13hp Backwater Mud Motor Load Test 1436 Jon Boat
HTML-код
- Опубликовано: 5 сен 2024
- Carrying a heavier load than normal for me on this 1436 jon boat. This is also the second time I'm taking out the Backwater Swomp Lite Glider Kit 12-16 HP.
I was wanting to try the props that Jake at Backwater sent over but with the load that was on the boat, both 9" props were too big.
The main difference was the big cooler adding 110 to 120 pounds. The cooler weighs 32 lbs and it was half full of ice and water (80 lbs)
I will do an empty boat test and go play in the grass another day to see what this kit can do. For now, it handles pretty well. I still get a lot of vibration in the handle, but it keeps its speed with the added load of 110 pounds while running the 8x4 prop. The 9x5 prop was too much and I didn't get to test the 9x4.
BOAT SETUP:
1436 lt Alumacraft Jon Boat (would not recommend - go get a tracker or something else other than an Alumacraft) {135lbs}
Custom front deck and floor {~75lbs}
Battery, trolling motor, fishing supplies, cooler, anchor, etc... = {~100lbs}
My weight = 150lbs
75qt Vibe Element Cooler - {32lbs}
Contents of cooler (half full of ice/water) - {80lbs}
ENGINE SETUP:
13hp Predator Engine by Harbor Freight (serial/model number 60349 [hemi-version]) {76lbs}
Backwater Swomp Lite Glider Kit 12-16 hp {55lbs}
Total weight = 700 pounds
Visit the JTgatoring store on Amazon for product lists & ideas for your next outing - www.amazon.com...
If you'd like to make my day and help support JTgatoring here's a few things you could do that are organized from easiest to most helpful.
1. Like this video
2. Comment your opinion, experience, and/or feedback
3. Subscribe to the JTgatoring RUclips channel
4. Share this video with a friend or on social
5. Follow other social media pages - Facebook, Instagram, and Snapchat
6. Links & codes below provide funding without making you spend extra money to support JTgatoring while doing your normal shopping. Click on the links below before doing your shopping to help support JTgatoring:
Bass Pro Shops - www.jtgatoring...
Cabela's - www.jtgatoring...
Overton’s (similar to Bass Pro Shops but more focused on boating) - www.jtgatoring...
Walmart - www.jtgatoring...
Nord VPN for a secure internet connection - www.jtgatoring...
Victorinox Knives for Kitchen or Outdoor use - www.jtgatoring...
Anker Power/Battery Banks (phone, laptop, small device charging) - www.jtgatoring...
Sperry (my fav. brand of flip flops) - www.jtgatoring...
Rapala 10% Off Code: FISH10 - www.jtgatoring...
Batteries Plus - www.jtgatoring...
Tackle Direct - www.jtgatoring...
I know a lot of guys want to do tests with the boat as empty and lite as possible. But honestly these fully loaded test videos are much more valuable. The empty videos are useless, unless and guy is boat racing. Who isn't going to have a boat full of gear, ice and beverages. Thanks for the video.
Thanks Wade! It does make a noticeable difference when you go from an empty boat to a fully loaded hull ready for a good time. Thanks for taking the time to leave a comment with your feedback, I really appreciate it
Lots of good ideas and real world insight for people with Jon boats👍👍
Thank you FLORIDA JACK! I try to put my ideas out there so others can take them if they want.
That swamp runner is hard to beat , they preform very well on the smaller motors. I would think they would do just as good on larger motor as well. My 2 .
Thats what I'm starting to figure out. I think this backwater kit would be better on a vtwin engine, but for a single cylinder engine, the swamp runner is the go to. I'd like to test a swamp runner on a vtwin also, but I need a bigger boat for that haha and thank you for your support and being subscribed to the channel for so long, I really appreciate that Bo!
JTgatoring
Great
The issue I see with the vibration is that the shift that you had to cut to install the Backwater kit might be the issue. Second is that the shift is shorter then that of the Swamp runner.
I thought that too, but after talking to a few people, they all said that cutting the output shaft length on the engine wouldn't do that because the center of gravity never changed and therefor would not disrupt the balance of the engine. For the second point, that could be a factor. I was also thinking that the swamp runner shaft has bushing along the inside of the shaft to help support the inner shaft. I do not believe the backwater has any support inside the shaft except for at the ends. This leaves the entire shaft length to do what it wants and could cause vibration
Bro, I'd package that thing up and send it back to Jake. Its NPR performing like it should and that's just not acceptable. I'm sorry you're having a awful time with it.
Yeah its unfortunate. I still want to put some more hours on it and see if it will smooth out. I'm starting to think that these kits would be good on a vtwin engine so their is less chance of vibration, but for a single cylinder engine, I don't think I would recommend it.
Got to put that thing in some mud!!
It's coming! Right now there isn't too much thick mud, but there is some soupy stuff. Their will be some video of that soon
Don’t know if I should get a long tail or a outboard I want the speed of a outboard but I’ll be running in a river so a long tail is more reasonable.
All about your needs. There are positives and negatives to both. Just depends on your priorities and what you value most
@@JTgatoring I’ve decided on getting a mud motor since it’ll fit my needs better but now I’m stuck on which brand I should get are there any brands I should really stay away from?
@@carson2042 After the experiences I have had, if I were to purchase a longtail it will be a swamp runner. I have had too many negative experiences with the other thai longtail companies along with having other people that have shared their negative experiences also. I would choose a swamp runner over a backwater due to the affordability and performance. Jake at Backwater was great to deal with but for the cost of the backwater, it just didn't perform to the standard I was hoping for. The only time I would recommend a backwater to someone is when their bottom width is greater than 48" because a thai longtail doesn't like boats wider than that. So I would recommend a swamp runner. That is the only brand I would feel comfortable enough recommending to somebody.
These are surface drive I can tell already by looking behind you that you're not even throwing a rooster tail which means your pillar propeller is totally under the water there should be a rooster tail behind that thing if it's running surface drive so if you get the right color propeller combination you'd be a lot faster
The backwater kit does not run a surface piercing propeller. The entire prop runs under the surface of the water. They can not run a surface piercing propeller due to the short shaft length which requires a ride plate or "cavitation plate" to keep the prop from being unmanageable or hard to handle. With the ride plate being submerged or riding right at the water level, the prop is located under that plate and therefore is completely submerged
I can't get over the angle of the motor and shaft.
Yeah, thats an idea though. I never thought about getting a video from the side to show how the engine rides and the shaft angle. That would be a good comparison to show
why dont you use the electric start on your engine?
I didn't want the cables in the way. With testing multiple kits on this engine, I didn't want to keep attaching and reattaching the cables/battery. I would also have to have another battery, even though it could be a small lawn mower battery, I still didn't want the extra clutter in the boat for right now. I don't mind hand cranking it for now
What is all the weight are you carries !!!
This is the weight of the front deck, trolling motor, battery, cooler, the contents inside the cooler, person weight, and fishing gear.
I’m going to pick up a Lowe 1436l next week and I see tons of people using mud motors up here in north Florida and I’ve always heard for my area they were good. I have no experience whatsoever with mud motors but I’m thinking about putting one on this boat anything specific I should know?
A 1436 is best paired with a 13hp engine. A 6.5hp or 8 hp would work if you're on a real tight budget. A 22 or 23 hp engine would be too heavy and too much power for the transom on it, so stick with a 13hp engine or smaller. With the 13hp engine being a single cylinder engine, I would not recommend this backwater kit. It vibrates too much. So I would recommend a Swamp Runner kit. The Medium Kit fits the 13hp engine. If you plan to go faster than 20mph, the 100" shaft would be best, but if you don't like the idea of a longer tail, the 85" would also work perfectly. There are surface drive engines, but those really only come into play once you get into bigger boats and engines. I don't see many surface drives with a 13hp engine.
Can u turn easy with the backwater?
Depends on what you are comparing it too. Not as easy as an outboard and the same as any other longtail
Did you disable the governor in the motor?
No, I did not. This is a bone stock engine in all my videos so far. I would like to have some modified engines, but so far I have kept it stock so people know the bare minimum they should be able to get out of their engine.
@@JTgatoring Disabling the governor will free up a lot more power. It's easy and requires no additional parts.
@@ericthered9655 That is correct, but I would like to keep it a stock engine so when people watch these videos, I can say that the engine is bone stock and not modified so that they have a realistic expectation of what speed they should be getting with these different longtail kits and predator engines.
@@JTgatoring I understand. It would still be stock. The only difference is it wouldn't restrict engine RPMs. It's your call. I'd like to see what it would do without the governor. I'm sure that's how pretty much everyone would run it.
@@ericthered9655 There are a good amount of people who do not feel comfortable modifying their engines. There are also those who want the engine as reliable as possible and don't want to touch it that way. The issue you run into with a longtail and a good reason to leave the governor attached is because you can go from full load prop in the water to no load in less than a second when you get a prop blow out. That is when the governor steps in and saves the engine. I think it is safer to keep the governor attached. I would rather provide information that everyone would be able to replicate rather than give numbers people most likely won't achieve. I have a light boat, I'm a light guy, and I could really get this engine pushing some RPMs, but most people aren't 150lbs, riding solo with a 135lb hull. It would be fun to do and push the limit, but that also takes more time and money that I do not currently have.
I don’t like the backwater kit, go back to your original SPS Swamp Runner Thai Longtail Mudmotor.
Once I finish up a few more videos, I will be putting the Swamp Runner back on to test a few things
Can you send it back? Thanks Der Guy.
I'm still playing with it to try and see if it will get better. I paid for the kit and it is what it is. I wouldn't feel right about sending it back.
@@JTgatoring I hear ya. Good luck Der Guy. Safe Boating.
I have a 1448 jon boat any recommendations on a mud motor for this
Depends on your hp rating for your boat. Most people I hear put a 22hp on it but some also put the 13hp on it. No matter the size (a single cylinder or v-twin), if you get a Thai longtail, you will need a 100" shaft. I don't recommend the backwater unless you are getting a v-twin engine and want to spend the extra money, it will just be slower. If you're going to be running a lighter load most of the time, then a 13hp would probably do you well, but if you consistently have a heavy load the 22hp would probably be better. Just depends on what the boat is rated for.
I've got a 1448 alumacraft running a 22hp predator with the swamp runner large kit (100" shaft}, no complaints.
@@dalereamiddleton7192 thank you
So I'm still buying the Swamp Runner Kit then?
For a single cylinder engine... yes
i had a mud skipper for two years with zero problems. it was still running good when I sold it for something else... he has a problem with every company besides swamp runner. isn't that odd.. he just keeps buying all these other comapnies products when the swamp runner already works? oh and the company that makes the swamp runner and mudskipper in thai land are owned by brothers...
I recommend the swamp runner because it is has the best chance of working for the person buying it. The mud skipper kit didn't ride good at all for me and the boat I used and I had the same experience with the beaver dam kit. My luck with both the mud skipper and beaver dam kit was bad so therefor I do not recommend them to others... there is a whole series on it explaining why. So if a kit doesn't work for me, why I would I recommend it to others? Same goes for the backwater kit. The backwater kit had so much vibration in the handle that my hand would go numb. Why on earth would I recommend that kit to someone else after having that kind of experience with it? I'm fully transparent jin lim
@@JTgatoring they are literelly the same thing...the one you tested was the lower end version that they sell for 295 . the MUD-SKIPPER® PRime version that is more is exactly the same as the swamp runner. they look like they were made in the same factory and then just a different logo and different bolts.....the oposing companies that make them in thailand are owned by brothers lol...
I think the mudskippers were made in the sps factory too...if you look at the cks address it's not a factory...
I see yall changed the skag on the newer swamp runner but the tail used to be the same too
@@jinlim6575 but they are not the same. There are many differences. Watch the videos and you'll see why. Also, even if there were the same product, swamp runner has a better warranty, better customer service, and has more parts & tools for their kit owners when compared to mud skipper. So yes, I will recommend swamp runner over a mud skipper at this point in time.
So Glad I did not go that route!
Yeah, its a solid built kit, but for the price and performance the swamp runner is the go to
JESUS CHRIST IS THE WAY THE TRUTH AND THE LIFE!!!!!
This is too much. I don’t know how anyone can compare a Backwater to a Thai kit and say the Thai kit is a better product. I’ve ran Backwater products since 2013 and I’ve encountered a handful of people in that time who said Thai kit was just as capable as a Backwater. Those people are FOS. Now a Thai kit may very well be faster, but you’re running in water deep enough for an outboard anyways. Run the outboard if you want speed. Your Thai kit is going to go to pieces when actually subjected to an environment meant for a mud motor. Too many people have had positive experiences with Backwater. I truly question the intelligence of anyone who makes the claim that any of the Thai kits are overall superior to the Backwater it.
Well, I do speed tests in open water because its where most people start from. Not everyone starts in the rough. Most have at least a mile run before starting to work their way into their spot. Testing it in the same spot, in open water, gives all the mud motors the same environment with as little variants as possible. It keeps the tests fair. Speed plays a big part when people are looking for mud motors. If I'm getting 15mph with the backwater and my hunting buddy is going 20+ with his swamp runner, it's like being tied to a dock. The swamp runner isn't "going to pieces" when I need to use it as a mud motor. If you've experienced that, then inform me of it, but you're trashing one product and being very biased of another. The parts of a backwater kit are quality parts, but costing double or triple the price of a swamp runner, I would expect the backwater to perform better, if not two or three times better, but yet it vibrates more than the thai kits and is also slower.
JESUS CHRIST LOVES YOU SO MUCH!!!!