 32 Bit ESC running on the Wolf PDB?
Awsome product ! Nice work
there is so much info on OSD I need a copilot
i wasn't too excited at first seeing the press release for this pdb, but with chad running down through all the features it piqued my interest
definitely buying, now would i solder my vtx, receiver, and camera wires to the pdb or to my FC? ive never had a pdb , just AIO FC's. dont laugh im only 4 months into the hobby lol
and also, in order to utilize the microphone, do i need to do anything specific or just plug my earbud in and it will work
Vtx and camera go to the PDB. Receiver goes to the FC still. There will be a full build video coming out soon.
thanks for the quick response. as far as microphone i would solder vtx audio to a pad on the pdb i assume?
Correct. There is a mic on the PDB
work it with the iFlight KISS AIO FC plug and fly?
Will this work on Raceflight or Raceflight One FCs
Sorry if it's been answered but what about updates for the Helix?
We're working on it, stuff is coming :)
ImpulseRC much respect for the follow-up.
is it smart audio capable with a kiss v1 and a tramp hv vtx?
Can you run betaflight on the f3 chip
Hi, is there any way to get the RSSI-Value in the OSD with Wolf PDB V3 and SPort(RXS-R) ? Read that this is only possible throuh an analog input ..???? There are a lot of people struggling with that issue. KISS & Wolf PDB V3 claims to be "Super-Simple" - but why is such an important value that hard to get on my OSD ??? btw .: on my Taranis Telemetry is working properly (s-Port is soldered on telemetry of Kiss FC V2) , I´ve set an alarm, but I prefer to have RSSI on my OSD ! Is there any solution ??? The GUI is really wonderfull, all the other stuff works properly.
Anyone try this on a rooster frame? Curious how it fits..
also waiting to buy on of these for my rooster but unsure of fit
Yeah, I have been looking and haven't found anything. The Wolf github page has a file you can download and print out that is suppose to show the footprint of the PDB, but the scale is either way to big or way to small. I haven't had a change to try and scale it to the correct size. It does seem to fit the Chameleon frames though. Let me know if you find anything.
Wolf will fit , I had and old Steele PDB and it fits between the arms by a few mm on each side so wolf will definitely fit . Will be ordering one in the next few weeks
Nice overview Chad 😁
I need these in my V2 KISS’d reverbs for sure!
So it does not work with KISS V2?
Works with both V1 and V2.
Will it work with a raceflight skitzo fc?
It is not compatible with RF
Good to see you are so amped about this pdb :) this video reminds me of the RR vid where you assembled the alien, I think your enthusiasm is why i got into the hobby :) I just purchased the PDB today, just wondering what GPS is recommended to use ? also does it have an onboard barometer ? just wondering what to look out for when conformal coating it
Thanks mate. This is the first PDB that has convinced me to run an OSD. No onboard barometer. GPS altitude is a much simpler and accurate enough for most operations. All you'll need to watch out for on the board with regards to conformal coating is the connector.
As for GPS module, there are many to choose from and it all depends on what you are after. Something like the M8N is a good one but I would ask the long range groups also.
Awesome mate, after watching this video it certainly does look impressive. I look forward to installing it :)
is there an ETA for a mac version?
Basic updater version is coming out in the next few days I am told. I'm sure that will be evolved more soon after that.
awesome! looks dope!
It's basically done we just haven't had much chance to test it, once we are a little more confident we will push it out there :)
Yay my favorite Aussie has returned now for Sasquatch I mean Carlos
1. good to see you back Chad!
2. is microphone Audio and smart Audio possible together now? Maybe i missed this Information in your Video.....
The noisy clicking issue unfortunately is directly related to smart audio and not something an OSD can fix. Other telemetry setups like on the Tramp don't have this issue.
Oh and thanks :)
Chad, what gopro session mount are you using and wich ND filter is it? As I assume there is an ND filter in fitted in the mount?
It's the Brain 3D mount for the Reverb running 30 deg tilt. It is a special order version to allow the TBS Jello guard to be installed as well.
Thanks a lot, Do you know how it can be ordered? I also use the TBS jello guards at the moment and don't like the mounting I use now... This one looks way better! (Never mind found it ;) )
I would contact Brain3D for how to get one
Thanks! I already found it, they put them on there site ;)
www.brain3d.co/products/nd-filter-session-mounts-tbs-jello-guard-filter?variant=7533995687966
You can choose from a several frames or universal ;)
Damn I have the reverb and wanted to use my kiss stuff but dropped 100 bucks on a hobbybwing because it was a pain not having something that works well with kiss and saving spaced
We miss you Chad!
Will this gui work for Mr Steele pdb?
No
anyone know if this will fit on a rooster?
you said "automatically" like 6 times in 3 sentences, but I am VERY VERY PSYCHED about this finally coming out
I'm not clear on weather or not it's compatible with both kiss FC v1 and v2
It is compatible with both V1 and V2
FinalGlideAus thanks chad
Welcome back Mr FinalGlideAus :D
CHAD IS ALIVE. This PDB seems like all the extra features we wanted... on a double stack quad...
I’m out of luck since I run a Stingy... 😀
I've not tried but you may be able to fit it in a Stingy with some spacing above the press nuts.
FinalGlideAus thanks Chad. I’ll go and take a look at spacing options!
Maybe look at some 1mm (or what ever thickness is needed to clear) double sided tape to stick it down. That's what I would do. Then you would just need some strain relief for the battery cable.
I’ve got the Steele pdb in two Stingy’s with a setup kinda like Chad mentioned, so I’m sure it will work with this pdb as well. I can’t wait to get my hands on one to try out! Great work Chad!
thx! Buying 2
Looks awesome, I needed an excuse to build a new quad. :)
I have been waiting for that.....
Good to see FGA 👍👍👍👍👍👍👍👍
it has all the things!
works with flightone?
No.
FinalGlideAus bummer no flight one, now the question is why not?
Ian Bailey You would have to ask ImpulseRC for the specifics. I think it has something to do with them not having access to flightone’s code to be able to clachieve what is needed among other things
thanks for the answer
Of course it’s sold out. I wouldn’t have expected anything less. When’s the next batch?
Shouldn't be longer than 2 weeks :)
I don't care if people know Im wearing pants, It's when I have to wear my adulting pants because of other people & I dont wanna that gets me....
Good to see ya back & about, hope to see more of you soon! :)
I prefer them to think I'm not wearing pants. Makes me feel... special.
I prefer to meet Devil-Dodgers/God-Botherers/Door-toDoor Sales with no pants on- claims of 'shift worker' tends to mollify their outrage without reducing the brevity of their stay & usually in a hasty apology trailing a hasty retreat...
I tend not to think about the feels too much.........'cause my Mummy always thaid I wath thpethial! *
*Flies mode3... :v
ok now we know chad is alive, time for charpu
I am Charpu :)
Chad is back!!! OMG!!!!!!
Chaud IS back !!! This IS The news
Great product, I already ordered one. But I have to say, as an electrical engineer I'm always triggered seeing MW and MAH instead of mW and mAh. It's right in the GUI and I know that you guys are doing it because it "looks" better and more consistent. But yeah, nonetheless, Im triggered :D
For real I am right there with you! Trust me, we have had this conversion. The real issue is the limited character space in the memory of the OSD chip, we sadly just don't have as much space as we would like. Believe me though, I have an issue with this and I won't let it go, hopefully we can fix it in an update lol
So is it an FC too? I'm joking, I don't think it is. But this board is doing a lot of what FCs are controlling today. So there is a comm link between the FC and the this "pdb" (more like an mini FC)? Where this PDB is more like a QC.... Quad Controller.... You LikeThat? has to be, its doing way more then a typical PDB/OSD... like giving BF FCs more Uarts = mind is blown = game changer? Get BLHELI_32 support ASAP.......
Sorry that was a lot
ITS CHAD HES BACK HES BACK MORE CHAD
Who are you looking at for EU distribution?
why the hell is there an antenna on your taranis :OOO
Better reception...
for real though, i just woke up forgot my glasses and saw that VAS antenna poking up from the taranis lol, i actually thought you had modded it onto the gimbal, and really nice PDB!!!
i thought you left RR??
Nice!
He's not dead!!!
Glad to see ya Chad! ;)
CHAD IS BAAAAAAAAAACK😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀
Need one
Can it make me a grilled cheese sandwich 🥪 too :-)
Super cool man! Nice 👍
Had to be first on that one ;)
You're FAMOUS NOW! =D
*Yaw
Was something happed to Chad ???
Lol KISS still doesn't have an osd...
It does now, and it's pretty damn good too...
Who need separate pdb in 2k18?
Most of popular FC have pdb, osd, blackbox on board. And all osd funtcions have BF since 3.0.* frimeware.....
NiFkaa FPV yup, and they ALMOST fly as good as Kiss...
Sadly their built in OSD isn't almost as good however, nothing wrong with BF OSD for what it does but this is in a different league.
ImpulseRC hey man don’t wanna mislead anyone here.. I have seven working quads, all of them are Impulse RC Alien’s 👽, all of them have the Steele PDB and all of them have the Kiss v2 flight controller. I’m 100% satisfied with every single one of them. I just think it’s interesting how everyone always compares it to Betaflight and I just see no comparison what so ever... Kiss all the way, Alien All the way. This is the first time I’ll be building a different quad and it’s a Reverb , I’ve been waiting for this PBD since the Reverb was launched!! 🤘😝
Unfortunately this PDB does not fit my Rooster neither my AstroX X5, it needs to be attached with double sided tape on flat carbon. Any frame that has excess of bolts or does not have the appropriate shape cannot accommodate this PDB. Well annoyed especially since Chad mentioned that this can be used with many frames.
Is this your studio? Not familiar with setting.
I don’t need this because I fly FlightOne and I want to be the best lol really tho this is great I think people will start using non all-in-on flight controllers now knowing they have a reliable PDB With osd
Doz3R FPV Agree
Doz3R FPV is it not compatible with RaceFlight?
Why not just make a FC with all that
there are literally no betaflight FC's that dotn have an OSD
Shut up and take my money 😂
Can you make the GUI work on Android too please. I don't want to have to carry my laptop around 😎🤘 @finalglideAus @rotorriot @impulserc
You only require the app to update FW. That won't be something you need to do often. Everything else can be done via your googles and stick inputs.
Why do we need a PDB..
Ahhhh. The final piece of the prophecy has been fulfilled. Super nice
And the no pants assumption is still the safe bet
Hello FianlGlide