Great video Joe, thanks. Finished my Coyote chassis build last week. Went with Element enduro axles, 2 low trans with Holmes Crawlmaster 1800kv and mini V3. Made a short chassis run and so far so good, love that 10 degree angle. Still working on a body for it though.
At this point in the world of lcg chassis. I mean it is hard to tell difference at this point. Props to coyote, for making it work. And making a high quality product. I mean you almost need same setup for diff chasiss to compare…that is tough. I’d buy one of these all day before I bough vrd a pro or an Amazon chasiss….go small guy Gspeed, TgH, Brazin, dlux……..coyote, Rock Pirates…. Gonna def check your inserts out!
I had to come back to watch this since i ordered my chassis today. I'm looking forward to more of your videos on this chassis and to see what your final thoughts are. Keep the awesome videos coming.
I know those shocks, been waiting to see those on a truck of yours. I run those pitbulls on my redcat, they are awesome. Super smooth never leaked a drop, money well spent.
Cameron's chassis must be very good and desirable as they sell out quickly. Def need some high clearance links on that 10 degree angled breakover skid.
Have you seen the ugrc trail dr. It says it's a new release not sure how new I'm not up to date on stuff but seems like a nice chassis based off the de.climbestine but allows you to use stock trx4 skid and 2speed trans for 100 bucks feel like that could be one of the beat bang for the buck mod for any trx4 owner
I'm guessing all of your inserts are for 1.9x4.75 tires, but I don't see that listed on the descriptions. Might be handy for those that don't know that's your standard tire.
I'm looking to buy the holmes hobbies silent esc to run my holmes 2250kv team spec or a 2040kv v3 shorty as u have here. I was worried it not be able to run wide open throttle at all, and it burn up. I tryed a castle mamba micro x years ago with a 17.5t Novak motor in a comp crawler an it was fine in the house, but outside wide open it went 20 foot an burnt up. Wasn't hot a all. So that's scared me away from tiny esc's. I tend to run all mambaX on every crawler. Lol except for my team spec 2250kv motor in my vattera c10. It's one sw4. But want the quite am32 everyone says is the best.
Nice build. That chassis looks an awful lot like a gspeed even the geometry of it.I ended up getting my pro portal axles in and put them on a hilo chassis set up and it seems to work great. Haven't had time to run it through the ringer cause I'm currently building a hilo 6x6 capra axle build.
![ARGENTINA vs. PERÚ [1-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 12](http://i.ytimg.com/vi/xtI25ENDDSY/mqdefault.jpg)
Awesome video, Joe. I really appreciate you taking the time to review my chassis.
Glad to see you getting the much deserved recognition, such a great platform you have made!
Great video Joe, thanks. Finished my Coyote chassis build last week. Went with Element enduro axles, 2 low trans with Holmes Crawlmaster 1800kv and mini V3. Made a short chassis run and so far so good, love that 10 degree angle. Still working on a body for it though.
This is an awesome chassis! Cameron is a dedicated builder check out his channel to see this chassis in more action.
Best rc shocks in my opinion..
That's an awesome build desert rc awesome work
That chassis looks to be a beast
Amazon sells a tire break in tool that goes on your drill….you can scrub in a g8 tire in under a minute each! Costs under $20. Well worth it
A tgh 2.low with an outrunner is such a nice clean setup
This is so good to see you so awesome to see desert RC on here Good job Joe
At this point in the world of lcg chassis.
I mean it is hard to tell difference at this point.
Props to coyote, for making it work.
And making a high quality product.
I mean you almost need same setup for diff chasiss to compare…that is tough.
I’d buy one of these all day before I bough vrd a pro or an Amazon chasiss….go small guy Gspeed, TgH,
Brazin, dlux……..coyote, Rock Pirates….
Gonna def check your inserts out!
Or IERC
100 every build needs ierc gear freaking love my bumpers and sliders made for creep body from them!!! So nice merge chasiss right?
@@rcarty419 🏁🏁🏁
I had to come back to watch this since i ordered my chassis today. I'm looking forward to more of your videos on this chassis and to see what your final thoughts are. Keep the awesome videos coming.
I know those shocks, been waiting to see those on a truck of yours. I run those pitbulls on my redcat, they are awesome. Super smooth never leaked a drop, money well spent.
😁👍
Cameron's chassis must be very good and desirable as they sell out quickly. Def need some high clearance links on that 10 degree angled breakover skid.
Hey can you do a shock shootout? You can use this chassis to compare a bunch of different shocks to see who is best.
IDK man shock oils weights springs and all are a major thing with any shock. we can just look at what leaks and what doesn't.
'Kai-Oh-tay' as in Wile E😁
Have great day
When are you going to do some more upgrades to the element enduro se
👍👍😁
Have you seen the ugrc trail dr. It says it's a new release not sure how new I'm not up to date on stuff but seems like a nice chassis based off the de.climbestine but allows you to use stock trx4 skid and 2speed trans for 100 bucks feel like that could be one of the beat bang for the buck mod for any trx4 owner
Haven’t seen that
I'm guessing all of your inserts are for 1.9x4.75 tires, but I don't see that listed on the descriptions. Might be handy for those that don't know that's your standard tire.
Still waiting to see a NegativeG chassi kit tested at the expolex. It's not just for trx4 axles
I wanna see an IERC Merge or Empire, I'm willing to send him one😮
I'm looking to buy the holmes hobbies silent esc to run my holmes 2250kv team spec or a 2040kv v3 shorty as u have here. I was worried it not be able to run wide open throttle at all, and it burn up. I tryed a castle mamba micro x years ago with a 17.5t Novak motor in a comp crawler an it was fine in the house, but outside wide open it went 20 foot an burnt up. Wasn't hot a all. So that's scared me away from tiny esc's. I tend to run all mambaX on every crawler. Lol except for my team spec 2250kv motor in my vattera c10. It's one sw4. But want the quite am32 everyone says is the best.
I haven’t killed one of his esc’s yet. I even have one in the almost 10lb Thor truck on 2.2’s.
Nice build. That chassis looks an awful lot like a gspeed even the geometry of it.I ended up getting my pro portal axles in and put them on a hilo chassis set up and it seems to work great. Haven't had time to run it through the ringer cause I'm currently building a hilo 6x6 capra axle build.
👍😁😎✌️
What transmission is that & where can I get one?
Cool 😃💪
Do you have a link for them shocks ?
9t 32 pitch ?? Or 64
32p
Its literally just a gspeed made by a different person 😂😂😂😂
How is a 10 degree high clearance angled skid the same as any gspeed?
@@DesertRockCrawler still does the same lines the same way 😂😂😂
Hey Mr. Joe, how can I send you an IERC chassis kit? I sent you a dm on insta