My new settings after season 4: ruclips.net/video/K8ZaY-L_btE/видео.html These settings Are NOT THE BEST for everyone, they are just recommended, what the first half of the video to learn how you can make best settings yourself. Overwatch 2 tutorials: ruclips.net/p/PLfzrQ3H5ECSatfRENts2PnMUWDwdQEAG5 Buy me a coffee: ruclips.net/channel/UCzoK1582e2w41kUG0MnUOzwjoin Join Our Discord Server: (English only) discord.com/invite/ykkWZGrV29 Telegram Channel: t.me/Danielzh1
Great, great guide! I obsess about my settings and have been frustrated that the game doesn't explain what each setting does, so this guide was really helpful. Ok some characters it improved my performance, for example Widowmaker. A few of them I can't use (for example I need to be able to turn around 180 degrees on Tracer and Genji).
Thanks Jesper! I'm glad it helped, also I recommend keeping Aim Assist strength at 99 and lower most of the time, using 100 make it sticks so hard and ruins your aim
Nice video! I like your explanation and reasons for the aim setting - its always nice to hear different perspectives on the topic as I've been adjusting the settings for years! Aim ease in is not a deadzone slider, however it gives that illusion by making small movements less sensitive. As David mentioned here in the comments, aim ease in changes the steepness of the aim curve. Aim ease in at 0 on linear ramp should be a perfectly straight line from 0% to 100% move speed with 0% to 100% stick movement. Increasing the aim ease in changes the shape of the aim from a straight line to a curve, so the more you increase the aim ease in the more that linear ramp behaves like exponential ramp. I would even go as far to say that 100% aim ease in on linear ramp is exaggerated enough to feel like dual zone, where you can't really move the crosshair for much of the joystick range of motion, and then suddenly the speed ramps up as you near full stick deflection. You said you were not sure what the word exponential meant in one of your last videos; I'd suggest looking at maths to visualise and see the difference between an exponential function and a linear function but a simple TLDR; exponential is a curve and linear is a straight line with regards to mathematical plots on graphs. Personally I use linear ramp - dual zone gave me a headache trying to track enemies that are moving in between speeds of the two zones. Linear ramp feels more natural to me and I feel that I have more control over the whole range of motion instead of a slow zone/fast zone, or the 'stepped' feeling of exponential ramp. IIRC my settings are 80/80 Horiz/vert sens, 100% aim assist, 20% - 30% aim assist window, 50% aim assist ease in (used to use 0 for a while for that super strong stick on target), 20% aim ease in (0% is too sensitive at small movements for me to use , used to be 30% at one time). I used to use lower sens but there were too many Genji's and Tracers, so I needed to increase it. At the end of the day, aim settings are personal to the individual - write down your settings on paper to remember your best ones, but don't be afraid to try new settings and adjust. Your settings are optimal to your preference and should work with you to help you perform the best you can, whether you use fast or slow, dual zone/expo/linear, or whatever else. :)
Hi! thanks for all the information. yes, aim ease in indirectly increases dead zone, about exponential ramp, I made a new 40 Second short video in channel you can check from yesterday, I did check and made an actual curve of how it works! I also play with Linear ramp for most characters for now! I'll give a try to your settings too, thanks.
@@DanielZH I also forgot to mention, I use kontrolfreek thumbstick extenders. I can't remember the exact product name but I have quite tall ones. It takes some time to get used to it but it helps me make small thumbstick adjustments at higher sensitivities, so there is that fact to consider too. If I did not use these I would likely use a lower sensitivity maybe 50 or 60
Glad it helps! you can also watch the first half of the video that is advanced settings, so you know what to change when you feel it's not working well and no longer need to check everywhere for settings!
You are a life saver. Im usually a decent R6 CoD and Apex player but in Overwatch I find it really hard to find a good setting for a controller. Thank you!
@@DanielZH Legacy Mode still on or off? Because I think Legacy Mode makes it sometimes too slow for me. In siege for example I play with a high sens and work with fine adjustments to the stick. With legacy mode I feel like I need pull the stick 3 times more than in R6 and Apex. Or is there any other option to play with really fine adjustments to the stick? 🤔 Edit: I think the Legacy Mode work really good for me at range to hit pharas and widows but close range like tracers or sombras its not the best. ( I played Soldier and Cassidy)
@@pavel7550 yes that's right, legacy mode Makes it immediate effect, while normal mode is ease in and out as shown in the video, still, Normal mode ia better overall, and if you feel stick is much, you can Lower aim assist strength
I feel like I must be stupid. I've been tweaking my aim settings for weeks now on every character I play. It never feels quite right. I watched your videos and I made my settings similar on linear ramp but starting out minimum 10% higher sensitivity. (I am more comfortable with high sensitivity but I can concede that I should probably not play as high as I was. ) thank you for the advice. Hopefully it works out for me. Keep making great content!
Hi! I'm glad videos helped you! I also released 2 videos for apex and cod players which gives you similar results to those games, you can check them from videos in the channel!
Dude thanks so much i was struggling with setting for just getting my aim to be Average your guide is super in depth and nice Recommendation for aiming for each hero helped me alot Especially for my setting on ashe only thing i keeped the same for each hero was aim ease in at 15 felt the most comfortable but tweaked everything else for hero i do play thanks :)
Glad I could help bro! There's also a new video for similar settings to Call of Duty, I recommend you try them too: ruclips.net/video/A7OIfZkr16M/видео.html
You are the maestro of "la casa de papel".you explained everything by always finding the answer to each question, also saying if it was slow / fast in what to touch or not. well done video with pure subtitles😉🤙
Thanks, actually with max Ease in 100% dead Zone increases to about 24% of whole stick! so something lower than 50 might be similar to default settings of other games. however, until 80 still works fine for me.
Appreciate the videos you're putting out! Why are your recommended settings in this video so different than the ones in your last video? For example the settings for exponential ramp? Previous video (exponential ramp): 28%, 16%, 100%, 100%, 50%, 80%, 5% This video (exponential all heroes): 24%, 19%, 95%, 100%, 45%, 0%, 0%
Hi, yes that's right, after I played for more days, I found these settings more comfortable! however, as I mentioned in the videos, settings are depended on you! change them whenever you feel something isn't right!
Guau. Eres la única persona que ha conseguido que entienda cada tipo de puntería y saber cuál es la que mejor se me adaptará mi juego, dual zone me encanta. Gracias de verdad. Sigue así. Veré tus vídeos para fortnite
I'm actually getting sick from my brother so I'm just updating to this recommended settings to see if it helps. Then it's bed time but I must say I played one game as hog and although I couldn't turn around quickly for any divers I had much more control mid range which made up for it. I'm super excited to climb. (When I'm feeling better). Damn bro gave me the flu.
Aim ease in is actually not a deadzone slider since it effects the whole curve, not just the lower end. So the higher end becomes slower as well. Lineair ramp on 37 is actually almost the same as expo ramp. Legacy mode means old aim assist settings, before aim assist ease in was implemented. Aim assist ease is at 0 gives you you instant aim assist when entering the aim assist window. 100 gives you full aim assist in the middle of the window. That is why it is called aim assist ease in. Aim assist window around 20 lines up with the actual character model, but you still need to decide what aim assist ease in you use with it. 0 aim assist window is actually still a small window with aim assist. Smoothing is delay before acceleration, and I would suggest 99 as a setting to experiment with since it's more responsive than a 100 which is just awful. The aim assist is very strong so lowering it by a a couple of points could be useful on heroes where you can't burst through the aim assist bubble because it feels like mud. At 20 aim assist strength is starts becoming unnoticeable, your character won't turn as much as on the higher settings. Thanks for making clear dual zone ramps up at 90%, always thought it was 80%.
Thanks for all the information you provided ! I'll consider them for the next parts and testing with main characters I play to see how it is. And yest, Aim smoothing 100% is a lot, even 99 feels much different
Hi, it depends on how you play, can't say a specific type is better, for example many people usually prefer Linear Ramp and exponential Ramp, because it's similar to other games, but some prefer dual zone even with default settings as they got used to it. You can try each method for 1 match and tweak then to see which feels better in your hands
Hey what would you say are some good settings for Bastion Dual Zone? I’m using the same you recommended for Torb because of the same aiming modes and styles of the two heroes, but is it good?
@@DanielZH Thank you a lot! I’ll try it when I enter the game later and btw your videos have been a huge help for me coming back into Overwatch, so thank you, really
Man at first I was all about linear, but I ended up going back to dual zone. My biggest issue is figuring out what smoothing I want. Any smoothing kind makes my aim delayed which makes sense but it really throws of my flicks and tracking. With no aim smoothing my aim for long range is amazing, but at close it can be to jumpy. So tough to figure out what works.
Hi, I understand you, for dualzone, it's better to keep smotthing less than 99 and not go so low because second zone can come in fast and ruin everything, however for linear and exponential until 40-30 feels natural. are you a long-range player? if yes, then dual zone and after that exponential ramp would work fine, with high aim assist like legacy mode.
@@DanielZH I play alot of Cassidy and Genji so I trying to find the right balance in universal settings for them. Like last night I put 70/70 sensitivity, smoothing to 0 with aim assist ease in at 80, ease in 0, and my aim with Cassidy went from 50 to 70 percent. Genji also felt better. It felt good but when I started playing reaper and had to shoot people up close, turning at point blank range felt to jittery.
My aim assist window is at 40, any higher and it really throws me of. I'm just going to have to find some kinda of middle ground with the smoothing. I think that is the key to get better aim.
Hey! First of all, this is a great video and nice that you go deep in this topic. Only thing im bit curious about is that how aim assist ease in works when aim assist legacy mode is selected ”on”? If im correct, in ow1 atleast, when ever the aim assist legacy mode is on the aim assist ease in dont affect the aim. Try it out
Your settings were amazing. However, I didnt see recommendations for Bastion?.. Could you provide them too. Also, are you planning providing recommendations to the new tank as well? I am new at xbox. Your tips really helped me. Thanks.
Hi! I'm glad it helped you; in that time, he was not available, so I wasn't sure how it works for him; however, I released 2 new videos for settings, which many people are saying this one is good for many, including Bastion: ruclips.net/user/shortswUjOMF4QlcI?feature=share give it a try and let me know what you think. + I got very low impressions and views on the newer videos so I thought better to wait for more update and release a new video, soon when the new character comes, I'll consider a new video. Full video: ruclips.net/video/A7OIfZkr16M/видео.html The second one: ruclips.net/video/fwaeAcXs0hs/видео.html
What about the scoped in sensitivity for like Ashe, Widowmaker and Ana??? Loved the video and will try these settings out but I don't think it was mentioned on the video for those heroes🤔
Hi, Sensitivity settings overall are very, you have to adjust them yourself, the important part is trying advanced settings with your liking sensitivity and see if you like it
@@DanielZH Ah I understand, thank you either, will try all of these to see what works best for me, any recomendations from your personl experience for scoped in sensitivity??? if you don't mind me asking
@@diegoisaacrubio9578 Sure, I usually play very long range with scope, my scop sensitive is 60 Horizontal and 50 Vertical with Dualzone method, 98% Aim smoothing, 0 ease in. However since 2 days ago I started playing with Kiriko all the time so I can find best settings for her!
Hey man really well explained video. Appreciate the effort and help. Can you do one for Bastian? Im not sure if I'm just blind and cant see it or you did not male one for him
@@DanielZH i'll do, thanks for your guide, incredible work, really detailled! continue to work with this kind of Deep, and i'm sure your Channel Will increase fast. Sorry for my basic english, thank you again for your work💪🏽
Amazing videos, just finished watching both on OW2. But I'm kinda confused why the recommended Duel Zone All Heros the sensitivity is 64H and 59L but in the individual Heros everyone's is much lower?
Hi, thanks, The sensitivity settings are not conditionered and they're untouched, as everyone should use what seems to be good for them! BTW there's a new video similar Aim settings to COD MW2 and it seems many liked it! Check it and see if you find it useful: ruclips.net/video/A7OIfZkr16M/видео.html And a new video coming soon similar settings to Apex legends game! I found it better than any other
Hello Danial. I have a question for you. I have been playing on the Xbox Series x and just recently got a PS5 after not having owned a PS since the PS2. I started to play OW2 on the PS5 with my friend who also just got PS4. We both set our aim settings to what we had on our Series X/S's and for some reason it feels like we can't turn the camera as good as we can when we play on Xbox. Are the Playstation controllers special in some way?
Hi! The Aim Assist system works differently on PlayStation compared to Xbox (though Analog sticks are similar in terms of behavior) If you haven't watch Aim techniques, I recommend you check it from here so you can change some settings to get similar results: ruclips.net/video/l2pKZxH5LVc/видео.html
Hi Danial, why is it that the recommended sensitivity for the dual zone all heroes is around 50/60 whilst in the per heroe section you are almost always around 20/30 mark?
Are you able to give us your Bastion settings? (I assume he was disabled from the game when you made this) And will you give us settings for the new characters going forward?
I made a new video with settings that I'm currently using for him and many other Heroes: ruclips.net/video/A7OIfZkr16M/видео.html And yes, as more as I play, I make new videos, but the current one I mentioned above works really nice with AR and Tank.
Hey! Really nice & detailed guide. How would your settings for a dual zone user change for really close range? I.e. DVA range In the video you mention decreasing the Aim assist strength however with your DVA settings the aim strength is unchanged - I'm aware that these are your personal settings. I've seen some comments already mentioned that some people have a lot of difficult with the aim being too jump at close range when the enemy is moving.
Hi thanks, yes Aim Assist is a bit much in this game, However I'm always refining the settings, if I'm gonna Play DVA now, I would use these settings as they're very good for DVA: ruclips.net/video/A7OIfZkr16M/видео.html these settings are similar to Call of Duty game, but they work very good for AR and Tank, still, you can adjust each one that feels not good.
This is a very good video to understand how the aim assist system works! But can you explain why you put such small values of vertical and horizontal? On particularly fast heroes like Genji, I have 100 horizontally, and this is not always enough for sharp turns
Hi, thanks, I think I forgot to mention these sensitivity settings arent' the ones I'm using, they're just left so people can use any sens they like, the main settings I tried to do were others rather than sensitivity as that's personal. For example, I'm recently using Edge with High Curve at start and Higher sense with Dualzone and eliminated the second part which is way too fast normally and it's giving me a very good results for characters like soldier.
I don't understand, you wanna have high sensitivity? Just increase it then, in that case, lower aim smoothing will be also better (not in dual zone btw)
@@MrHnnoo Maybe that's a bug! however, for me it works well, can you try changing DNS on console as I guess it may save on network and there might be network issues?
It's good now after the update thx for helping but I am still struggling with aims, especially on widowmaker some time I feel am good but the game after a can't aim 😢
@@DanielZH It has none, the option is completely blank. Lol. Everything from Aim Assist Strength thru Aim Assist Ease In are gone from PC version. Preferred Mode is also not on PC version either. You get option on what to make your max and min framerate instead.
Notice in your controls under aim technique theres a dual sense trigger feedback. I'm on ps5 but dont have this option and I didnt see any option to download a "ps5" version.
@@codeninja1 oh you mean that you downloaded PS4 version? That's why... On game page go to 3 dots, and then select the option: select version, there you can find it
@@DanielZH when I go there my only options are ow2 ps4 and ow: beta. If I search for it it brings up the ps5 free version and when I click on it it brings me to the same version I have. Update Had to use the phone app. Search for it there, add to library then remote download. What a hassle.
Yeap very helpful video and after all thise explanation my conclusion is that thise game needs to be played with keyboard and mouse… it’s so frustrating all thise aim assist settings and also different settings for each player… it’s like u need to hack ur controller to play thise game
Hi, it was an early video btw, I released settings that simulate other games in this shorts playlist which worked very well for many: ruclips.net/p/PLfzrQ3H5ECSbhZrUzCis_n-8me8kPELeC
damn these are really slow, idk how you use them. you turn way too slow, especially for characters like tracer, you need to be able to turn around after blinking behind enemies. i use 85 on linear
Hi, yes I mentioned sensitivity settings are different for everyone, so you can choose what's the best for you. I personally play with low sensitivity and I'm fine with it! The important part is if advanced settings qork fine for you? Or what advanced settings you use, tell us so we can try it too
Why your racomanded dual zone settings for ALL HERO have like 60 an 50 horizontal and vertical sensitivity but your actual dual zone settings hero by hero are always around 25 for both horizontal and vertical? Hahahahah I am confused
Hi, as mentioned in the video, Sensitivity settings are personal; those aren't recommendations;, and Speed you like! I myself play with sens around 60 depending on heroes.
آقا با توجه وضعیت نت ایران و مشکل سرورهای کالاف دیوتی مدرن وارفر ۲ که تازه منتشر شده یه پروکسی یا دی ان اس معرفی کن بتونیم کالاف بزنیم خدایی وسط اینهمه مشکل و گرونی پول کالاف دادیم اینم به سرور وصل نمیشه اخه چقدر بدبختی داریم ما
My new settings after season 4: ruclips.net/video/K8ZaY-L_btE/видео.html
These settings Are NOT THE BEST for everyone, they are just recommended, what the first half of the video to learn how you can make best settings yourself.
Overwatch 2 tutorials: ruclips.net/p/PLfzrQ3H5ECSatfRENts2PnMUWDwdQEAG5
Buy me a coffee:
ruclips.net/channel/UCzoK1582e2w41kUG0MnUOzwjoin
Join Our Discord Server: (English only)
discord.com/invite/ykkWZGrV29
Telegram Channel: t.me/Danielzh1
Great, great guide! I obsess about my settings and have been frustrated that the game doesn't explain what each setting does, so this guide was really helpful. Ok some characters it improved my performance, for example Widowmaker. A few of them I can't use (for example I need to be able to turn around 180 degrees on Tracer and Genji).
Thanks Jesper! I'm glad it helped, also I recommend keeping Aim Assist strength at 99 and lower most of the time, using 100 make it sticks so hard and ruins your aim
Wow!
What an amazing guide. The editing put into this is really well done. Thanks so much!!
Glad you enjoyed it!
Nice video! I like your explanation and reasons for the aim setting - its always nice to hear different perspectives on the topic as I've been adjusting the settings for years!
Aim ease in is not a deadzone slider, however it gives that illusion by making small movements less sensitive. As David mentioned here in the comments, aim ease in changes the steepness of the aim curve. Aim ease in at 0 on linear ramp should be a perfectly straight line from 0% to 100% move speed with 0% to 100% stick movement. Increasing the aim ease in changes the shape of the aim from a straight line to a curve, so the more you increase the aim ease in the more that linear ramp behaves like exponential ramp. I would even go as far to say that 100% aim ease in on linear ramp is exaggerated enough to feel like dual zone, where you can't really move the crosshair for much of the joystick range of motion, and then suddenly the speed ramps up as you near full stick deflection. You said you were not sure what the word exponential meant in one of your last videos; I'd suggest looking at maths to visualise and see the difference between an exponential function and a linear function but a simple TLDR; exponential is a curve and linear is a straight line with regards to mathematical plots on graphs.
Personally I use linear ramp - dual zone gave me a headache trying to track enemies that are moving in between speeds of the two zones. Linear ramp feels more natural to me and I feel that I have more control over the whole range of motion instead of a slow zone/fast zone, or the 'stepped' feeling of exponential ramp.
IIRC my settings are 80/80 Horiz/vert sens, 100% aim assist, 20% - 30% aim assist window, 50% aim assist ease in (used to use 0 for a while for that super strong stick on target), 20% aim ease in (0% is too sensitive at small movements for me to use , used to be 30% at one time). I used to use lower sens but there were too many Genji's and Tracers, so I needed to increase it. At the end of the day, aim settings are personal to the individual - write down your settings on paper to remember your best ones, but don't be afraid to try new settings and adjust. Your settings are optimal to your preference and should work with you to help you perform the best you can, whether you use fast or slow, dual zone/expo/linear, or whatever else. :)
Hi! thanks for all the information.
yes, aim ease in indirectly increases dead zone, about exponential ramp, I made a new 40 Second short video in channel you can check from yesterday, I did check and made an actual curve of how it works!
I also play with Linear ramp for most characters for now! I'll give a try to your settings too, thanks.
@@DanielZH I also forgot to mention, I use kontrolfreek thumbstick extenders. I can't remember the exact product name but I have quite tall ones. It takes some time to get used to it but it helps me make small thumbstick adjustments at higher sensitivities, so there is that fact to consider too. If I did not use these I would likely use a lower sensitivity maybe 50 or 60
@@ianmackenzie6156 Ikr, higher thumb Sticks help to have more control over higher sensitivity! I'm counting on Dualsense edge
@@Drakals currently plat in all roles. Peaked diamond tank and support in OW1 if that's of any use
What do you have for aim smoothing? And do you consider changes in regards to long vs close heroes, hit scan Vs projectile?
Thank you man that saves a lot of time finding on my own .
Glad it helps! you can also watch the first half of the video that is advanced settings, so you know what to change when you feel it's not working well and no longer need to check everywhere for settings!
Yea thank you hope to see some more new content from you 😊
@@arunacrytek5761 Sure! thanks. 🙂
You are a life saver.
Im usually a decent R6 CoD and Apex player but in Overwatch I find it really hard to find a good setting for a controller.
Thank you!
Thanks, I'm glad it helped 😊.
BTW, linear mode with aim smoothing around 30-40 and ease in around 30 is recommended also!
@@DanielZH Legacy Mode still on or off? Because I think Legacy Mode makes it sometimes too slow for me. In siege for example I play with a high sens and work with fine adjustments to the stick. With legacy mode I feel like I need pull the stick 3 times more than in R6 and Apex. Or is there any other option to play with really fine adjustments to the stick? 🤔
Edit: I think the Legacy Mode work really good for me at range to hit pharas and widows but close range like tracers or sombras its not the best. ( I played Soldier and Cassidy)
@@pavel7550 yes that's right, legacy mode Makes it immediate effect, while normal mode is ease in and out as shown in the video, still, Normal mode ia better overall, and if you feel stick is much, you can Lower aim assist strength
Your exponential recommendation was perfect for me. I've messed around for days but I keep going back to it.
Glad it was helpful 🙂
That was an amazing break down with beautiful graphics! You earned yourself a subscriber
Much appreciated JUD!
I feel like I must be stupid. I've been tweaking my aim settings for weeks now on every character I play. It never feels quite right. I watched your videos and I made my settings similar on linear ramp but starting out minimum 10% higher sensitivity. (I am more comfortable with high sensitivity but I can concede that I should probably not play as high as I was. ) thank you for the advice. Hopefully it works out for me. Keep making great content!
Hi! I'm glad videos helped you! I also released 2 videos for apex and cod players which gives you similar results to those games, you can check them from videos in the channel!
You discovered the mystery of ow settings! TYSM! Amazing job!
Thanks a bunch! Glad I could help!
Dude thanks so much i was struggling with setting for just getting my aim to be Average your guide is super in depth and nice Recommendation for aiming for each hero helped me alot Especially for my setting on ashe only thing i keeped the same for each hero was aim ease in at 15 felt the most comfortable but tweaked everything else for hero i do play thanks :)
Glad I could help bro! There's also a new video for similar settings to Call of Duty, I recommend you try them too: ruclips.net/video/A7OIfZkr16M/видео.html
Wow, so detailed and clear explained! Helped me a lot to find my old settings from overwatch 1 years ago. Thank you! 🙏
Thank you so much for your kind words! I'm glad it helped you
Great video, thank you. I'll definitely will try these settings on my favorite hero
Glad you liked it! Feel free to adjust and change all parts now that you know how they work!
I’ve never had someone give such good recommendations for settings. These are amazing
So glad to hear that! thanks.
Amazing video!!!! Thank you for doing such an in depth guide on the controller settings!!!
Glad it was helpful! 😄
You are the maestro of "la casa de papel".you explained everything by always finding the answer to each question, also saying if it was slow / fast in what to touch or not. well done video with pure subtitles😉🤙
So nice of you, haha thanks. 😃
Wow what a detailed video👏 You outdid your self! Even though i don't play OW
Thanks a bunch, Mohamad! 😃
amazing job bro! keep putting on the effort!
Appreciate it! thanks.
Best review that I’ve seen, it actually goes into detail thank you
Glad you like it, the game got updated and soon I release a new video for it
@@DanielZH yeah, I’m also glad they added dead zones for both the left and right joysticks on controller, it makes a huge difference
This video really helped me I am dropping 20 to 30 kills per game
Glad it helped you, bro 🙂
For the linear settings to match cod/apex what deadzone in cod would it be similar to? Btw great video so straightforward and easy to understand.
Thanks, actually with max Ease in 100% dead Zone increases to about 24% of whole stick! so something lower than 50 might be similar to default settings of other games. however, until 80 still works fine for me.
@@DanielZH so what you’re saying is that max aim ease in equals 24 % deadzone but what about 0 aim ease in? You said to use 15 %aim ease in but why
This video was amazing !! Thank you for the help
Glad you liked it!
Amazing video, is there a way to make overwatch feel like 4-3 linear from apex?
Great video mate, super helpful especially with the timestamps
Glad to help 😊
Appreciate the videos you're putting out! Why are your recommended settings in this video so different than the ones in your last video? For example the settings for exponential ramp?
Previous video (exponential ramp): 28%, 16%, 100%, 100%, 50%, 80%, 5%
This video (exponential all heroes): 24%, 19%, 95%, 100%, 45%, 0%, 0%
Hi, yes that's right, after I played for more days, I found these settings more comfortable! however, as I mentioned in the videos, settings are depended on you! change them whenever you feel something isn't right!
Wow great work with all the hero settings must’ve taken a long time to tune these I copy and pasted all exponential settings for each hero👍
Glad it helped! You can also check recommended Season 2 Exponential Ramp settings here: ruclips.net/video/7pHitMGMSdY/видео.html
Bro tysm these settings helped so much
Happy to help
For folks who have controller drift lol play on expo ramp or just up your aim ease to 50+
Yes nice.
Guau. Eres la única persona que ha conseguido que entienda cada tipo de puntería y saber cuál es la que mejor se me adaptará mi juego, dual zone me encanta. Gracias de verdad. Sigue así. Veré tus vídeos para fortnite
Thanks! Yes I'm recently using DualZone with some Custom Edge curves and it goes great!
@@DanielZH I'm going to try the exponential. since you always defended that option. If I don't like it, I leave it on dual
THANK YOU BRO UR AWESOME
You're awesome 😎, thanks.
GREAT WORK BROTHER
Thanks a lot babajun 😁
I'm actually getting sick from my brother so I'm just updating to this recommended settings to see if it helps. Then it's bed time but I must say I played one game as hog and although I couldn't turn around quickly for any divers I had much more control mid range which made up for it. I'm super excited to climb. (When I'm feeling better). Damn bro gave me the flu.
Hi, Sensitivity settings are personal use what feels controllable for you, and here are my new settings: ruclips.net/video/K8ZaY-L_btE/видео.html
Aim ease in is actually not a deadzone slider since it effects the whole curve, not just the lower end. So the higher end becomes slower as well.
Lineair ramp on 37 is actually almost the same as expo ramp.
Legacy mode means old aim assist settings, before aim assist ease in was implemented.
Aim assist ease is at 0 gives you you instant aim assist when entering the aim assist window. 100 gives you full aim assist in the middle of the window. That is why it is called aim assist ease in.
Aim assist window around 20 lines up with the actual character model, but you still need to decide what aim assist ease in you use with it.
0 aim assist window is actually still a small window with aim assist.
Smoothing is delay before acceleration, and I would suggest 99 as a setting to experiment with since it's more responsive than a 100 which is just awful.
The aim assist is very strong so lowering it by a a couple of points could be useful on heroes where you can't burst through the aim assist bubble because it feels like mud.
At 20 aim assist strength is starts becoming unnoticeable, your character won't turn as much as on the higher settings.
Thanks for making clear dual zone ramps up at 90%, always thought it was 80%.
Thanks for all the information you provided ! I'll consider them for the next parts and testing with main characters I play to see how it is.
And yest, Aim smoothing 100% is a lot, even 99 feels much different
I have a question are there specific aim types that are better for some heroes more than others?
Like linear, dual zone etc.
Hi, it depends on how you play, can't say a specific type is better, for example many people usually prefer Linear Ramp and exponential Ramp, because it's similar to other games, but some prefer dual zone even with default settings as they got used to it.
You can try each method for 1 match and tweak then to see which feels better in your hands
for linear ramp with ashe and widowmaker, what settings would you recommend for the scoped aim sensitivity?
Hi, if you play from far, I personally prefer 18 - 15 for scope, if you play close range, well, you have to go higher.
Love videos like this 💪🏽
So glad! 🙂
Nice video dude, i love how u say the name of all hero 😅
Thanks 😅, it would take a lot of time, so I copy pasted that part
Hey what would you say are some good settings for Bastion Dual Zone? I’m using the same you recommended for Torb because of the same aiming modes and styles of the two heroes, but is it good?
Hi, I would suggest you trying these new settings for most of characters: ruclips.net/video/A7OIfZkr16M/видео.html
@@DanielZH Thank you a lot! I’ll try it when I enter the game later and btw your videos have been a huge help for me coming back into Overwatch, so thank you, really
@@BunsBunBuns you're so welcome. Glad to help :)
I feel that Overwatch is more difficult than other games to shoot
Hi! Actually default settings yes, + depends on character, play with tank or assault, they're easier to control! For me at least.
WOW, very good video man👍
Thank you! 👍
Man at first I was all about linear, but I ended up going back to dual zone. My biggest issue is figuring out what smoothing I want. Any smoothing kind makes my aim delayed which makes sense but it really throws of my flicks and tracking. With no aim smoothing my aim for long range is amazing, but at close it can be to jumpy. So tough to figure out what works.
Hi, I understand you, for dualzone, it's better to keep smotthing less than 99 and not go so low because second zone can come in fast and ruin everything, however for linear and exponential until 40-30 feels natural. are you a long-range player? if yes, then dual zone and after that exponential ramp would work fine, with high aim assist like legacy mode.
@@DanielZH I play alot of Cassidy and Genji so I trying to find the right balance in universal settings for them. Like last night I put 70/70 sensitivity, smoothing to 0 with aim assist ease in at 80, ease in 0, and my aim with Cassidy went from 50 to 70 percent. Genji also felt better. It felt good but when I started playing reaper and had to shoot people up close, turning at point blank range felt to jittery.
My aim assist window is at 40, any higher and it really throws me of. I'm just going to have to find some kinda of middle ground with the smoothing. I think that is the key to get better aim.
@@theelusivememe1772 I know right! If you play with such high aim speed, then using smoothing around 20-30 could be a good spot!
@@DanielZH i will try it out later tonight and see how it goes, thx.
Hey!
First of all, this is a great video and nice that you go deep in this topic.
Only thing im bit curious about is that how aim assist ease in works when aim assist legacy mode is selected ”on”?
If im correct, in ow1 atleast, when ever the aim assist legacy mode is on the aim assist ease in dont affect the aim.
Try it out
Hi! Thanks for the question, yes it does not affect legacy mode! even high amounts didn't feel to work at all, I should've mention that! thanks.
Thank you man I hope you get paid for this somehow definitely helped me out
Thanks bro, glad it helped.
you can become a member in channel if you would like to support haha: ruclips.net/channel/UCzoK1582e2w41kUG0MnUOzwjoin
Your settings were amazing. However, I didnt see recommendations for Bastion?.. Could you provide them too. Also, are you planning providing recommendations to the new tank as well? I am new at xbox. Your tips really helped me. Thanks.
Hi! I'm glad it helped you; in that time, he was not available, so I wasn't sure how it works for him; however, I released 2 new videos for settings, which many people are saying this one is good for many, including Bastion: ruclips.net/user/shortswUjOMF4QlcI?feature=share
give it a try and let me know what you think. + I got very low impressions and views on the newer videos so I thought better to wait for more update and release a new video, soon when the new character comes, I'll consider a new video.
Full video:
ruclips.net/video/A7OIfZkr16M/видео.html
The second one: ruclips.net/video/fwaeAcXs0hs/видео.html
These really worked for me. Great when playing alone.
Too bad playing with my brother in the PC pool makes it all unusable. :(
Hi, yes when you join a PC Lobby, it removes aim assist and making it much harder to play.
You are great man, thank you, thank you, ❤
I appreciate you bro 🙏❤️
What about the scoped in sensitivity for like Ashe, Widowmaker and Ana??? Loved the video and will try these settings out but I don't think it was mentioned on the video for those heroes🤔
Hi, Sensitivity settings overall are very, you have to adjust them yourself, the important part is trying advanced settings with your liking sensitivity and see if you like it
@@DanielZH Ah I understand, thank you either, will try all of these to see what works best for me, any recomendations from your personl experience for scoped in sensitivity??? if you don't mind me asking
@@diegoisaacrubio9578 Sure, I usually play very long range with scope, my scop sensitive is 60 Horizontal and 50 Vertical with Dualzone method, 98% Aim smoothing, 0 ease in.
However since 2 days ago I started playing with Kiriko all the time so I can find best settings for her!
@@DanielZH I see, will try them to see how well I do, thank you again!!!
@@diegoisaacrubio9578 Great! Let me know what settings you will use when you find a good settings for yourself!
Hey man really well explained video. Appreciate the effort and help. Can you do one for Bastian? Im not sure if I'm just blind and cant see it or you did not male one for him
Hi! glad it helped, he wasn't available that time because of bug, I'll share my thoughts on him once I get to play with him here in the comments.
i'll test, i player ow from 2016 to pc, now i started to play on console for fun, i prefer linear ramp sound likes mouse sense
Great, yes linear ramp has similar effect to mouse, and for more similar effect, try aim smoothing even on 0!
@@DanielZH i'll do, thanks for your guide, incredible work, really detailled! continue to work with this kind of Deep, and i'm sure your Channel Will increase fast.
Sorry for my basic english, thank you again for your work💪🏽
Thank you so much for your support, Sure I'll do, and your English is good 😊👍
The same I moved on from pc to controller and I feel lost I need to train every champs
@@zikarone345 Try exponential Ramp with 0 ease in and 12 aim smoothing
Amazing videos, just finished watching both on OW2. But I'm kinda confused why the recommended Duel Zone All Heros the sensitivity is 64H and 59L but in the individual Heros everyone's is much lower?
Hi, thanks, The sensitivity settings are not conditionered and they're untouched, as everyone should use what seems to be good for them! BTW there's a new video similar Aim settings to COD MW2 and it seems many liked it!
Check it and see if you find it useful:
ruclips.net/video/A7OIfZkr16M/видео.html
And a new video coming soon similar settings to Apex legends game! I found it better than any other
Insta sub. Thank you for this video.
Thanks for the sub!
Hello Danial. I have a question for you. I have been playing on the Xbox Series x and just recently got a PS5 after not having owned a PS since the PS2. I started to play OW2 on the PS5 with my friend who also just got PS4. We both set our aim settings to what we had on our Series X/S's and for some reason it feels like we can't turn the camera as good as we can when we play on Xbox. Are the Playstation controllers special in some way?
Hi! The Aim Assist system works differently on PlayStation compared to Xbox (though Analog sticks are similar in terms of behavior)
If you haven't watch Aim techniques, I recommend you check it from here so you can change some settings to get similar results: ruclips.net/video/l2pKZxH5LVc/видео.html
Nice job, Daniel. Bastion settings?
Thanks! I think I wasn't able to choose him in game for some reason. can you play with him?
@@DanielZH bastion is out of game due to bug
@@Hsarac-nw3iv thanks for the info
What about bastion? Im s bastion main and I can't keep the same settings u was wondering what you would suggest?
Hi, here are new settings for each hero + Bastion: ruclips.net/video/K8ZaY-L_btE/видео.html
Hey could you do best settings for bastion and I love the videos❤
Hey thanks! sure, soon I release a new video for Call of Duty similar settings, and I will include him in that one!
@@DanielZH thanks
Thanks man
One question i have a problem with my hdr my brightness is so high how i can fix
Hi thanks, on which console and TV are you playing?
@@DanielZH ps5 and tv Samsung
@@Antonio-y2i7u Have you setup PS5 and Game HDR Correctly?
Hi Danial, why is it that the recommended sensitivity for the dual zone all heroes is around 50/60 whilst in the per heroe section you are almost always around 20/30 mark?
Hi! I actually didn't change Sensitivity, and they're random! I believe that's a personal choice and better to set it up to any number you like!
Are you able to give us your Bastion settings? (I assume he was disabled from the game when you made this)
And will you give us settings for the new characters going forward?
I made a new video with settings that I'm currently using for him and many other Heroes: ruclips.net/video/A7OIfZkr16M/видео.html
And yes, as more as I play, I make new videos, but the current one I mentioned above works really nice with AR and Tank.
Hey! Really nice & detailed guide. How would your settings for a dual zone user change for really close range? I.e. DVA range
In the video you mention decreasing the Aim assist strength however with your DVA settings the aim strength is unchanged - I'm aware that these are your personal settings.
I've seen some comments already mentioned that some people have a lot of difficult with the aim being too jump at close range when the enemy is moving.
Hi thanks, yes Aim Assist is a bit much in this game, However I'm always refining the settings, if I'm gonna Play DVA now, I would use these settings as they're very good for DVA: ruclips.net/video/A7OIfZkr16M/видео.html
these settings are similar to Call of Duty game, but they work very good for AR and Tank, still, you can adjust each one that feels not good.
very nice video
Thanks Kelvin!
This is a very good video to understand how the aim assist system works! But can you explain why you put such small values of vertical and horizontal? On particularly fast heroes like Genji, I have 100 horizontally, and this is not always enough for sharp turns
Hi, thanks, I think I forgot to mention these sensitivity settings arent' the ones I'm using, they're just left so people can use any sens they like, the main settings I tried to do were others rather than sensitivity as that's personal.
For example, I'm recently using Edge with High Curve at start and Higher sense with Dualzone and eliminated the second part which is way too fast normally and it's giving me a very good results for characters like soldier.
Do you also do Ramattra Setting's?
Join discord server with the link in description and I'll send you there.
Everyone is good now i can’t have fun
Hmmm, I haven't played recently, but season 2 got a bit harder since more players joined! though I play with Kiriko mostly and I'm ok with that haha.
What r the settings for the fastest sens ?
I don't understand, you wanna have high sensitivity? Just increase it then, in that case, lower aim smoothing will be also better (not in dual zone btw)
Thanks
That’s at first but you forgot about Bastion
Hi, he was removed due to bug in that time, here's a new video that works nice for him and others: ruclips.net/video/A7OIfZkr16M/видео.html
How can I do these sitting for each one cuz when I do it keeps returning to the the all character sitting
Hi, even after you change character by R3? in which platform you play?
@@DanielZH yes, ps5
@@MrHnnoo Maybe that's a bug! however, for me it works well, can you try changing DNS on console as I guess it may save on network and there might be network issues?
It's good now after the update thx for helping but I am still struggling with aims, especially on widowmaker some time I feel am good but the game after a can't aim 😢
@@MrHnnoo Hi! glad it fixed, for widow maker, I recommend you trying this: ruclips.net/user/shortswUjOMF4QlcI?feature=share
Remember if playing PC theres no Aim Assist
Yes, even if you're on console and on a PC lobby, no Aim Assist
@@DanielZH Anyway you can eventually do a video for people who play controller on PC? Im having a tough time finding what I like as sensitivity goes.
@@Candyman5OS Yes sure, however I'm not sure if PC has 0 Aim Assist or it has a little, so tonight, I download the game on PC to see how it works!
@@DanielZH It has none, the option is completely blank. Lol. Everything from Aim Assist Strength thru Aim Assist Ease In are gone from PC version.
Preferred Mode is also not on PC version either. You get option on what to make your max and min framerate instead.
@@Candyman5OS yeah frame rate can go even higher on PC I guess, but not having Aim assist option doesn't mean 0! I have to check ✔️
Why do the reinhardt settings make it too slow
Hi, sensitivity settings aren't considered, set those to what you like. for Rein I go above 60
What can I do if my game does not have the settings for aim assist widow size, aim assist legacy mode etc?
computer game
Hi, these settings are for console, on PC, you don't have any aim assist.
Notice in your controls under aim technique theres a dual sense trigger feedback. I'm on ps5 but dont have this option and I didnt see any option to download a "ps5" version.
Hi, yes that's for L2 R2 triggers! You don't have that?
If you have PS5 version, too weird!
@@DanielZH I dont see anywhere to download the ps5 version. I've done so with other games so I know where to look.
@@codeninja1 oh you mean that you downloaded PS4 version? That's why...
On game page go to 3 dots, and then select the option: select version, there you can find it
@@DanielZH when I go there my only options are ow2 ps4 and ow: beta. If I search for it it brings up the ps5 free version and when I click on it it brings me to the same version I have.
Update
Had to use the phone app. Search for it there, add to library then remote download. What a hassle.
@@codeninja1 Oh, glad you found a way to fix it, I downloaded from phone since beginning and it was fine!
I didn't see one for bastion. Why?
Hi, he wasn't in the game that time, here's an update for him: ruclips.net/video/fwaeAcXs0hs/видео.html
Aim assist strength on 100%
Yeap very helpful video and after all thise explanation my conclusion is that thise game needs to be played with keyboard and mouse… it’s so frustrating all thise aim assist settings and also different settings for each player… it’s like u need to hack ur controller to play thise game
Hi, it was an early video btw, I released settings that simulate other games in this shorts playlist which worked very well for many: ruclips.net/p/PLfzrQ3H5ECSbhZrUzCis_n-8me8kPELeC
Thx bro for the help but I got to ask who the f is De ve A 🤣🤣🤣🤣🤣
I don't know how to pronounce her name 😄
Bro i was struggling with ov 2 and hated it due to aim . You made me love it again thank you
@@bouncer9404 I'm so glad it helped you bro! I think linear Ramp would be the best choice for many!
Bastion settings?
He was out for the update; I recommend this for him: ruclips.net/user/shortswUjOMF4QlcI?feature=share
damn these are really slow, idk how you use them. you turn way too slow, especially for characters like tracer, you need to be able to turn around after blinking behind enemies. i use 85 on linear
Hi, yes I mentioned sensitivity settings are different for everyone, so you can choose what's the best for you.
I personally play with low sensitivity and I'm fine with it!
The important part is if advanced settings qork fine for you?
Or what advanced settings you use, tell us so we can try it too
@@DanielZH fair enough, you just might have a bit of trouble if ur getting flanked a lot. I use 88/42 x/y, 36. aim smoothing and 26 aim ease in. :)
@@billaniii thanks for the info, I'll try it and see if it works for me :)
@@DanielZH itll probably feel way too fast for you because your so used to low settings
@@billaniii Yes xD
Man forgot about bastion
He was unavailable that time due to bug, next video I make for Overwatch will include him as well.
@@DanielZH ty
I can t see bastion in the setup 😓
He was bugged out, here's a video for him: ruclips.net/video/7pHitMGMSdY/видео.html
Why your racomanded dual zone settings for ALL HERO have like 60 an 50 horizontal and vertical sensitivity but your actual dual zone settings hero by hero are always around 25 for both horizontal and vertical? Hahahahah
I am confused
Hi, as mentioned in the video, Sensitivity settings are personal; those aren't recommendations;, and Speed you like! I myself play with sens around 60 depending on heroes.
آقا با توجه وضعیت نت ایران و مشکل سرورهای کالاف دیوتی مدرن وارفر ۲ که تازه منتشر شده یه پروکسی یا دی ان اس معرفی کن بتونیم کالاف بزنیم خدایی وسط اینهمه مشکل و گرونی پول کالاف دادیم اینم به سرور وصل نمیشه اخه چقدر بدبختی داریم ما
سلام تنها راهش شیر کردن وی پی ان از کامپیوتر هست. روشش هم اینجاست:
ruclips.net/p/PLfzrQ3H5ECSYiU3lS_AZVwye61LHOJZmC
I can't see bastion
He wasn't in game that time, here's a new video for him: ruclips.net/video/7pHitMGMSdY/видео.html
I can’t see half the settings I can’t even tell what your changing since you block half screen
In which part exactly?
@@DanielZH when your showing each hero’s setting
@@huntergreen22888 Oh I see, consider from top to bottom, it's the same on PS5, btw this is the new settings: ruclips.net/video/K8ZaY-L_btE/видео.html
@@DanielZH thanks
@@huntergreen22888 Oh I see, these are for controller though.
I’ll take hanzo for 500
Hanzo is a little tricky to play
Iran
Bale, Iran
@@DanielZH please make a video for Persian language we need this
@@mohamadmahdavi7677 You can use subtitles!