Welding Bed Build Pt 2
HTML-код
- Опубликовано: 6 сен 2024
- Things are going pretty well considering its just me working on it. May take a bit longer than I was hoping because of things that came up but it will get done eventually. Thanks for watching everyone.
Check out my website: panicfabricati...
Follow my IG: @_j_moffitt
Business account: @panicfabrications
♫Music By♫
●Danny Evo - Save Me [Bass Rebels Release]
●Song - • Danny Evo - Save Me [B...
●Download/Stream - www.bassrebels...
The background music makes this video so calming to watch. Soothing music and welds. Good combo
I've built a couple of beds, with no plans like your doing and when your done you'll look back and and wanna change every thing. So get ready, LOL.
Nice shop! Like what you're doing with the truck bed!
Thanks!!
Awesome job man, I have a 1963 C60 single axle with original straight 6, building hauler/welder/ roadside assistance bed, thanks for sharing yours bro!
Thanks man!! And no problem
The final hight looks like its going to be reasonable to work off and easy to get into all the boxes, cool man.
Thanks man, and that’s the plan anyway haha
For lights I would cut out holes use standard trailer style bulbs with black rubber you can get leds but the regular are dirt cheap Napa always has them there just clean looking curios to metal list
I want a custom toolbox flatbed maybe 12foot. A 2 foot backpack box to keep 4 dogs in open to the cab from the back window. Artic fox 990 camper behind that on the final 10 foot. Need a Ram 5500 to correctly haul this beast with a crew cab.
Can you go into detail on making mounts to bolt things to the frame
Brother got that “ layout game “ down - good stuff
More or less I subscribed. I'm in.
Damned nice work, I like where it's going. And yea, looks like you nailed the bed height.
Thanks!!
Just discovered this channel & loving it! How does this guy not have waaaay more subscribers? Anywho, you have at least 1 more. Keep up the amazing videos!
Welcome !!
Great video as always! I’m planning on building my own rig at the end of summer when work slows down. I like that you take the time to explain everything your doing as you do it. The only thing I’ve had a hard time with plain to build this bed it the tool box lids so if you can take a little more time to explain everything on them that would be awesome! Sweet video have my notifications on so I can see the next video as soon as it’s up!!
Thanks man!! I should get to the lids in the next vid so I’ll try and remember to take a few minutes there
I love the build. Watched all parts. But what I'm still stumped on before I start my bed, is the latches. You never showed installing any. I've seen rigs with hidden latches. Or wireless remote latches. Also questioning whether you add any weather stripping to the "dry" boxes?
They are fairly dry without weather stripping but I’m going to add it when it’s painted and yeah I still haven’t gotten any latches for it ya haha
I was also wondering on your dry boxes. Did you well them solid on the outside of the Box or the inside of the Box?
What size sheet are you using for the skirts and boxes? I'm starting a build as an electrician, my 5500 has tons of room so I wanna build something in this ballpark. Obviously catered more towards my trade, but similar. Thanks!
Wat size plate yu use? N tubing?
And last where yu get these kinds of songs
Awesome nice job bro I love frat bed trucks super cool video nice nice job 👍👍👍👊👊👊
That is looking nice!
Thanks man!!
Bed is looking sweet gotta be a small fortune in steel
You wanna play - you gotta pay!
Enough to see a hit lol
Amazing video like always!! I just subscribed to you brotha!!! Thank you for sharing and keep enjoying what you do!!! You inspire me
Looks awesome but man I'm not sure how those short circuit mig welds will hold up should of went with 3/32 7018 its ductile I do realize it would of took way longer
Mig welds hold up just fine
Awesome job great video, thanks for sharing.
Thanks!!
Need part 3,4,5,6,7,8,9 or just 3 😂
Nice job Sir look good
Haha thanks!!
is the steel sheet you are using for this project 1/8" or 5/32" thick?, good job thanks for share?
Great vid but I have a question and your not the only person I’ve seen do it but why all the tacks instead of full beads
I tack everything first to get it fit properly and then go back and weld it, also if I were to weld every piece as I go the amount of warpage would be irreversible.
@@j_moffitt ok thanks because I like seeing full welds and I’m about to graduate from school with my certs so I was looking to start getting myself in the door for rig jobs
Great job so
Thanks!!
What thickness of HSS & Plate for these style of beds?
I THINK THIS GUY MIGHT BE THE BEST FABRICATOR ON YOU-TUBE. AWESOME BED BUILD VIDEO SERIES! I MAY HAVE MISSED IT BUT, WHAT IS THE GAUGE OF THE SHEET METAL?
Haha, Not even close but thanks!! 1/8” plate
Just wondering what did you stuff the fuel line with? I noticed it doesn’t have a cap on it. I wanna make a bed for my truck but welding near the gas tank makes me a lil weary lol
I think I just stuffed a rag in it and taped a bottle over it, diesel is a bit more forgiving, be careful if you have a gas vehicle
What thickness sheet metal and tubing are you using?
11ga (1/8”) and same for the tubing except for where the gooseneck and bumper hitch are I used 3/16” for that
So what is his day job?
What thickness sheet steel are you using? I'm trying to come up with A plan to build mine. Looks like roughly 3/16" which i was debating between 1/8" and 3/16"
1/8”
Where did the other truck bed you were working go?
Still got it, just pushed to the side for a bit
Is the bed 8 foot wide. Why not bring it to the outside of the tires?
Stance
Just wondering if your going to building fender flare's or step's to get in the bed?
Great work man!!
Thanks!! Gonna do some sort of fender and definitely a step somewhere near the machine so I can fuel it
What size sheet metal are you using? Gonna build a bed for my f350 soon.
1/8”
Awesome video man glad that I stumbled upon your channel. I love watching videos like this that are informative because I want to study to become a great welder like you man. Do you have any tips on where to start?? Thanks in advance!👌🏽
Thanks man!! I started welding in my shop you see now by myself, I bought a cheap welder and just started welding and it was obviously horrendous at the beginning haha but with RUclips’s help you catch on quick and you build from there, I spent any free time I had just welding because that’s what I wanted to do
What thickness are you using for your sheet metal?
1/8”/11ga
Nice bed is all that sheetmetal 11 gauge?
Yup yup
Where in Central Florida are you located? I'm in East Orlando. Would love to check out your shop sometime. Keep up the awesome work!
Thanks!! Im about an hr and 15 west of central Orlando and my shop isn’t really anything special lol
Projects more so. Like I'm doing airbags on mine too and you showed that I don't have to do the same old bag over axle. You have convinced me to definitely get a plasma cutter because I don't feel like using a cutting torch and grinder on everything. Keep up the awesome work
I gotcha haha the plasma cutter is a must have in my opinion, it makes projects so much easier and I think about how did I even do projects without one??... and then I remember how many cut wheels I killed lol
💪
Leaving for music; we aren't watching 10min man and it's ... Sames song?
Mute it bruh
What brand of lights are those your using for the back?
PartsAm I believe, got them on amazon
J_Moffitt do happen to know the brand? I’ve been looking everywhere for lights like those but can only find ones with the red lenses
Cade Ostrander “partsam”
@@cadeostrander9940
Optronix are life time guaranteed, check them out..
carlos perez thank you!
Let me know if you sell it!!!!
You want it??
@@j_moffitt very interested
Email me: jesse@panicfabrications.com
Oh no. I think i saw you weld down hill mig on thick steel haha jk.
🤓
Try and talk a little less in your videos.great job