🎥 How to Make 3D Hologram Projector with Resin (Super Clear) - Resin DIY
HTML-код
- Опубликовано: 16 май 2019
- 🎦Today I will show you how to make a 3D holographic projector using a smartphone in 2 minutes.
🎥Don't use cd, don't use water bottles, resin Improved version (Super Clear). LifeHacks | Easy to crack | 3D hologram project.
【 All Resin Art Supplies 】
From Beginner to Expert, Only Here ↓↓↓
tools.buzzresin.com
【 Material list 】
1. Epoxy Resin: amzn.to/37ACrVw
2. Resin Making Kit (Supplies and Tools): amzn.to/3AV4lNl
3. Resin Pigment (24 Colors): amzn.to/3B3YoO3
4. Silica for making dried flowers (1.4 LBS): amzn.to/3NGgufl
5. Plexiglass sheet (5"x7" 0.043" Thick): amzn.to/3xg2d0V
6. Disposable Gloves: amzn.to/3ve8AU0
7. Large Silicone Sheets (15.7 x 11.8 inch): amzn.to/3NBq8Qj
8. Silicone Resin Measuring Cups Tool Kit: amzn.to/4aqnU03
9. Vacuum pump for resin (2 Quart): amzn.to/3v86PaZ
10. Mica Powder Pure: amzn.to/2Kvf0Ha
11. Silicone mold: amzn.to/3v9cKfY
12. Mini Handheld Heat Gun: amzn.to/48cEu1V
13. Sandpaper (120#-5000# 9x3.6 Inch): amzn.to/3S1laPL
14. Resin Polishing Past: amzn.to/3gw8sD9
15. Wax Polish: amzn.to/3TzowKF
16. LED String lights: amzn.to/3XKGwl3
【 Resin Tutorial 】
Polishing tutorial: • How to sand and polish...
Get Bubbles Out tutorial: • 5 Ways to Get Bubbles ...
Preserve Flowers: • 🌼How to Dry and Preser...
Hi everyone.
Hope you enjoy my video. Thanks for watching! 😊
Subscribe and like it. 😘
Subscribe: ruclips.net/user/buzzingfish?s...
Facebook: / buzzingfish-1174141296...
Pinterest: / buzzingfish
Instagram: / buzzingfish.resinart
#crafts #diy #hologram 
Хобби
I tried this and here are some tips for the ones who are planning to do this:
1. Don't be like me and buy a thick plexiglass if you don't have the right tools to cut it. So basically I didn't realize that the plexiglass that was used in this video was that much thin and I bought a plexiglass for about 2.8-3 mm thick and the cutting part was so hard.
2. Be very careful while you are drawing the 0.15 part because if you don't draw them just the same it will be hard to tape them together after you cut them and it may not be balanced if you don't draw them same. The ones that I did weren't the same so it ended up being a bit unbalanced but it stands on the phone perfectly fine. And if you don't draw them same there can be some gap between the two plexiglass and if that happens the resin and hardener can leak through those gaps so be careful about that too.
3. You don't really have to put the resin and hardener but I can assure you that the image is definitely more clear.
4. And if you didn't understand what he did on 1.41, you are not alone cause I didn't understand too but what i did there was: I got a piece that could cover the bottom of the hologram from the pieces that remained after cutting the plexiglass and I glued the piece under the hologram with a silicon gun don't worry I was able to take it of when the resin was dry enough to not to leak from the bottom
5. I actually didn't use the measurements that was given in this video for resin and hardener but instead I put the resin two times more than the hardener ( actually I guess this is the right ratio for resin and hardener but idk)
6. The resin and hardener mixture that I used took nearly ten hours to dry and I left it near the window (I thought fresh air may help it to dry faster) but drying time may last different depending on the resin and hardener that you use
7. Don't sop in your fingers to the resin it doesn't come of very quickly
I guess that's all,but you can ask questions if you have any:)
which hardener did you use?
Resin does not dry, it polymerizes... Putting it next to a window won't speed things up
Yo that was really useful thanks! Have you thought about doing this with a tv? Or a monitor?
@@sharvareesinkar1027 so this is gonna be a little late but; i don't specifically remember the brand but what i got was like a duo package, like there was resin and the hardener for it they came together so i guess you can buy smt like that. Sorry for the late reply
@@themichalby yepp but i didn't know that back then
I am currently making one out of glass. But I would be open to making a resin hologram. Thanks for the amazing idea!
Absolutely majestic! Beautiful job.
Thanks a lot Richard Katzman 😊
man-ive burnt many brain cells watching resin tutorials for hours tonight trying to get influenced-but this blows me away
Thank you. This is very simple, I think you can do better than me. 😉
Same Idea came in my mind earlier but I don't have enough resources for doing this. Thanks for implementing this. Now I am satisfied 🙏🏻
One day I'll make video on same🙏🏻
Oh this is just gorgeous...
Thank you so much. 😊
@@BuzzingFish really helps
I made one of these with clear plexiglass, but due to the thickness, I got ghost images. After searching for a thinner plastic sheet, I came across this video, which convinced me to go with the resin result. It is the clearest and easy to clean, and the projected image seems to be in the center of the prism.
i like how the edge display on that phone just goes off to the side. very practical.
Haha, I like it too. 😉
Amazing! Thanks for sharing it!
Thank you. 😊
Sooooo very cool. Beautifully done.
Thank you. 😊
Omg, I have to do this!!! Thanks 👍👍
I'm glad you like my work, thank you. ❤
Really it is Amazing this is the best 3D holography I have seen and helpful to explain... Thank you a lot
You are welcome, thank you for your love of my work. 😊
Hologram*
Very good
@@BuzzingFish its amazing. Question, how would you make one that projected a bigger image? do you ahve to do it on a larger monitor and create a larger pyramid? for instance replace the smartphone with a large flat screen tv.
Красота!!!!👍🤗
That is very cool!! I gotta try this!!
Very good makes a change from dried flowers.
Its super satisfying thanks bro
Parabéns pela idéia....obrigado!!!!
wow ! best 3D holography i have seen..
Chiththawega, you are welcome, I'm glad you like my resin work, thank you. 😊
it's amazing,,, keep it up, buddy.
Thank you. 😊
GOOD WORK 🤯 ❤
thank you for the tip I really needed that I need a scale
Ótima ideia!! ❤️
I was roaming here and there for measurements😅.. finally got it
very clean work man
Thanks a lot Marc Rebuffet 😊
Wicked cool!
muito bonito e criativo!!!
Fantastic mind blowing 😍
Very good tutorial, thanks alot
Hello!! That's amazing! I mde it for poject for School an it really function 😁😁😁
Thank you. 😊
oh, wow! this is great! great idea!! blessings from KY
Thank you. Greetings from China. 😉
c'est magnifique
Just loved it
Just thank you 😘😘😘
Use to do up one of these with laminate but this looks amazing
Thank you. 😊
It's the future
Thank's
Keep
It up
✌️.
Thank you a lot. It's easy to make, you can make it. 😊
Thanks for sharing.
Thank you. 😊
Muy buen video gracias, ahora puedo ver figuritas bien facheras facheritas
Wonderful!
Thanks a lot My Doan 😊
That's so great. good technique. I also do art like you
Amazing
Very nice!!
Awsome bro
It is a projection Head Up Display (HUD), the same as on an inclined car windshield or airplane cockpit, in which optical information is reflected from the source. It is better to use one small oblique sheet of glass. For a test than to produce a complicated sculpture from plexiglass, because the disappointment of depiction and the work involved is great. It's a lot, far away to the hologram and nice just on the PC monitor. :)
I was thinking diy electric fireplace, the logs are what drive me nuts about the fake gas fireplaces.
@@andrewyork3869 I could advise you on this if you do not want to buy an artificial fireplace. First you need to simulate the 3D depth of the fireplace, which you will achieve with an oblique mirror. You place an old monitor in a fake chimney that has the inner shape of a fireplace. You can get the wood burning loop from RUclips. The effect is better than gas and fake logs. It's a good idea to try it on a cardboard model to get an idea of how to make it.
@@DL-kc8fc thanks I will try that, much more straightforward then what I was planning.
Wow!!👏
Wow this is amazing. Do you sell that resin mould already made? I need yo buy one as i dont have time to make one :)
What measurements and what angles does the pyramide have?
Thanks for answering
Crazy!
Haha, you can make better and more crazy than me. 😊
So cool 😊 👍
Thank you so much. 😘🧡
Very good🎉😊
I wonder if you made 2 and bonded large tops to each other with uv resin would it show on top also
Its littttttt~
una maravilla , me encanto
Gracias, esto es muy simple de hacer, tú también puedes hacerlo. 😊
@@BuzzingFish quisiera saber qué mesclo para llenar al holograma para que se haga sólido
@@yhoeledinsona.6186 El líquido utilizado en el video se llama resina. Puede encontrarlo en la búsqueda de Amazon para "super clear resin".
@@BuzzingFish una pregunta solo es resina lo que mesclo
Great Job Very Nice Video
こんな方法が、ありましたか
簡単で良いですね
Wooooow😲😲🌹🌹thanks dear
Dis is awesome
عاشت الأيادي علئ عملك الجميل
شكرا جزيلا. 😊
This is very cool I'll probably do this myself. It really isn't a hologram, but still... very cool.
You can try to make it. I think everyone can do better than me. If you have any questions, you can leave a message on my channel at any time. 😊
v.v. amazing
Hello @Buzzingfish great video. I would like to know why you mentioned other things to buy in description like flower drying crystals, and other colour kit. Is it sufficient to buy Clear epoxy art resin + Hardner? And do as you shown in video. Please educate me as I am not asking you not out of knowing but I am making the product so it's important. Please reply back. Also mention how long it takes to dry at room temperature?
amei
I had the same idea..it would make a great hologram...
You can try to make it, I think you will do better than me 😊
We just tried a 3mm plexiglass. There is no way one can cut this with a simple box cutter (or an acrylic cutter for that matter). Either you used way thinner plexiglass, or a laser cutter (or both). We tried it with CD cases and a box cutter, and the cuts certainly looked rough. The project still works but we could have avoided to pay $19 for the 12x12 plexiglass sheet that's linked in your material list. Love the project, though!
Friend, where do you get those, in pharmacies, hardware stores or manual materials?
One of the better diy pyramid vids but it does not give the effect of free floating now but rather embedded inside like a tilted screen.
Still very impressive
..Simply mind-bending!!!....Where to get that epoxy rain and hardener from and how long it takes to get hard? 👌👍👌👍
Is it necessary to build a pyramid? Or can u make the corners round?
It is preety cool
Very nice 👍👍👍👍👍
🔥🔥Awesome🔥🔥!!!Sir can u please tell me what u stick on the top of the pyramid with glue and how do u remove it?? @2:30
Hi bro I'm here for 1 like . Great work👍
Thank you so much. 😊
dope
amazingggggggggggggggggggggggggggggggg!!!!!!!!!!!!!!!!!!!
Muy bonito ingenioso y sencillo
Gracias 😊
Wow
إبداع
You used a 3:1 ratio with your resin but the resin you linked to says to use a 1:1 ratio. Which is correct? Is the linked resin the one you actually used? Thank you!
Is it a transmission holography or reflection holography?
Супер!
Which kinds of liquid used in your tumbler?.
Please tell.
【質問】そのスマホの機種・スクリーンの大きさはどれくらいですか？
How many thickness of plexi glass do u use?
It's amazing... Plzz Can u share the amount of epoxy resin and hardner u took... I'm totally addicted to ur videos.. Keep uploading more videos..
Thank you. In the description of the video there is a list of materials, and a link to purchase. The liquid I use is called resin, high-definition transparent resin. You can search "super clear resin" at Amazon. 😊 You can search for "resin kits" at Amazon and buy a lot of materials for resin work. 😊
@@BuzzingFish I dnt hv a weight machine... Can you Plzz share with me grossly the amount of resin and hardner u took... Loved ur videos.. 😇
@@swahasengupta5934 Thank you. 😊I am using resin:hardener(3:1), but there are other ratios, such as 2:1, 1:1, you need to see the description of your resin.
@@BuzzingFish Thnks a lot.. Keep uploading more beautiful videos 😇
@@swahasengupta5934 It is difficult for the beginners, I know a brand on Amazon name "LETS RESIN" you can find the clear resin and resin mold to try.
what kind of white latex did you use?
How does it look like from the top or side top angle?
Магия )👍🏻
Благодаря ти. 😊
樹酯的成像是否比壓克力清晰許多？
En résine c'est quand même plus beau.
Merci beaucoup 👍
Good
Thanks for this vedio
Awesome work! The effect of those holograms is much more vivid through the epoxy resin!
Funny how many people will probably ask you a thousand questions without ever checking the description where you already answered everything needed with amazon links provided... and rest assure at the end of the day, probably 80% of those asking all the questions won’t even get around to actually trying to make the thing.
Que heemoso te quedo a mi me salio diferente me gusta ❤️
Que le metieron
@@eduardoserratos1665 no yo lo ise con una piramide de cristal sotenida a la inversa con un cilindro en un augero de tergopol .
Which tipe of plastica do u use for the model??
Es lo maaas ermoso del mundo entero
Muchas gracias. 😊
Does the water can make it better than the normal one?
beautiful ! song name btw ?
This video is super fabulous!!
I have one doubt: you used a 3:1 ratio for resin: hardener in your video. However, there are resins with a ratio of 2:1/1:1 available in the market. So is it suitable to use them for making Hologram?
Waiting for your early reply as I have to make one at the earliest. Thank You!
Different resins are used in different ratios, you only need to look at the description of the purchased product, there are 1:1, 2:1, 3:1😊
What’s the largest you could scale this up to?
Been waiting to bring back Michael Jackson
????
If we want to use an LED TV to enlarge the display, will it be possible? Would the resin being too heavy to be put on the screen? Thank you!
You can use a led TV to magnify the display, but the 3d projector also needs to be made larger, too heavy is not a problem, you can add a layer of tempered glass between the TV screen and the 3d projector. 😊
Where do you get that resin buzzfeed